Category: Low Vision

How To: Make Your Own Stylus

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

How To: Make Your Own Stylus is a do it yourself stylus designed for those individuals with upper extremity disabilities to use their touchscreens.

Technical Specifications: 

Step One: Gather materials.

  • Plastic highlighter
  • 3 feet bare wire. We used floral wire.
  • Small piece of conductive foam*
  • Electrical tape
  • Pliers
  • Scissors

Step Two: Start by removing the innards of the highlighter. Use pliers to remove the tip and the felt ink by removing the end plug of the highlighter. The artist will be left with these parts: an empty highlighter shell, the end plug, and the cap.

Step Three: Thread the wire through the barrel of the highlighter so that the wire is coming out both ends.

Step Four: Tightly wrap the wire around the piece of foam, which should be cut into something about the size of a pen cap. Make sure the wire is tightly wound.

Step Five: Grabbing the other end of the wire, pull the foam into the highlighter so that just 1/4 inch of the tip remains showing. This is the pointer for your stylus.

Step Six: Wrap the remaining wire around the barrel of the highlighter, making sure that the wire covers the highlighter from top to bottom. A hand touching this wire is what creates the charge to control the touch screen.

Step Seven: Using the electrical tape, wrap the barrel of the highlighter with the electrical tape. Many fun colors are available.

Step Eight: Trim the foam at the tip to a rounded point. Don’t trim too close, the artist still wants about 1/4 of an inch of foam for their stylus tip.

Available

Price Check
as of: 
04/17/2019
Seller(s): 
How To: Make Your Own Stylus