One Hand Camera
Adjustable Universal Shoulder Stock
The Adjustable Universal Shoulder Stock is a do it yourself device designed for use by individuals with fine motor or grasping disabilities or arthritis. The device is use for cameras, binoculars, spotting scopes or other hardware with standard ¼ inch tripod threads. The shoulder stock is designed as assistive hardware to make birding more accessible to people with a hand steadiness condition, but really improves steadiness of hand-held optics for everyone.
The Camera Fun is a custom adaptation designed for photography students to be able to use a point and shoot camera with ease. In the lid, there is a small piece of glue stick the designer glues to the top of the lid that corresponds to the button the user pushes to take a picture. When the user puts the lid on the box, the sponges (seen around the top edge of the blue box) hold the lid up so the glue stick is sitting just above the button. When the user pushes down on the lid, the stick hits th
DO IT YOURSELF" ENTRY---- Using PVC to stabilize a DSLR camera is designed for use by individuals with limited strength in their upper extremities as a result of fractures or neurological events such as stroke and Parkinson’s disease.
Modification to Bertus52x11's Left Handed dSLR Holder
Modification to Bertus52x11's Left Handed dSLR Holder is designed for use by individuals who have use of their left arm only as a result of a fracture, amputation, or stroke. The original idea was to add a thumb hook to the tripod connecter underneath, allowing the camera to be held steady with just the left hand. Before you read further, please go and check out his original slideshow. All credit for this idea belongs to bertus52x11.
One Hand Camera
CUSTOM ADAPTATION PURPOSE: To enable an individual who has had a stroke and lost use of one arm to operate the zoom lens of a camera while holding the camera in position to look through the viewfinder. The solution was to make a nylon gear with serrations that match those on the zoom lens, and two ball bearings to enable it to move freely. This is held in position against the zoom by a brass plate formed to clear the camera’s other functions and fixed to the tripod mount on the bottom of the ca
Selfie Stick Assist
The Selfie Stick Assist is a 3D printable camera and phone mount that attaches to either the user's wrist or forearm. The device is intended for all users but is recommended for those who are in wheelchairs, walkers or have mobility issues and can't reach out to take selfies. The device is attach to the users forearm and wrist in order to extend the stick and take your selfie.The selfie stick can also be adjusted to different angles in order to fit the users needs.