• Human-Translated Fact Sheets and Video
  • Large Print
Category: Upper Extremity Disabilities

DIY Homemade Switch Activated Pouring Measuring Cup Instruction Sheet

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

Homemade Switch Activated Pouring Measuring Cup is designed for to help individuals with limited upper extremity strength and coordination as a result of a stroke, multiple sclerosis or arthritis that impacts their ability to pour ingredients during a cooking activity. 

Purchased Materials

Needed:

On-Stage 6 inches Gooseneck  $5.99

On-Stage TM03 Table Microphone Clamp  $6.88

1.5 In. PVC Connector  $.65

BM-4 Mirror Ball Motor  $10.00

Scrap wood 1 inch x.5 inch x.5 inch $0

Industrial Strength Velcro  $1.50

1 cup measuring cup  $2.00

3.5 mm Audio cable with male and female ends  $.50

Thin copper sheet   $1.00

Total Cost: $28.52

Cost of device retail: $180.0

Materials

Drill and bits

Clamps to use while drilling

Craft glue

Double sided sticky tape

Scissors o Index card

Technical Specifications: 

Step 1:

Gather the gooseneck and clamp and attach tightly.

ALTERNATIVE: Purchase a spring clamp at local hardware store. Drill a hole in one of the arms, insert a 5/8 inch wide bolt and screw gooseneck tightly into the bolt OR salvage a clamp from a desk lamp and attach gooseneck with a 5/8 inch wide bolt.

Step 2:

Gather 1.5 inch PVC Connecter and drill. Clamp down PVC tightly and drill a ½ inch hole in the PVC pipe. Twist the gooseneck tightly to PVC, stop twisting when the top of the gooseneck is flush with the inside of the PVC pipe

 

Step 3:

Obtain scrap piece of wood. Mark the center of the rectangular side of the wood and drill a hole equal to the size of the rotating arm of the mirror ball motor. (You may need to try several sizes of drill bits on a different scrap piece of wood to find the size that creates a snug fit.) Squeeze craft glue into the hole and attach to motor arm, wiping excess glue.

Step 4:

Cut a piece of Velcro to match the size of the wood. Squeeze glue onto the wood and adhere the Velcro. This will assure a firm hold. Do the same for the measuring cup. Be sure to test out the direction the measuring cup will be pouring to attach the Velcro to the correct side.

Step 5:

Make battery interrupter. For instructions on making a battery interrupters, visit the following website:

http://www.instructables.com/id/NoSolder-Battery-Interrupter/

Step 6:

Attach motor to PVC pipe. Run wire through PVC and push the motor through the hole. Stop when the PVC is slightly over the ON/OFF switch of the motor and firmly attached.

Author:  suresureshel E-mail Shelley.Jewell@gmail.com with questions.

Available

Price Check
Price: 
28.52
as of: 
05/11/2015
Additional Pricing Notes: 
Estimated cost for purchased materials.
Seller(s): 
DIY Homemade Switch Activated Pouring Measuring Cup Instruction Sheet
 
Processing...


Driving Walking/Biking Public Transit  Get Directions