The 6922 Grip Covers are handgrip cushions for crutches, cane handles, and walkers. These spongy pads are made of 1/4-inch thick ventilated foam. DIMENSIONS: 6 inches long; fits handle diameters up to 1 inch. COLOR: Black.
The 6924 Forearm Crutch Covers are foam covers for forearm crutch cuffs. These vinyl coated covers slip on over the cuffs. SIZES: Small, to fit child size cuffs, and Large, to fit adult size cuffs. DIMENSIONS: 0.25 inch thick. COLOR: casa tan or black.
The 8-inch Crutch Bag, model 70200, is a carrying bag for standard axillary crutches. The bag hangs off the crutch handle using 4-inch loops that may be unsnapped from the bag. This lined caddy is made of coated nylon and features a spring-action hex frame opening which is operated by simply placing the fingers in the middle of the frame and popping it open or pushing on the outside to close. Opening and closing of the frame does not require manual dexterity or strength. DIMENSIONS (HxWxD): 5.25
Gives people with limited grip and hand strength additional control of walkers and canes. Band attaches to the handgrips of the walker or the cane shaft using hook-and-loop fastener. The user places the fingers in the band creating an enhanced grip. The elasticity in the band provides greater control and ensures a secure grip. Also useful for products that require a firm grip and swinging motion such as gardening tools, brooms and mops.
The Ableware Crutch Bag is a carrying bag for a crutch designed for use by individuals with walking or balance disabilities. This carrying bag has a deep pocket for carrying personal items, and a smaller front pocket that provides storage for items such as cell phones, wallets or keys. The bag attaches to the side of the crutch and will not interfere with movement. This bag can also be used with walkers. The bag can be machine washed and dried. DIMENSIONS (LXWxD: 9 x 6.5 x 2 inches. COLOR: Blac
Arm Pads, model 6131, are crutch underarm cushions designed for use with axillary crutches. These rubber pads fit wooden and aluminum crutches. COLOR: Gray.
The Bariatric Crutch Hand Grips-Solid are crutch hand grips designed for use by individuals with lower extremity or walking disabilities. These handgrips are used on the manufacturer's model 8130 crutches and are replacement grips for these crutches. The contoured grips are designed to limit rotation and keep the user's hands comfortable. CAPACITY: 1,000 pounds. COLOR: Solid grey.
The Cane/Crutch Holder, model 70324, is a spring-loaded clip designed to grip any cane or crutch to a table, desk, or counter. The clip has a foam rubber pad on each side to keep it in place. The holder will accommodate shafts from 5/8-inch to 1-inch in diameter.
The Cane Holder, model 70325-0002, is a double-clip holder that allows a cane or crutch to be suspended or secured against any tubular structure such as a table leg, walker, commode, wheelchair, or lawn chair. The non-marring, plastic clips have grooved gripping surfaces. DIMENSIONS: 3 x 2 x 1.75 inches.
The Cane Holder, model 0113, is designed to stabilize crutches or canes against a counter or table when not in use. The small unit clips onto the cane/crutch at any height, and the holder rests on the edge of any horizontal surface to balance the cane/crutch by gravity.
Axillary crutch underarm and handgrip cushion covers. Washable. Polyester blend. Slips over rubber crutch underarm cushions and hand grips. Velcro closure. Fits all standard crutch pads.
Carry Crutches are for use by individuals who use crutches to for ambulation. It is 3D printed a mechanical gimbal designed for carrying drinks on crutches. In addition, the designers developed a computer-controlled version, which uses a battery, two servos, an Arduino Uno and a MPU-6050 gyro and accelerometer sensor. A third variation included a laser-cut tray with holes for cups and utensils.
Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.
Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.
Contoured and angled handgrip of neoprene sponge with metal reinforced center. Completely replaces wooden crutch handgrip. Uses standard crutch hardware for attachment. Will fit all standard adult and medium size crutches. Width 4 1/16 inches.
The Crutch Accessory Kit, model T70040, is a set of crutch tips, crutch handgrip pads, and crutch underarm cushions designed for use on wooden or aluminum axillary crutches. The set includes two reinforced rubber underarm pads (model T70010), two solid tube-style crutch handgrip pads (model 70020) with extra-thick cushioning, and two rubber crutch tips reinforced with metal washers (model 70034). DIMENSIONS: The crutch tips fit crutches with 7/8- or one-inch shafts. COLOR: The handgrip and under
The Crutch Accessory Kit, models 114 and 115, are crutch underarm cushion covers and crutch handgrip pads designed for use by people with walking, mobility and lower extremity disabilities who use axillary crutches. Each kit includes two covers that fit over the underarm portion of the crutch and two pads that wrap around the handgrip of each crutch. The pads are made from sheepskin and fasten with Velcro closures. All covers and pads are machine washable and dryable. SIZES: Regular (model 114)
The Crutch and Cane Holder, model 92, is designed to mount to the back of a wheelchair. The device features a strap and buckle at the top and a cup attached to the tipping lever to secure the crutches or cane.
The crutch and cane rack is constructed of ash hardwood and is equipped to hold up to 30 crutches and 10 canes. The mounting hardware is not supplied. DIMENSIONS (LxH): 60 x 17 inches; rod extensions are 15.5 inches from the wall.
The Crutch Bag is a carrying bag for a crutch designed for use by individuals with walking or balance disabilities and others who use crutches. This crutch bag has a large zippered compartment to keep personal items such as wallets, checkbooks, medicine and other small items. It has stabilizer back straps that attaches to most standard-type crutches just above the hand grip to prevent swinging. The straps attach to the handle with hook and loop closures. Shoulder straps are also included for ove
The Crutch Bag is a carrying bag for a crutch designed for use by youth and adults with walking or balance disabilities and others who use crutches. These lightweight bags are designed to fit standard wooden, bariatric and aluminum crutches that are at least 4 feet, 3 inches tall. The Crutch Bag features an interior storage compartment for personal items such as wallets, keys, water bottles and other small items. An outer pocket can hold a cell phone, providing easy access. The Crutch Bag can be
The Crutch Bag for Scooter is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a scooter. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a scooter using a bungee tie (included) and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIM
The Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIMENSIONS (HxWxD): 20.5
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bag attaches to handle of crutch to assist in carrying small items. Instructions are provided to make a small bag with gussets to attach to the side handgrip of a crutch. Includes drawing. SKILLS REQUIRED: Sewing. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .
---- PROTOTYPE --------- PURPOSE: To design a prototype of crutches which can transform into a seat to rest the user's tired legs for individuals with mobility, lower extremity or walking disabilities or a person recovering from an injury. These forearm crutches are made from plastic polymer and have an arch-type construction so that the hand grips can be joined together to form a small seat. The user can lean the joined crutches up against a wall to form a seat on which the individual can lean
Crutch Cozies are crutch underarm cushions designed to provide extra padding for individuals who use crutches. These cushions are designed to protect the user against chafing and discomfort. They are made with a triple thickness of soft, durable fabric that slips over the armrest of the crutch. COLOR: Black, camouflage, charcoal gray, dusty blue, sage green, or chili.
The Crutch Grips are crutch handgrip cushions designed for use by individuals with balance or walking disabilities or others who use crutches. These lightweight pads are designed to fit standard wooden, bariatric and aluminum crutches that are at least 4 feet, 3 inches tall (adults) or wooden or aluminum crutches between 3 feet, 4 inches and 4 feet, 3 inches tall (children). The Crutch Grips are made of thick high density body contoured foam padding with a cotton cover. They wrap around a crutch
The Crutch Handgrip Covers are crutch handgrip cushions or walker handgrip pads designed for use by individuals with lower extremity, balance, or walking disabilities. These handgrip cushions are intended to help reduce pressure and chafing. Made of plush fleece fabric, these handgrip cushions have Velcro-style closure and are designed to fit all underarm crutches and most models of walkers. COLORS: Black, cobblestone, moss green, grape ape, peek-a-blue, orange fuzz, or tickled pink.
The Crutch Handgrips are handgrips designed for use on most crutches. These cushioned grips help provide comfort for individuals using ctutches. The grips are washable and persperation resistant.
Crutch Handgrips are handgrip cushions made of molded sponge rubber with a ribbed inside surface. The handgrips come in both an open style (6018) and a closed style (6475).
DO IT YOURSELF ENTRY --- PURPOSE: To keep his wife’s crutches handy from her wheelchair, Mel Nowland, a retired engineer, mounted a loaf pan to the bottom of the chair with electrical brackets. He added Velcro straps to fasten the crutches in the pan so his wife can carry them with her. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, No. 3, May/June 2004. PAGES (including cover): 4.
The Crutch Organizer, model C125, Crutch Bag, model C140, and Large Crutch Bag , model C145, are carrying bags designed for use by individuals who use crutches. These waterproof nylon bags attach to the crutch handgrips with Velcro loop loc straps and have Velcro closures. DIMENSIONS (HxWxD): Model C125 is 5.5 x 8 x 2 inches; model C140 is 10 x 6 x 3.5 inches; and model C145 is 12 x 10 x 3.5 inches. COLOR: Black.
The Crutch Pads are crutch underarm cushions designed for use by adults and children with walking or balance disabilities and others who use crutches. These lightweight pads are designed to fit standard wooden, bariatric and aluminum crutches that are at least 4 feet, 3 inches tall (adults) or are between 3 feet, 4 inches and 4 feet, 3 inches (children). The pads are made of thick, high-density, body-contoured and have a 100-percent cotton fabric cover. Each pad fits tightly over the top of the
Crutch Pads are underarm cushions designed to pad the top of axillary crutches to make them more comfortable. The pads are made of molded sponge rubber with a ribbed inside surface.
The Crutch Pocket is a carrying bag for crutches designed for use by individuals with mobility or walking disabilities. Designed to carry small items, this pack is made with two layers of soft polar fleece surrounded by a cushioned layer of medical-grade foam. It is designed to fit most standard adult- and youth-sized underarm crutches without removing the existing rubber pad or the hand grip. A Velcro-style closure keeps items securely inside, with an additional outside pocket for extras. COLOR
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Molded plastic finger splints to allow a quadriplegic child with no active finger motion to hold on to and propel crutches. Describes finger splints and provides a drawing and photographs of how they work. SKILLS REQUIRED: Plastics. AUTHOR: Carter, C TITLE: Crutch Splints for a Quadriplegic Child JOURNAL: American Journal of Occupational Therapy REF: Vol 33 no 8, Aug 1979: p 527-528 PAGES (including cover): 2 1979.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Retractable metal rod attached to crutch tips for increased safety when walking on ice. A wooden block is screwed onto a metal faceplate slotted to permit a metal rod to slide up and down the middle of a crutch and lock into place. The block is bolted to the crutch just under the handgrips. A small hole is drilled through the crutch tip to allow the point of the metal rod to extend beyond the crutch tip as needed. Includes photograph and diagram. COMME
The Crutch Tips are crutch tips designed for use with most crutches. These crutch tips are designed to provide skid-resistant traction and have extra tread for improved durability. The tips are available in Standard with a standard base for short term use and Extra Large with an extra-thick base for long-term use. DIMENSIONS: Tip size is 7/8 inch.
The Crutch Tips are designed to fit on the bottom of crutches for better traction. The tips are made of natural rubber with a swivel design for traction and flexibility. Shock is absorbed by a large cushioned base. The tips have wide vacuum sealings grip. DIMENSIONS: 1 7/16 inch diameter base x 2 inches high (Medium, $1.65) and 2 inch diameter base x 3 inches high (Super, $2.75).
The Crutch-Mate Gel Arm Pads are crutch underarm cushions designed for use by individuals with walking or balance disabilities and others who use crutches. Intended to reduce a crutch's friction and help prevent chafing or skin breakdown, these arm pads are made of stretch fabric that surrounds 0.375 inches of glycerin gel thickness. The pads fit over the crutch core and attach with hook-and-loop closures. They can be wiped down with a damp cloth and mild soap or disinfectant.
The Crutcheze Crutch Bag is a carrying bag for a crutch designed for use by individuals with walking or balance disabilities. This carrying bag has a stretchable pouch that includes an inside liner pocket to keep personal items such as wallets, electronic devices and water bottles. Other features include removable adjustable front and side straps that allows the user to attach the bag at the underarm or hand grip of the crutch. The bag is made of durable stretch fabric that is machine washable.
The Crutcheze Crutch Padded Covers are crutch handgrip pads underarm cushion with covers designed for use by individuals with balance, walking, mobility and lower extremity disabilities and others who use crutches. The set includes two underarm covers and two wrap hand grip covers, each with 2 pieces of removable contoured design padding. These contoured pads fit all standard youth and adult underarm crutches. The padded covers wrap around the crutch handles and are held in place by hook and loo
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted crutch holder for an adult with cerebral palsy. This individual works as a disability advocate and often spends most of her eight-hour work day at her desk. She was leaning her crutches against her desk just inside her office door; however, this was causing a safety issue since the crutches partially blocked the entrance and at times they would fall down and would be difficult for this individual to pick up. Based on a wood
“DO IT YOURSELF” ENTRY --- PURPOSE: To adapt crutches with pockets for storage of everyday items such as a book, eye glasses, Kleenex, etc. for persons with mobility disabilities. The pockets are made of videotape boxes cut in half and spliced together; although, duct tape alone or other thin-type boxes can be substituted for shape and structure. To make pockets for the crutches, tape across a nice-sized box, straight around the crutch frame. Taping on a diagonal keeps the pockets stable. Posi
The Easy Klaw is a cane or crutch holder designed for use by individuals who use canes. This unit turns any flat surface into a convenient support stand. Set the unit on the edge of a flat surface and it sticks in place, ready to hold and the extra-wide opening provides access for larger diameter items, including crutches. The rubberized grip does not slip or scratch. DIMENSIONS (WxDxH): 3.5 x 4 x 1 inch. WEIGHT: 12 ounces.
Easy-Up is a handgrip attachment and walker handgrip extension bracket standing aid designed to alleviate discomfort and build greater self-reliance for persons with mobility disabilities. Composed of high impact molded polycarbonate, these standing aids are attached along the sides of a walker and are intended to help users rise from a sitting position without assistance in a variety of places: Chairs, couches, beds, and automobiles. WARRANTY: Three year limited warranty on material and defects
The Endurance Crutch Grips are crutch handgrips designed for use by individuals with lower extremity or walking disabilities. These contoured grips are tapered so that they are smaller at the heel of the hand and larger near the front to keep the hands from slipping forward. DIMENSIONS: Grips fit crutch posts .875 inches in diameter.
The ErgoCap Ultralite Universal Cane and Crutch Tip are designed for use by individuals with balance, lower extremity, or walking disabilities. The cane tip is intended to allow security, comfort, and stability to be achieved and reduces the vibration and impact with the ground. This product is made of non-slip, long-lasting rubber with special stabilization wings to provide steadiness at any angle, allowing the user to walk more naturally and comfortably. The device is a lightweight tip is a pe
The ErgoCap X-Treme Terrain Crutch or Cane Tip is designed for use by individuals with balance, lower extremity, or walking disabilities. The cane tip is intended to provide stability and traction while walking or standing still. The tip also mimics the human ankle. This device is made with anti-slip, medical-grade rubber for durability.
The Extra Thick Crutch Pads are crutch underarm cushions designed for use on most crutches. The extra-thick cushioning of these crutch pads helps reduce user fatigue. The reinforced areas are designed for better fit and longer wear.
The Forearm Crutches, model 121, are forearm cuff covers or pads designed for use by people with walking, mobility and lower extremity disabilities who use forearm crutches. Each kit includes two covers that fit over the forearm cuff portion of the crutch. The pads are made from sheepskin and are machine washable and dryable. COLOR: Natural.
Gel Ovations Forearm Crutch Handle Covers are durable covers designed for people who use walkers to reduce abrasion and pressure. They are soft, easy to clean, and efficient for distributing pressure. Covers work best and fit best if put on right over the existing foam pad, handle or grip. Gel pads will not harden or soften in the cold or heat.
The Hand Grips are crutch handgrips designed for use with axillary crutches. These contoured grips will not rotate and are padded for comfort. Model 5126 is a solid hand grip and model 5119 is an open hangrip to wrap around the ctuch hand hold.
The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds
The Keen Adventure Crutch/Cane Tip is a replacement cane or crutch tip designed for use with Keen Navigator crutches and most standard canes and crutches. These tips flex 30 degrees for added stability. DIMENSIONS: Fits tips 0.75 to 7/8 inches in diameter. The diameter of the base is 2 inches and the tip is 3 inches high. WEIGHT: 3.6 ounces. COLOR: Black, blue, yellow, orange, or red.
The Kool Krutch Cuff Pads are forearm cuff pads designed for use with pediatric forearm crutches. The washable pads attach with Velcro. DIMENSIONS: Models are available to fit cuffs 1.75, 2, 2.25, 2.5, or 2.75 inches in diameter. COLOR: Multi-color pattern on a blue background or solid navy.
The Larger Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has a flap with a Velcro closure and a side pockets that are large enough to fit magazines o
The Maddacomfort Walker and Crutch Hand Pads are designed to provide cushioning for the hands of walker and crutch users. These washable terry cloth and foam pads wrap around standard walker handles or crutch hand grips and are secured by Velcro fasteners. DIMENSIONS: 6.5 x 6.75 inches.
The Mobility Clutch and Pouch is a carrying bag that can be attached to canes, crutches or walkers, a wheelchair side pouch, or a bed pouch. This pouch carries items such as keys, money, and medications and attaches with Velcro to mobility aids and bed rails. This clutch has a removable carrying strap and an outside pocket for glasses or a cell phone. COLOR: Black, red, or pink.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device prevents crutch user from slipping on wet or icy surfaces. Made of retractable, carbide- tipped point which is attached to a stainless steel sleeve. This device is designed for the Canadian cane but can be modified to fit other types of canes and crutches. Sleeve is attached to crutch with screws. COMMENTS: White glue placed on the screw threads prevent screws from loosening. SKILLS REQUIRED: Metalworking. TITLE: Non-skid Device for Crutches JOU
The Open Sytle Crutch Handrip Cushion, model 140, is a rubber handgrip with a longitudinal slit opening for application to crutches with a fixed handgrip.
Neoprene cushion for crutch handgrip. Has longitudinal slit opening for application to crutches. With fixed handgrip.
The Padded Crutch Covers are underarm crutch cushions designed for use by individuals who use crutches. Made of two layers of soft fleece fabric these cushions are designed to eliminate chafing and provide extra comfort for the user. The fabric surrounds a layer of medical grade foam. Two Velcro-style handgrip covers are included. COLORS: Black, cobblestone, moss green, grape ape, peek-a-blue, orange fuzz, tickled pink, shamrock, daisy dukes, leopard, and paisley explosion.
The Performance Gel Grips for Crutches are handgrips designed for use by individuals with lower extremity or walking disabilities. Designed for forearm and underarm crutches, the exterior of the grips are made from pliable black PVC vinyl with a pebbled texture and a shock absorbing gel pad inside. Installation instructions are included. The grips fit crutch posts that are .875 inches in diameter. DIMENSIONS: Gel pad is 0.5 inches thick.
The Platform Attachment for Aluminum Crutches, model PC 7337A, is designed for users that are unable to manipulate a conventional crutch. The attachment has an adjustable Velcro closure and a padded, Naugahyde armrest. This device will fit any Preston aluminum crutch, right or left (see separate entries). The angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for distance from the front of the platform. Platform height is adjustable.
Naugahyde padded horizontal platform to fit any aluminum axillary crutch. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for distance from front of platform. Platform height adjustable. Velcro closure over forearm.
The Pro Crutch Bag is a transport bag for crutches designed for use by people with walking, lower extremity and mobility disabilities. This bag is intended to store multiple pairs of crutches as well as air splints, knee immobilizers, blankets, and other large items for transport. When opened, the bag has multiple compartments of varying sizes. The compartments are separated by mesh so the contents are easily identified, and they feature zipper or velcro closures. The larger compartments fold i
The Right Grip is a crutch handgrip designed for use by individuals with lower extremity, balance, or walking disabilities or carpal tunnel syndrome. This hand grip is ergonomically designed to fit the right and left hand specifically. The Right Grip is intended to reduce pressure and muscle fatigue by keeping the wrist straight and supporting the palmar arch and wrist. It is sold in pairs. COLOR: Gray.
The Rolyan Walker Splint, models A7671 to A7674, are splints designed to help individuals with arthritis and neurological disabilities to securely grasp a walker handle. It features wrist straps for stability and is made from Polyform splinting material with a Kushionflex pad. The splints can be specifically adapted to each user by using a heat gun or hot water. Available for right- or left-handed use. DIMENSIONS: Determined by width of 2nd to 5th metacarpal phalangeals (MCPs). Small/Medium is 3
The Round Mobility Clutch is a carrying bag designed for use by individuals with lower extremity, mobility, balance and walking disabilities. This oval carrying bag attaches to most canes, walkers, crutches, and wheelchairs or transport chairs with two hook-and-loop straps. The bag has an outside easy-access pocket that features an elasticized top and an interior zippered pocket for storing items such as keys, cell phones or other small items. The bag easily detaches and can be worn on the wrist
The Rubber Crutch Tips are designed for use with axillary and forearm crutches. These rubber tips help grip the surface and absorb shock and are reinforced with metal inserts. SIZES: Model 5134 is large and model 5135 is extra large. DIMENSIONS: Model 5134 has a 1.75-inch opening diameter and model 5135 has an opening diameter of 2 inches.
Natural rubber crutch tip with metal disc at base of shaft cavity. For 3/4 to 7/8 inch shafts. Super base diameter 2 inches; height 3 inches. Large base diameter 1 3/4 inches; height 2 1/2 inches. Medium base diameter 1 1/2 inches; height 1 3/4 inches.
Rubber cane tip with metal disc at base of shaft cavity. For 1/2 to 5/8 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 3/8 to 1/2 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 1/4 to 3/8 inch shafts base diameter 7/8 inch; height 1 1/4 inch.
The Sheepette Crutch Cover Set is a set of crutch handgrip cushions and crutch underarm cushioon covers designed for use with wooden or aluminum axillary crutches. The set includes two handgrip cushions and two underarm cushion covers made of thick, plush Sheepette material (synthetic fleece) for extra comfort. COLOR: Ivory.
The Sheepskin Crutch Covers are crutch underarm and hand cushions designed for individuals who use crutches. Made from Medical Sheepskin, the crutch cover sets includes a cover for each crutch at the armpit and handgrip. The handgrip covers are held in place by Velcro strips.
The Sparkle Cane and Crutch Tips are cane and crutch tips designed for use by individuals who use canes or crutches. These tips are designed to glow in the dark. DIMENSIONS: These tips fit canes and crutches that are .75 inches in diameter. COLOR: Blue, green, pink, or tan.
The SuperTote Carryall is a wheelchair side pouch or a carrying bag for a walker or crutch designed to provide carrying capability for people with mobility disabilities. Made of durable machine-washable nylon, this tote features pockets with zipper closure. DIMENSIONS: 9.5 x 7 x 4.5 inches. COLOR: Blue or black.
Tornado and Performance Crutch tips are designed for use by people with mobility and walking disabilities. They feature a built-in shock absorbing system using Absorbalite surrounded by a nylon net and a 1.75 inch circular steel plate above it. Universal joint action achieved by Absorbalite's ability to compress and absorb shock. Allows for oblique crutch angles while maintaining full bottom contact with ground. Extremely long wear. Guaranteed for three months. Smaller sizes available. Sold i
The Tornado Rain Guard Crutch Tips, model T18, are crutch tips designed for use by individuals with mobility and walking disabilities. These crutch tips are designed to lessen impact and increase grip, even at an angled approach. The tips feature a shock absorbing polymer gel and a new rain tip bonded over the tread that increases resistance to slipping on wet surfaces. These tips fit all crutches with a lower tube diameter of .75 to 1 inch. DIMENSIONS: Base of tips is 2 inches in diameter. WEI
The UltraTip is a cane, crutch, or walker tip designed for use by individuals with walking, lower extremity, or balance disabilities. Made of a special soft material, these tips are designed to last four to ten times as long as traditional tips. The design provides 100 percent touchdown elasticity and a firm grip and enables the tip to flex to maintain ground contact. DIMENSIONS: Available in .75-inch or 5/8-inch. COLOR: Blue, white, red, black, violet, yellow, or silver.
The Universal Crutch Pouch, model EZ0015, is a carrying bag for crutches designed for use by individuals with mobility or walking disabilities. Made of weather-resistant nylon, this pack attaches to the crutch using adjustable straps with Velcro closure. This pack has a deep pocket, several smaller pockets, and a beverage holder. DIMENSIONS (DxLxW): 1.75 x 10 x 5.5 inches. COLOR: Black. WARRANTY: One-year limited warranty.
Walk Easy Forearm Crutch Tips are available in two models. Model T10, a pivoting tip, is designed to fit adult size crutches and is made of sand and titanium. Model T5 fits pediatric size crutches and walking canes and is made of a natural rubber compound.
Walker Pegs, model ES-720, are vertical handgrips suitable for adapting a child's walker to facilitate better posture and walking pattern. The plastic bicycle style handles are installed by drilling 2 holes in the walker's existing handles.