Step 1: Materials & tools
1. Polystyrene sheet
3. Small bolt and nut
The sucker must work as you can see in this small movie: https://www.youtube.com/watch?v=9zTmW5Ne0OQ
What TOOLS do we need to make the EZegg?
2. Laser cutter
if you don't have a laser cutter, use a small saw or a knife to cut the different parts.
Step 2: Download the File
You can download the file here:
It's a PDF file that you can use for laser cutting or as a template for the dimensions.
Step 3: Add your logo (optional)
If you want to add a logo or text on the EZegg, do it.
You can give the product your own touch.
(Adobe illustrator for this)
Step 4: (Laser) cut the parts
With a laser cutter
1. Load the file into the laser cutter
2. Place the polystyrene plate in the laser cutter
3. Start laser cutting
After a couple of minutes you should have all the parts, with the correct dimensions
If you don't have a laser cutter:
1. Print the file
2. Mark the dimensions of the different parts on the polystyrene plate
3. Cut out the parts
Step 5: Connect all the parts
If you have al the parts, you can connect them together.
You connect the pieces together by using the perchlorethylene.
Lacquer the sides that you have to connect.
Connect the sides and press them together.
Step 6: Attach the sucker
The last step is to attach the body to the sucker.
This is a simple bolt - nut connection
Step 7: Use it!