AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with a direct drive motor. SEAT (LxW): 16 x 16, 18, or 20 inches. The back height is 16 to 18 inches. The seat height is 20 inches. A seat belt is standard. UPHOLSTERY: Black padded nylon upholstery. ARMRESTS: Swing-back, height- adjustable padded armrests. BRAKES: Wheel locks. Wheel lock extensions are available. CASTERS: 8 x 2 inch cast aluminum caster wheels with air foam tires. WHEELS: 10 x 3 inch molded rear wheels with pneumatic tires and puncture-resistant tubes are standard. Tires with airless inserts are optional. FOOTRESTS: Cam-action swing away-footrests or legrests with roller bumper and heel loop. The calf pads are padded. The front rigging length is 16 to 21 inches. Elevating legrests (noted with an "E" in the model number) are available. OPTIONS: IV rod attachment; tray; oxygen tank holder. POWER: Uses two deep cycle U-1 batteries (not included) with 5-amp, 24-volt external charger (included). A 10-amp charger and a direct battery charge harness are optional. SPEEDS: 4.6 miles per hour for a range of up to 20 miles per charge. CAPACITY: 220 pounds for models 1450, 1450E, 1450N and 1450NE or 280 pounds for models 1450W and 1450WE. WEIGHT: 81, 84, or 87 pounds.
print close directions