• Human-Translated Fact Sheets and Video
  • Large Print
Category: Mouse and Track Ball

Dining Chair With Torso Support

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

CUSTOM ADAPTATION PURPOSE: To provide support while eating for an individual with Parkinson's disease who leans to the right when fatigued. The dining chair was created from a standard office chair with a high back and a central metal back post. Because the chair was intended only for use over short periods, a single thoracic fin was added to adapt the chair, rather than the usual pair of fins. A plywood mounting plate was fixed to the right armrest and the back of the seat with metal brackets. The fin was fitted with two 5/16-inch threaded studs projecting sideways which fit through the mounting plate and were secured by wing nuts. To allow height adjustment of the fin, its mounting plate was attached to the plywood mounting plate by screws through a set of holes in a vertical line to permit incremental sdjustments. To limit the swivel of the chair to 90 degrees, the hub around the center column was used to mount a wooden base fitted with two 90-degree stops. A timber striker was bolted in place on the under side of the seat and extended sufficiently to reach the stops on the base plate. To lock the seat at each 90-degree stop, a spring-loaded aluminum latch was installed at each location. A lever installed at the side of the base was connected to the latches by fine stainless steel wire. When the lever was moved to a stop, both latches released so the seat could be moved to the required position; when the lever was released, the seat locked in position. The five-legged wheeled base of the chair also needed to be fixed to the floor to prevent movement when the seat was turned. The chair was placed on a mat and the base was fitted with four press-down door stops that could be foot operated to keep the chair in position. TITLE: Chair Support. JOURNAL: TAD Journal. REF: Volume 26, Number 2, July 2006: p. 18-19. PAGES: 3 (including cover).

Available

Price Check
as of: 
04/22/2007
Additional Pricing Notes: 

Contact manufacturer

Made By:

Technical Aid To The Disabled (TAD)
Technical Aid To The Disabled (TAD) Organization Type: 
Manufacturer
TAD is a charity organisation that has the authority to fundraise. TAD uses volunteers dedicated to the design, construction and provision of aids for people with disabilities. Members of TAD provide a resource pool comprising a range of design, engineering, rehabilitation, computer, therapy and other professional and technical skills. Aids custom-designed by TAD volunteers are described in the TAD Journal.
Address: 
Email address: tad@tadnsw.org.au
Web Address: 
http://www.tadnsw.org.au
Tags: 
Therapeutic Aids
 
Processing...


Driving Walking/Biking Public Transit  Get Directions