The Ice Finger for Oral Stimulation is an oral stimulation aid designed for use by individuals with feeding or swallowing disabilities. This latex-free tube is designed to improve oral motor and oral-pharyngeal strength and sensation. The totally sealed, malleable gel core is frozen for thermal stimulation and can be refrozen so one can be used for the entire duration of therapy for an individual. For additional stimulation, it can be dipped into sour substances. The small grip at the top makes
The Polly Power Grip is a grasping aid for hand designed for use by individuals with arthritis and other grasping disabilities. This lightweight tool has vise-like jaws that adjust to varying widths and that close by squeezing the handles and open by pulling the handles apart. This device aids in providing a firmer grip with more power for pushing, pulling, picking up, turning, squeezing, or holding. This tool can be used to turn keys; open bottles, tubes, small jars, medicine bottles (including
The Freedom Safety Booster is a transfer aid designed to aid in positioniing in bed individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pull the device toward the headboard to move the individual up in the bed. The unit is machine washable and disinfectant safe. It shou
The AliMed Standard MultiBoot is boot orthosis and foot protector designed for use with individuals with lower extremity disabilities. The backbone of the MultiBoot features a swing-out antirotation bar and a height-adjustable footplate to prevent bedding from pressing on the toes and feet. Locking slots are mated to the antirotation bar to prevent shifting. The foot is swaddled in a soft Kodel-type Velcro-closure sock attatched to the MultiBoot backbone to hold the foot without irritation. The
The Freedom Accommodator Insole, model 6810-6817, is a shoe insert designed for use by individuals with lower extremity and foot disabilities. The soft, cushioning orthosis has a contoured heel cup to cradle and stabilize the heel and a longitudinal arch supports the arch and relieves fatigue. A mild transverse arch supports and reduces pressure from the metatarsal heads. SIZES: Based on men's and women's shoe sizes.
The High-Impact Accommodator Insole, model 6490-6497, is a shoe insert designed for use by individuals with lower extremity and foot disabilities. These inserts combine the support of the Freedom Accommodator Insole (see separate entry) with Impact Plus energy-absorbing poromeric polymer. A heel pad of the polymer is incorporated into the Accommodator half-swole arch support. SIZES: Based on men's and women's shoe sizes.
The Freedom Turner is a transfer aid designed to aid in turning or transferring individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pulls the device toward themselves. Once the Turner is in place, it can also be used by one caregiver to turn a side-lying individual on to
The QualCare Basic Alarm, model 71087, is a wandering patient system designed for use with individuals with Alzheimer's disease, cognitive disabilities, or memory disabilities. This unit is secured to a chair or bed with its self-contained clip or the included hook-and-loop fastener and the activation cord is clipped to the individual's clothing. When the individual leaves the bed or chair, the pin connector is pulled from the alarm unit, activating the alarm signal. Reinserting the pin shuts of
The PIR Alarm, models 2058 and 2059, is a wandering patient system designed for use with individuals with Alzheimer's disease, cognitive disabilities, or memory disabilities. This system requires no pads or sensors and relies on passive infrared technology similar to that used with automatic doors and lights. The alarm emits an invisible fan-shaped beam that parallels the bedrail, monitoring the entire bedside. Selective beam management allows the unit to detect undesired motion only. The fan-sh
The Economy Overdoor Pulley, model 8601, is an overhead pulley exerciser designed for use by individuals with upper extremity disabilities. Used to maintain or regain shoulder range of motion and rebuild muscle strength, the unit features two handles; the stronger arm pulls the affected arm in a gentle forward stretching motion. Sand weights (not included) can be attached to the pulleys to help build strength. OPTIONS: Holding mitts to keep the hand in position.
The QualCare Grip Splint II is a hand orthosis designed for use by individuals with upper extremity disabilities. This splint features a Kydex platform that can be modified with a heat gun for custom correction that remains in position. The thumb is held in the functional position. A removable Plastazote foam pad to match contractures is included. The splint fits either the right or left hand and includes a removable, washable one-piece fabric cover laminated to foam cushioning. Model 510328 com
The QualCare Grip Splint is a hand orthosis designed for use by individuals with upper extremity disabilities. This splint positions the wrist in the neutral position with the fingers in a relaxed position midway between flexion and extension. Available for the right or left hand, this splint features an adjustable Kydex shell, two Ethafoam cylinders, hand covers,and Velcro straps. To apply, select the foam cylinder appropriate for the individual, slide the cylinder on the hand post and apply th
The FREEDOM Thumbkeeper is a thumb splint designed for use by individuals with arthritis and other disabilities of the thumb. Made of Multiform Thin Splinting material, this lightweight splint is lined with AliPlast cushioning foam, adjusts with the hand, and maintains maximum hand function. This splint supports an unstable metacarpal phalangeal (MP) joint, especially useful for those with chronic arthritis. Available for the right or left hand, this splint comes in a low-profile arthritis model
The FREEDOM Thumb Stabilizer is a thumb splint designed for use by individuals with arthritis and other disabilities of the thumb. This soft splint is made of AliSoft splinting material with padded Beta Pile straps and features a fully-adjustable thumb channel that supports the arthritic metacarpal phalangeal (MP) joint to reduce pain and collateral ligament injury pain related to grasp. Available for the right or left hand, the splint is equipped with a strap positioned through a D-ring on an a
The FREEDOM-Form Custom-Moldable Thumbkeeper is a thumb splint designed for use by individuals with arthritis and other disabilities of the thumb. Made of Multiform Thin Splinting material, this lightweight splint is lined with AliPlast cushioning foam, adjusts with the hand, and maintains maximum hand function. Available for the right or left hand, this splint immobilizes the carpo metacarpal (CMC) joint while permitting functional freedom of the other fingers. For a custom fit, the flat form i
The Freedom Resting Hand Mitt Splint, model 57210, is a hand orthosis designed for use by individuals with upper extremity disabilities. Available for the right or left hand, this splint supports the arches of the hand and the thenar web space. It maintains the metacarpal phalangeal (MP) joint in approximately 80 degrees of flexion to protect future hand function. Made of featherweight AliLight material, this splint accommodates edema and can be customized with a heat gun. SIZES: Small, medium,
The Freedom WorkFit is a wrist strap splint designed for use by individuals with upper extremity disabilities. Made of leather, this splint fits the right or left hand and permits the user to adjust the amount of wrist motion control provided by using one or two stays. The interior is foam padded to protect against vibration. SIZES: Extra small, small, medium, or large.
The Freedom Short Support is a wrist splint designed for use by individuals with upper extremity disabilities. Available for the right or left wrist, the short support focuses support where needed and is recommended for shorter wearing times and limited duration SIZES: Extra small, small, medium, or large. DIMENSIONS: 5 inches.
The Freedom Long Elastic Wrist Support is a wrist splint designed for use by individuals with upper extremity disabilities. Available for the right or left wrist, this elastic support has a carefully crafted distal edge design and an adjustable, removable metal spine. The splint can be used daily by those with degenerative arthritis or as a night splint by those with carpal tunnel syndrome. The longer forearm length ensures optimal distribution of forearm support. SIZES: Extra extra small, extra
The Type III Alarm with Bed Sensor Pads, model 75045, is a wandering patient system designed for use with individuals with Alzheimer's disease, cognitive disabilities, or memory disabilities. The sensor pad fits underneath a bottom sheet on a bed and triggers the alarm when the individual leaves the bed without assistance. The vinyl-sealed pad features Mylar-backed substrate rather than paper and connects to the alarm with a telephone-style plug. The alarm unit is designed to be highly visible a
The Original PF Night Splint, model 6019, is a night foot splint designed for use by individuals with lower extremity disabilities. This splint fits the right or left foot and is intended to reduce chronic morning pain from plantar fascitis by allowing the user to avoid foot drop and the accompanying muscle tightening. The footplate is set at five-degrees of dorsiflexion and the strap at the instep ensures that the foot sits in registration with the splint. Strap pads protect the leg and instep
The PF Night Splint II, model 60973, is a night foot splint designed for use by individuals with lower extremity disabilities. This splint fits the right or left foot and is intended to reduce chronic morning pain from plantar fascitis by holding the foot in dorsiflexion and providing passive stretching of the plantar fascia, muscles, and the Achilles tendon. Lightweight, low-profile, and trimmed of all excess plastic, the splint has a footplate that is set at five-degrees dorsiflexion with an a
The Knee Saver with Calf Straps, model 62161, is a set of knee pads designed for use by individuals with knee pain. These lightweight contoured foam pads provide gentle support between the calf and thigh to take excessive strain off the knee joint. SIZES: Adult and youth. COLOR: Black.
The Shin Saver is a shin support designed for use by individuals with shin splints or tendonitis of the calf or related lower extremity disabilities. Available for the right or left leg, these splints are made of breathable elastic material for comfortable compression. A vertical pressure bar and adjustable straps provide controlled pressure. SIZES: Small, medium, or large.
QualCare TENS Electrodes are TENS Electrodes designed for use with TENS units. Available in prewired and pin-type models, these electrodes have cloth faces and use silver-coated carbon to reduce impedance across the face, eliminate hot spots, and lower resistance. Molded wire/connector is easier to hold, connect, and disconnect. The electrodes are reusable and the rehydratable gel can be restored with a drop of water. Reusable poly pouches protect the electrodes and extend life. The pin-type ele
The Light Workout Exerciser is a hand- or leg-propelled bicycle exerciser designed for use by individuals with upper or lower extremity disabilities. The unit consists of a frame with pedals and can be used on the floor in front of a chair or a wheelchair for lower extremity exercise or placed on a table for upper extremity use. Features include manually-adjustable resistance, non-skid pads on the base, and hand/foot loops on the pedals. WEIGHT: 8 pounds. COLOR: Chrome finish.
The Cubex Therapy System on Wheels is a fine motor training kit designed for use with individuals with neurological disabilities and/or who use wheelchairs. This wheeled station accommodates four users standing and/or in wheelchairs At the ends of the unit are 90-degree fold-away work surfaces with bolt boards and a pegboard that opens to 60 or 90 degrees. Other features include a slide-out full-width plastic-laminate work surface and a reversible activity board in the top with a pegboard on one
Scoot-Gard, also called Scootguard, is non-slip matting designed to keep glasses and plates in place and prevent wheelchair cushions from sliding. This hand-washable matting cuts with scissors and can be cut to custom sizes and shapes. Antimicrobial inhibits odor-causing bacteria, mold, and mildew. Cleans with soap and water. DIMENSIONS: 1 x 180 feet. COLOR: Blue.
Tubipad Stockinette is stockinette designed for lining splints to prevent pressure siores. This product features a foam strip laminated to elastic stockinette and provides comfort for individuals who are sensitive to heat. DIMENSIONS: Available in rolls of 2.5 inches in diameter x 13 feet long, 3 inches in diameter x 13 feet long, or 4 inches in diameter x 13 feet long.
The Comfy Walker is a folding adjustable wheeled walker with seat designed for use by individuals with walking or balance disabilities. This aluminum walker has a spring-loaded seat that folds down for sitting and up for walking. When the seat is in use, the walker bars forms a back support for the user; the seat can also be used as a table when the user sits in a standard chair. When the seat is up, it angles to carry a book or handbag. The walker also features two levels of padded handgrips, o
The Dysphagia Cup is a cup with a large handle designed for use by individuals with upper extremity and swallowing disabilities. This lightweight cup features an extended handle that accommodates gripping with the entire hand or with the thumb only. The design of the cup promotes tucking the chin toward the chest which allows time for the normal swallowing mechanisms to work. The design also helps prevent liquids from escaping at the lips and directs liquids to the center of the mouth. Nose clea
AliPlast 2E (Quickstick Padding) is adhesive-backed foam padding designed for use with splints for people with carpal tunnel syndrome or other upper or lower extremity disabilities. This soft, flexible, and waterproof padding is used with splints and strap padding or tool and utensil buildups. It consists of thermoplastic closed-cell foam that is resistant to perspiration, bacteria or odors. The padding can also be used for cushioning hard edges on beds and wheelchairs. For extra strong bondi
Molestick Padding is adhesive-backed foam padding designed for use with splints. This soft, open-cell padding is easily repositioned or replaced. DIMENSIONS (TxWxL): 1/8 inch x 6 inches x 6 yards or 1/8 inch x 9 inches x 4 yards.
The Lowenstein Occupational Therapy Assessment Geriatric (LOCTA-G) is a cognitive rehabilitation evaluation program designed for use as part of an ongoing occupational therapy evaluation and treatment plan for geriatric clients with traumatic head injuries or strokes. The LOTCA-G test provides tools for primary assessment and ongoing evaluation to determine a reliable profile of the subject's cognitive abilities. Requiring 30 to 45 minutes to administer and score, 20 comprehensive tests assess t
The Palm Grips, models 6507 and 6508, are hand positioners designed to prevent finger contractures and skin breakdown on the palm for individuals who have had strokes or who have other upper extremity disabilities. These machine-washable pads permit free finger movement and have terrycloth covers to absorb moisture. An non-latex elastic band keeps the pad in place. SIZES: Small (model 6507) and large (6508). DIMENSIONS (LxW): 5 x 2.5 inches (6507) or 5 x 3 inches (6508).
The Bedside Beverage Holder is a cup, can, or bottle hoder designed to clamp onto bed rails. This unit features a flexible holder arm and an adjustable clamp. DIMENSIONS: The arm is 11 inches long and the clamp adjusts to fit rails from 0.75 to 1 inch in diameter.
Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.
The No-Rad Shields are computer screen overlays designed to eliminate glare and reflection, increase contrast, reduce static, and block 99.99 percent of E-field electromagnetic radiation transmitted through the face of video display terminals (VDT). Three models are available for a variety of computer monitors (each $139.95), and one model, the No-Rad Super Shield (R7440, $349) is designed for 19-inch monitors. COMPATIBILITY: Model R7428 can be used on the Apple IIC, Macintosh 128, 512, 512E, Pl
The Kinesis Essential Contoured Keyboard is a modified keyboard designed for use by individuals at risk for repetitive motion injury of the upper extremity. The keyboard has two separate keypads that split the traditional alphanumeric key layout of a QWERTY keyboard into right and left hand configurations. Each of the keypads is concave so that the shorter digits do not have to be stretched to reach their keys, and so that each hand maintains a flat, neutral position. The keypads are also placed
The Mouse Nest is a cursor control wrist support designed to support the entire hand and reduce wrist stress. This mouse rest moves with the mouse to aid, not impede, productivity while maintaining the user's wrist in the desired neutral position. The rest has a contoured surface with a lower hand platform and thumb and finger recesses. The mouse attaches to the platform with Velcro and is removed and reinstalled easily. The support is made of molded foam and configured for either the right or l
The Alimed Mouse Rest is a cursor control wrist support for mouse users designed to keep the user's wrist in the desired neutral position. By maintaining the wrist in this position during extended use of a mouse or track ball, excessive pressure is reduced on the underside of the wrist, and repetitive motion conditions that can lead to Carpal Tunnel Syndrome may be minimalized. The Mouse Rest is made of an open-cell, viscoelastic, self- molding layer of foam that conforms to the user's wrist, an
The Alimed Typewriter Wrist Rest, model S5244, is a keyboard wrist support designed to alleviate pressure on the underside of the wrists and to maintain the wrist in a neutral position to minimalize the effects of repetitive motions that can lead to such conditions as Carpal Tunnel Syndrome. The support is made of an open-cell, viscoelastic foam that conforms to the user's wrists, and is covered with a cloth material. The underside of the support features anti-slip material so it won't move arou
The Alimed Calculator Wrist Rest (model S5210) is a wrist support pad for calculators and telephones designed to maintain the user's wrist in a neutral position and to reduce wrist strain associated with repetitive motion tasks. The pad is made of an open-cell, viscoelastic foam that conforms to the user's wrist, and is mounted on an angled board that supports the calculator or phone. The pad is covered in a cloth material. DIMENSIONS: 1 inch thick. COLOR: Blue.
The Alimed Notebook Computer Wrist Rest, model S5361, is a wrist support pad designed to reduce wrist strain for individuals suffering from carpal tunnel syndrome. It maintains a neutral position for the wrist while reducing strain associated with repetitive motion tasks. The pad is made of an open- cell viscoelastic foam that conforms to the user's wrist, and is mounted on an angled tray that supports the laptop or notebook computer, positioning it at the most comfortable angle for typing. The
The Alimed Atex-Type Wrist Rest, model R5802, is a wrist support pad designed specifically for Atex keyboards. The wrist support is intended to reduce wriststrain associated with repetive motion tasks by maintaining the wrist in a neutral position while typing. The pad is made of an open-cell, viscoelastic foam that conforms to the user's wrist, and is enclosed in a cloth material. The pad is attached to an extention board with Velcro strips so that the wrist rest can hang over the desk edge in
The Micro-Mouse Mouse Pad, model R7928, is a cursor control device tray designed to allow the computer mouse user to work comfortably while reducing the risk of repetitive motion injuries such as Carpal Tunnel Syndrome. This foam rubber mouse pad provides for smooth mouse operation. It can be adjusted anywhere vertically within a 5-inch range. The pad permanently mounts under a desk with screws (included). The work surface swivels and tips, letting the user adjust the pad to the most comfortable
The Articulating Drawer, model R7424, is a keyboard tray designed to add valuable desk space and let the computer user position the keyboard for comfort and efficiency for individuals who have repetitive motion disorders. This non-conductive plastic drawer is housed in a steel casing which will support the central processing unit (CPU) and monitor. The tray extends 15 inches on ball bearing slides and locks in place. Once extended, the tray can be raised or lowered 5 inches. There are 7 height p
The Underdesk Articulating Drawer, model R7425, is a keyboard and mouse tray designed to add valuable desk space and let the computer user position the keyboard for comfort and efficiency for individuals with repetitive motion disorder. This model attaches underneath the desk or table top with mounting brackets and four mounting screws (included). The tray is made of non-conductive, molded, high-impact styrene and features ball bearing slides which allow the tray to be moved horizontally. The tr
The Keyboard Retractable Shelf is an adjustable keyboard tray designed to support the keyboard at the most comfortable height for each individual user, and to free up valuable workspace. This tray attaches underneath the desk or table top, and slides horizontally to a maximum of 17.75 inches. The tray has tilt adjustments to provide keyboard slant up to 15 degrees. In addition, the tray is also adjustable vertically by 5.75 inches and swivels 360 degrees. Each adjustment position is secured with
The VuRiser, model R7866, is an elevating platform for computer monitors designed to reduce neck stress by adjusting the monitor to a more comfortable eye level. VuRisers are individual platforms that, when stacked, provide one inch of lift per VuRiser. Each platform is a molded plastic rectangle large enough to support most monitor bases. Sold in boxes of 6 units. DIMENSIONS: 11.25 x 11.25 x 1 1/8 inches each. Each box provides for 6 inches of lift.
The MonitorMate, model R7929, is an elevating platform for computer monitors designed to provide a more comfortable viewing position for the user without losing valuable workstation space. The platform can be adjusted infinitely from 3.75 to 10.75 inches above the desk. It's counterbalance weight allows for adjustments with fingertip pressure. A non-skid mat keeps the monitor from sliding in the support tray. No installation is required; the platform rests on the work surface. An adjustment too
The Full Flex Valet is an elevating platform for computer monitors designed to elevate the screen to a more comfortable eye level, and to free up valuable work space. The extension arm has a gas spring that allows for easy adjustments. The arm extends, retracts, and rotates as it holds the monitor or terminal on a tilt and swivel base in virtually any viewing position. the arm lifts the base of the monitor from 7.5 to 13.5 inches above the work surface, extends/retracts 7 inches with a maximum r
The Alimed Extension Arm is a monitor arm designed to clear the desktop and keep the keyboard and monitor/terminal in easy reach for an ergonomically configured workstation. The arm rotates, extends, and retracts a swiveling monitor platform for maximum viewer comfort. A clamp mount fits desktops or tabletops up to 3 inches thick with a minimum 2-inch overhang. The platform lifts monitors up to 50 pounds to a fixed height of 6 to 8 inches above the work surface. The base clamp rotates 360 degree
The Tilt 'n Turn CRT Stand with Copy Easel, model R7431, is a monitor stand designed to reduce glare, minimize eye strain, and eliminate neck craning. The stand fits any CRT with foot separations up to 12 x 12 inches. A built- in tension spring allows full range of adjustment while in use. Anti-skid pads on the top and bottom provide stability and protection. The stand tilts up or down 12.5 degrees, and rotates 360 degrees. DIMENSIONS: Copy easel is 9.5 x 12.5 inches; stand is 14 x 14.5 x 4.5 in
The VuRyte, model R7862, is a copy holder designed to ergonomically position typing or data entry copy directly in front of the computer operator in line with the monitor screen. This reduces the motion required by the neck and eyes to perform daily data entry and keying functions, thereby reducing stress and muscle pain and increasing efficiency. The holder adapts to fit any workstation. The height may be adjusted to align the copy with the monitor for minimum head motion. Keeping the data at t
The Spring Coil Extension Assist, Type 502, is a finger extension splint (also called a Capener or Wynn Parry Splint) used to lift the finger into the extended position. The orthosis features wire and foam construction and adjustable tension. Sizing is determined by measuring the extended finger from distal palmar crease to distal finger joint crease, and should be done by a therapist. SIZES: Small (##5450, A), Medium (##5451, B), Large (##5452, C) and X-Large (##5453, D). DIMENSIONS: From Small
The Spring Coil Long Finger Assist, Type 505, is a finger extension splint designed to extend the proximal interphalangeal (PIP) joint and the distal interphalangeal (DIP) joint simultaneously for persons with tightness affecting both flexor tendons of the finger. This foam and wire orthosis features adjustable tension. Size of orthosis is determined by measuring from the distal palmar crease to the mid-distal phalanx, and should be done by a therapist. SIZES: Small (##5706, A), Medium (##5707,
The Pommel Sit-Straight is a foam seat cushion with a built-in pommel for abduction designed to reduce sacral sitting and to limit forward movement of the pelvis of individuals using sling seat style wheelchairs. The cushion has a concave bottom and a flat top. The pommel reduces the danger of adduction contracture and has a core that extends through the cushion to the cushion base for added stability. The material of the surface of both the cushion and the pommel is made of T-Foam (see separate
The Coccyx Relief Sit-Straight is a foam cushion with a convex solid seat insert base and a dished coccygeal area for pressure relief. The cushion is made of a high density foam for cushioning and support with a top layer of T-Foam (see separate entry), a pressure-relieving flotation-like foam material. The cushion is covered in Alitex, a Gortex based, breathable, waterproof fabric. DIMENSIONS: 16 x 18 inches (no. 1246) or 16 x 16 inches (no. 1247).
The Mesh Screen Overlay is a computer screen cover designed to reduce glare, and increase contrast of monitor output to reduce eye strain, dizziness, and fatigue caused by computer monitor glare. The ultrafine, angle mounted mesh mounts to color or monochrome monitors. DIMENSIONS: Sized to fit 12 or 13 inch monitors or 14 or 15 inch monitors
The Glare Screens are computer screen overlays designed to increase contrast and to eliminate 99 percent of the glare to reduce eye strain, blurred vision, and stress. These screens are cleanable, made of anti- reflective glass coated on both sides. DIMENSIONS: Sized to fit 12 or 13 inch monitors (model R7833, $52.95) or 14 or 15 inch monitors (model R7834, $64.95).
The Finger Extension Assist, Type 504, is a finger flexion splint designed to correct boutonniere deformity and to treat proximal interphalangeal (PIP) joint tightness. This orthosis is similar to the Finger Extension Assist Type 501 (see separate entry) but is shorter and stronger. Size is determined by measuring the volar surface distance from metacarpal phalangeal (MP) crease to distal finger crease, and should be done by a therapist. SIZES: X-Small (##5700, AA), Small (##5701, A), Medium (##
The Alimed Keyboard Wrist Rest is a wrist support pad for computer typists designed to fight wrist fatigue and reduce the strain on the tendons controlling the fingers and hands. This fabric-foam pad rests against the lower edge of the keyboard. Keyboard users rest their wrists on the padding to correct the wrist droop that occurs with unsupported typing. The support has a no-skid bottom to prevent the pad from sliding during typing. The support is available with the Extension Support, a thin sh
The Freedom Long Elastic is a wrist splint designed to support chronic wrist pain, relieve carpal tunnel syndrome symptoms, reduce arthritis pain, and to protect the wrist during post-cast removal. The brace is cut to insure that only the motion of the wrist will be restricted; the fingers and thumb are unimpeded. The splint is made of 100 percent nylon webbing with an adjustable aluminum spine and velcro strap closures. SIZES: For right or left hands; Extra-Extra Small (Pediatric), Extra Small
The Freedom WorkFit Wrist Support is a wrist splint designed to maintain the wrist in neutral, give support for chronic wrist pain, and dampen vibration associated with on-the-job application. The brace is made of leather with two aluminum stays plus a wide circumferential, padded leather wrist strap (next to the ulnar styloid) to provide dorsal and volar support simultaneously. The stays can be bent separately for optimal individual angle support. The splint terminates just below the distal cre
The Freedom Wrist Immobilizer is a wrist splint designed to give cast-like support while allowing near normal hand function and full thumb rotation. This splint is manufacturer recommended to post cast removal, wrist sprains/strains, and in the control of carpal tunnel syndrome symptoms. The splint is constructed to open along the radial border to eliminate the potential for pressure over the radial nerve during extended wear. The exterior of the brace is made of perforated vinyl with velcro str
The Freedom Thumb Spica is a thumb splint designed to support thumb joint pain is chronic due to deQuervain's Syndrome, tendonitis, sports injuries, or arthritis. The splint is made of an AliSoft shell and wide, elastic straps with velcro closures. The brace is adjustable, and allows for hand and finger function. SIZES: Small/Medium (fits most women and smaller men) and Medium/Large (fits most men and larger women); right or left hand.
The Basal Block, no. 9-101, is a wedge pillow and head positioner made of foam from the Alimed Positioner Foam Blocks series. The cushion is designed to support the back and shoulders with a contoured cutout for the head and neck in extensor thrust position. DIMENSIONS: 16 x 12 inches, tapers from 7 inches at 27 degrees.
The Neck/Head Rest, no. 9-021, of the Alimed Positioner Foam Block series, is a foam wedge pillow designed to support the back and shoulders with a U-shaped neck support. DIMENSIONS: 12 x 10 x 6.5 inches.
The Torso Block, no. 9-100, is part of the Alimed Positioner Foam Blocks series. This foam wedge cushion is designed to support the back at a 27 degree angle. DIMENSIONS: 12 x 16 inches with a 7-inch high rounded top.
The Freedom CTS Stop is a wrist splint designed to stop undesirable wrist motions, ulnar deviation, and to restrict all but 10 degrees of wrist flexion and extension. The support positions the wrist in neutral. The brace is cut in a unique way so that it does not pass through the web space (between the thumb and first finger), nor does it interfear with finger motion or hand grasp. A "C" clip gently, yet firmly captures the hand. The brace is made of fully padded, non-metallic Kydex shell, and
The Freedom ThumbKeeper is a thumb splint designed to treat gamekeeper's thumb injuries, support collateral ligament injuries, support arthritic joints, and maintain the thumb in opposition. The brace is made of flexible Multiform Thin splinting material. The standard ThumbKeeper has a D-ring strap closure. Cinching the closure abducts the thumb so motion at the joint is restricted effectively. The Low Profile ThumbKeeper model has the same shell as the standard model, but an overlap type palm c
The Freedom Wrist-Trainer Gauntlet, no. 5720, is a wrist splint designed to restrict wrist range of motion, support the wrist in neutral, and limit ulnar motion. The splint can be worn while learning tasks which involve repetitive motion to control carpal tunnel syndrome before it starts. The proximal edge of the gauntlet has been rolled back from the forearm, and the distal edge contours to support the palmar arch and fit below the distal crease to enable free movement of the fingers. The brace
The Canadian Knee Orthosis is a knee orthosis designed for use by individuals with lower extremity orthopedic or neurological disabilities. Designed as a knee orthosis for active serial treatment of knee flexion contractures and designed for non-ambulatory use, this brace applies a steady extension force through the knee pad and is adjusted by simply snugging the straps. Cuffs, bars, and pads are easily interchanged to allow for cleaning and individual sizing. SIZES: Child, juniot, small, medium
The Prop-It Book Rest is a bookholder designed for use by individuals with upper extremity disabilities, grasping disabilities, or arthritis. This unit holds any size printed material. It has an elastic page holder that keeps books open and loose material secure. DIMENSIONS: 8 x 11 inches when closed.
The Hand Helper II & Deluxe Hand Helper Exerciser is a hand and finger exerciser designed to improve finger and grip strength for people with upper extremity disabilities. The device consists of a rigid plastic frame with rubber bands for resistance; squeezing the padded handgrip pulls against the rubber bands to provide strengthening. The amount of resistance can be varried by increasing or decreasing the number of rubber bands (included) used. The Deluxe model has two thumb screws for adj
The Home Care Pill Box is a pill organizer designed to separate pill doses for indivuals with memory disabilities and for those who are visually disabled. Each pill box consists of seven large see-through compartments with separate lids. Each compartment lid is marked with a letter indicating the day of the week, together with the Braille equivalent and a number from 1 through 7. Where multiple doses are required, boxes can be snapped together to create a single unit capable of holding several d
The Dynafoam Abduction Wedge is a knee separator designed to prevent adduction contractures by maintaining four inches of knee separation. This sculptured wedge is made of high density foam with a machine washable, terry cloth cover and Velcro straps to maintain position. SIZES: Adult (no. 8481, $22.35) and Pediatric (no. 8488, $41.55) with 3 inches of abduction. COLOR: Cover is blue.
AliCover is a foam material designed for use as a covering for orthoses. The cover is made of AliPlast 4E (see separate entry), a closed-cell polyethylene foam. The AliPlast 4E is laminated to a durable blue knit nylon, and the cover is applied with 3M Spray 90 or another adhesive spray to attach to the splint or support. AliCover is also available with an adhesive backing. DIMENSIONS: AliCover measures 1/16 x 29 x 8 feet ($33, no. 4437) or 1/16 x 29 x 50 feet ($120, no. 4438). AliCover Self-Sti
The Drop Base is a ABS plastic solid seat panel with cutouts for wheelchair cross braces designed to allow the mounting of custom or commercial seat cushions level with or below seat rail level. The panel fits between the seat rails, with 1- and 2-inch drop hooks to fit 7/8-inch or 1-inch rails. DIMENSIONS: Sized to fit 16 and 18 inch widths.
T-Foam is a foam material designed to eliminate pressure points and absorb shock and vibration. This material is used to make flotations pads, mattresses, cushions, and padding (see separate entries). T-Foam flows to give fluid-like fit and support under body presure and heat so that pressure is evenly distributed. This material becomes firmer when subject to sudden impact and absorbs up to 90 percent of sudden impacts and vibration. When released after conforming to an impression, T-Foam return
AliPlast is a cross-linked, closed-cell, heat modable, polyethylene foam material used for a variety of orthotic applications. There are five types of AliPlast that vary in firmness and stiffness. ALIPLAST 4E: For padding and cushioning splints and casts. Tensile strength of 80 to 110; density of 4 pounds per cubic foot; compressive strength at 50 percent compression is 35 to 45. ALIPLAST 6A: Effective for foot orthotics and many types of hand splints. Tensile strength of 110 to 140; density of
Checkerboard is foam material made of high density foam cut to a checker board pattern for pressure relief. Sold in sheets.
Ethafoam is a polyethylene foam used in the underlayment of contour in seating. Foam sheets are sold 3 per case. DIMENSIONS: 2 x 24 x 3 feet.
High Density Foam, no. 180, is a firm, open-cell, ester-type polyurethane foam material designed for cushions needing pressure relieving cutouts. DIMENSIONS: 1 x 16 x 18 inches.
Neoprene is a Lycra covered foam material that is waterproof and washable. DIMENSIONS: 1/8 x 44 x 120 inches ($120) or 1/8 x 42 x 45 ($85). COLORS: Silver and Dark Red.
Positioner Foam is an open-cell polyurethane ester foam material with a density of 2 pounds per cubic foot designed to be easily cut with a sharp knife to make shapes for x-ray or seating positioning. This fire-retardant material circulates air and absorbs liquids. When used uncovered as a positioner, it resists slipping on the surface. This foam can be upholstered for applications where its ability to absorb liquids is undesirable. DIMENSIONS: 27 x 72 inches with thicknesses of 1 to 6 inches in
The T-Gel Plus Solid Seat Insert (SSI) Cushion, models 1294 and 1295, is a combination cushion utilizing the Alimed Solid Seat Insert and a dry flotation T-Gel Plus Cushion (see separate entries). The cushion is intended to correct positioning of individuals in nsling seat style wheelchairs by providing a flatter sitting base. This semi-rigid base is 3.5 inches thick and creates a more stable sitting surface. DIMENSIONS:16 x 16 inches (no. 1294) or 16 x 18 inches (no. 1295).
The Basic Wedge Cushion is a seat cushion made of high density foam designed to not flatten out under the user's weight. The wedge shape is intended to encourage a modified anterior pelvic tilt that results in upright sitting posture and discourages slipping forward in the chair. This cushion may be used in Geri chairs or wheelchairs. A No-Slip, water resistant cover is included. DIMENSIONS: 16 x 18 inches (no. 260), 16 x 16 inches (no. 261), or 14 x 14 inches (no. 1287). Thickness tapers from 3
The Sit-Straight Basic Cushion is a high density foam seat cushion with a convex base designed for use in wheelchairs with sling seats. Intended to improve sitting posture and weight distribution, this cushion is a combination of the Solid Seat Insert (see separate entry) and a wedge cushion. The wedge is intended to encourage modified anterior pelvic tilt. A No-Slip waterproof cover with front zipper is standard with the cushion, and protects against liquid infiltration. Attached straps secure
The Anti-decubitus Gel Sit-Straight Cushion is a foam seat cushion designed to fight excessive pressure and pressure sores by encouraging better posture and more uniform weight distribution. The cushion is made of fire-retardant T-Foam (see separate entry), a pressure relieving, flotation-like foam material that molds and effectively increases the weight bearing area to reduce pressure, and high density foam wedge tapered on the distal edge to relieve pressure on the thighs. A No-slip incontinen
The Profile Sitting Orthosis is a wedge foam seat cushion designed to minimize ischial tuberosity pressure. The construction encourages modified anterior pelvic tilt and, consequently, an upright sitting posture, and reduces slouching that can result from using a sling seat style wheelchair without modification. Ischial pressure is relieved by contouring and shaping the rear of the cushion. A pressure distributing layer of T-Foam (see separate entry) interfaces between the shaped cushion and the
The T-Gel and T-Gel Plus Cushions are gel flotation seat cushions made of T-Gel, an elastomeric gel with the consistencey of fatty tissue that will slide and move laterally to reduce shear forces. T-Gel will not leak or dryout, and can be cut without harm. The T-Gel Plus Cushions have the same features of the T-Gel Cushions, but with an added layer of 1-inch thick medium T-Foam (see separate entry), a pressure-relieving open-cell foam designed to provide shear reduction, self-molding pressure re
The Tubular Orthosis for Torticollis (T.O.T. Collar is a cervical collar designed for use by individuals with congenital muscular torticollis. Fabricated of soft PVC plastic and nylon tubing, this collar features short rigid tubes positioned anterior and posterior to the angle of the mandible to train and aid in positioning the head correctly. This collar is washable, non-toxic, and comes pre-assembled and ready to fit. SIZES: Child (fits children 4 months to 10 years of age) and adult (fits chi
The Freedom Short Elastic is a wrist splint designed to provide support for sports injuries, and to relieve acute wrist pain, tendonitis, carpal tunnel syndrome, or degenerative arthritis. The brace is cut to insure that only the wrist motion is restricted; the fingers and thumbs are unimpeded. The splint is made of 100 percent nylon webbing with an adjustable aluminum spine and velcro strap closures. Alternative to thermoplastic cock up splint. SIZES: Extra Small for wrist circumferences of 4.5
The Portable Easy Up, models 1220 and 1221, is a foam seat lift cushion designed to assist individuals to stand up from a seated position. The cushion adds 3 to 4 inches to the height of any chair seat, and acts to position the hips and knees at 90 degrees to make it easier to rise. The cushion comes with a carry strap and a machine washable fabric cover with zipper closure. DIMENSIONS: 15 x 15 x 3 inches (model 1220, $29.95) or 15 x 15 x 4 inches (model 1221, $36). WEIGHT: Under 1 pound. COLOR:
Quad Push Cuffs are rubber crepe fingerless gloves with thumb flaps and a Velcro closure. The material covers the heel of the hand and the base of the thumb. SIZES: Universally sized (one size fits all); may be trimmed with scissors.
Transparent Trays are lapboards made of a see through polycarbonate plastic. The trays enable open visual field for safer wheelchair mobility. Several models are available: an adult model with an anodized aluminum rim (no. 8696, $67) and an adult model without a rim (no. 8242, $72.33) with Velcro straps, and a pediatric model (no. 8306, $105.45) with Velcro straps. DIMENSIONS: Adult size models are 23.5 x 22 inches; pediatric size is 20.5 x 18 inches; all models are .25 inches thick.
The Finger Extension Assist, Type 501, is a wire and foam dynamic finger extension splint designed to lift the PIP joint from the flexed position back to the extended position. This adjustable orthosis is sized by measuring the extended finger from the distal palmar crease to the distal finger crease; see a therapist for correct fitting measurements. SIZES: X-Small (##5389, AA), Small (##5390, A), Medium (##5391, B), Large (##5392, C), and X-Large (##5393, D). DIMENSIONS: From X-Small to X-Large
Temper foam cushion is a visco elastic foam material that contours to the body. It is available in a variety of thicknesses and densities: T 36, very soft. T 38, soft. T 41, medium. T 47, hard. It comes with a polyester double knit cover. Seat cushions available 16 by 16 inches, or 16 by 18 inches.
The Postop Shoe Splint is a cast boot with an open toe. The shoe is made of a 1/2-inch thick wood sole with a non-slip corrugated rubber tread and a comfortable foam inner sole. The upper is durable vinyl with velcro strap closures. SIZES: Men's and women's Small, Medium, and Large; fits both feet.
The Dickson Paraffin Baths are designed to provide paraffin therapy to the hands, wrists, and feet in home and office settings. The baths are made of stainless steel treatment tanks of heavy gauge to resist the corrosiveness of paraffin and perspiration with contoured hard wood mouldings finished with epoxy resin. The treatment heat circuits have a maximum variation of plus or minus 2 degrees Fahrenheit to effect the fastest possible formation of the paraffin glove. High-heat circuits provide ra
The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator
The Large Wheelchair Headrest, model 75909, is a headrest designed for use by individuals with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs. This headrest is designed to increase head support and comfort with minimal loss of range of vision to the user. It is made of highly tear-resistant polyurethane designed with relief contours for the user's ears. The width of the headrest is adjustable. It has a sturdy, full length metal insert
The Extended Width Armrest, model 77382, is an add-on armrest designed for with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs, especially those who spend extended periods of time in wheelchairs. Intended to provide a wider resting surface without increasing armrest height, this armrest accommodates individuals with upper extremity edema, flaccidity, or increased tone by decreasing the risk of slippage and damage to the arm and should
The Wheel-Ease Rim Covers, model 74612, are handrim covers designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. Designed to fit over the hand rims of the push wheels of manual wheelchairs, these covers improve the user's grip on the rim to make manual propulsion of the wheelchair easier. Designed to be an alternative to gloves, these covers have a smooth finish that protect against calluses and injury. The covers can
The Uplift Premium Power Seat, models PS3017 and PS3020, is a seat lift cushion that converts any chair or sofa with arms to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on the chair or sofa, and when the user is ready to rise, he/she uses the toggle switch on the hand controller extending from the base on a gooseneck to begin the upward movement, and pla
The Playmaker Gamebreaker is a protective helmet designed for use by individuals with balance disabilities, hemophilia, seizures, and autism and others who are at risk of head, skull injuries. Designed to provide protection to the back and sides of the head, this helmet features a hook and loop chin strap combined with adjustable laces in the back to provide a custom fit for each individual. The helmet is made of closed EVA rubber foam. Lycra surrounds the outer shell, allowing air to flow throu
Skillbuilders Rolls and Half Rolls provide an adaptive shape for rolling and rocking movements, coordination and vestibular training and positioning. Thick, waterproof polyurethane coating is seam-free and allows for easy cleaning. Rolls have a solid core to help prevent "bottoming out". OPTIONS: Size options. SIZES: Various. DIMENSIONS: According to size selected. COLOR: Blue or Red. WARRANTY/GUARANTEE: As stated by the manufacturer.
The Alimed Aerocell II is a wheelchair cushion cover designed for individuals at risk of developing pressure sores. The cushion distributes pressure for even positioning for a more relaxed and comfortable sitting experience. The device is made out of black stretch nylon and its cover is washable. DIMENSIONS: Standard size is 18 inches length x 20 inches width x 4 inches depth. CAPACITY: 440 pound capacity. WEIGHT: 3.5 pounds. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.
The Type TEM Posterior Leaf Spring Footdrop brace is a temporary ankle foot orthosis. This lightweight, prefabricated brace is designed to fit up to 80 percent of users without modification, but, if needed, can be quickly customized. This model allows dorsiflexion and plantar flexion. SIZES: Available for right and left foot in 3 Pediatric sizes (Small: 8-10, 7.5-inch; Medium: 11-13, 8.5 inch; and Large: 1-3, 9-inch); adult Small (Women's 6-8, Men's 4-6), Adult Medium (Women's 8-10, Men's 7-8),
The Type C-90 Superior Posterior Leaf Spring Footdrop brace is a prefabricated ankle foot orthosis designed to fit up to 80 percent of users without modification, but, if needed, can be quickly customized. This brace provides a full range of plantar and dorsiflexion. The brace is injection molded for controlled thickness and durability. SIZES: Available for the right or left foot in Small (Women's 6-8, Men's 4-6), Medium (Women's 8-10, Men's 7-8), and Large (Women's 8-10 or Men's 9-12).
The Type C-50 Heavy-Duty AFO is a prefabricated ankle foot orthosis designed to fit up to 80 percent of users without modification, but, if needed, can be quickly customized. This stiff brace will fit in normal shoes. It provides dorsiflexion, and is trimmed low in the malleolus area which reduces medial lateral stability to allow some plantar flexion. SIZES: This stiff brace will fit in normal shoes, and is available for either the right or left foot in Small (Women's 6-8, Men's 4-6), Medium (W
The Type 670 General Purpose/CVA Training Brace is a prefabricated ankle foot orthosis designed to fit up to 80 percent of users without modification, but, if needed, can be quickly customized. This lightweight, polyethylene foot brace is trimmed high in the malleolus area to provide high medial lateral stability and plantar flexion control. This brace is manufacturer recommended as a post-Cerebrovascular accident (CVA, or stroke) training brace or for acute sprained ankles. SIZES: This brace wi
The FREEDOM SportsFit WT (models ##5124, ##5125, ##5126, and ##5127) is a reusable, prefitted volar wrist and thumb orthosis designed to protect an athlete's hand against reinjury during contact sports. This splint provides full motion for fingers, and positions the thumb in opposition to allow for grasp while protecting it against sudden, forceful stretching of the collateral ligaments. According to the manufacturer, this orthosis is game approved for high school and college football; due to th
The Plastazote Wrist Splint is a rigid splint designed to immobilize the wrist. This brace provides full range of motion for fingers and the thumb. The orthosis is secured with 3 straps on the back of the wrist and hand. The plastazote material provides softness and warmth. SIZES: Small, Medium, and Large for the Right and Left hands.
Beta Pile III Loop is splint strap material, similar to Velcro loop, made of soft polyfoam padding for long term (at least 5000 closures) loop and hook fastener applications. This strapping material is sold by the roll. DIMENSIONS: 1-inch x 25 yards (##4470 and ##4481), 1.5 inches x 25 yards (##4471 and ##4482), and 2 inches x 25 yards (##4472 and ##4483). COLORS: White or Beige.
Beta Pile II Loop is splint strapping material made of soft polyfoam between a top and bottom of soft fabric. The strapping has hook-sensitive pile on both sides, so Velcro-type closures can be made on either side. This double-sided hook feature and the fact that cut edges will never fray or unravel allows for special strap designs. Due to the polyfoam padding, stress to soft tissue is eliminated and patient compliance may be increased due to increased comfort. This strapping is sold by the rol
Beta Pile (##4192) is splint strapping material made of plush, hook-sensitive, brushed nylon fabric used to cover splints. The material is sold in rolls. DIMENSIONS: 18 x 48 inches per roll.
Alimed T-Stick is adhesive backed, open-cell T-Foam (Temper Foam). Temper foam contours and molds with body heat and pressure to match the individual's anatomical detail. This foam is used in treatment of hypertrophic scars and other conditions where even pressure distribution is essential. As tissue volume or shape changes, T-Stick padding remains in total contact, uniformly cushioning and supporting the person's injury. DIMENSIONS: 16 x 18 x 1 inches (##4160 Soft, ##4161 Medium) and 18 x 24 x
Alimed Super Constructa Foam is tough, lightweight, flexible but firm mini-cell polyethylene foam material designed for customized positioning, seating, and support systems. This waterproof foam can be used without covering or finishing, or vinyl-dipped if a tough skin is desired. The material withstands repeated compression and abuse and returns to its original shape. It can bear heavy weights for extended time periods. The foam is sold by the slab. DIMENSIONS: 1 x 24 x 48 inches (##4925), 2 x
Constructa Foam is lightweight, rigid, closed-cell polyethylene based foam material designed to be simultaneously firm, supportive, and resilient. Suggested uses are customized positioning, seating, and support systems. The foam is generally covered because its surface is somewhat abrasive to the touch. DENSITY: Medium is 2, Firm is 6, X-Firm is 9, and Super Constructa is 2 pounds per cubic foot. DIMENSIONS: Constructa Foam is available in cylinders (2, 4, or 6-inch diameter x 36 inches) and sla
The AliMed Solid Seat Insert is a semi-rigid, closed-cell foam seat cushion designed to correct wheelchair sling-seat sag by increasing seat flatness. This foam block has a convex bottom and a flat top. The convex portion fills the concave depression formed by the sling wheelchair seat. The flat, level surface created balances the pelvis, distributes weight evenly on both ischial tuberosities, and discourages side-to-side tilt. This seat insert is waterproof and smooth surfaced; there are no cra
AliMed Latex Wheelchair Cushions (models ##140, ##141, and ##142) are firm, resilient, high-density seat cushions with polyester knit covers. The cushions are made of pincore (open weave) construction for coolness, comfort, and aeration, and double knit for stretch and elasticity. The covers are zippered for easy removal. DIMENSIONS: 2, 3, or 4-inch thicknesses x 16 x 18 inches. All thicknesses available in Pediatric dimensions (16 x 16 inches) for the same price. COLOR: Covers are Navy Blue.
Hi Density Foam Cushions are foat seat cushions layered in 1-inch thick segments with a knit cover. DIMENSIONS: 16 x 18 inches with thicknesses of 1, 2, 3, or 4 inches.
The Combo T-Foam Cushion is a foam seat cushion designed to provide pressure distribution, fight pressure sores, and provide superior sitting stability. The cushion is made of trilaminate construction that combines the best of T-Foam in a single cushion. The top layer of the Combo is 1-inch thick T-Foam; the middle 1-inch thick layer is medium grade for full flotation, regardless of user weight; and the base layer is made of high-density foam that will not bottom out under hot, humid conditions.
The AliMed Seat Belt Alarm, model 77667, is a seat belt and wandering patient system designed for use by individuals with Alzheimer's disease or cognitive disabilities and mobility disabilities. This dual-function seat belt keeps the patient in the chair and sounds an alarm if disconnected. The system also includes a flashing light to help caregivers to locate the correct individual if the alarm sounds. The belt can be adjusted to patient size. The system includes a metal mounting clip and gromm
The QualCare VOICE Alarm, model 2032, is a wandering patient system designed for use by individuals with Alzheimer's disease, cognitive disabilities, or dementia. This system has a cord that can be clipped to the patient's clothing, while the alarm unit is mounted to the patient's bed or chair. When the cord is pulled from the alarm unit, a recorded message plays for 20 seconds, then an alarm tone sounds until the caregiver resets it. Caregivers can record a personal message to reassure the pati
The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod
The Headmaster Collar is a cervical collar designed for use by individuals with multiple sclerosis, arthritis, ALS/Lou Gehrig's Disease, motorneuron disease, or other disabilities requiring head support. This collar provides all around support and is covered in a soft, washable fabric. This collar has an open design that provides access to a tracheal tube is easily formed by hand to fit snugly under the chin while providing firm support. OPTIONS: Extension pads and replacement parts. SIZES: In
Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit.
Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit. This unit has a foot-shaped base, complete with toes.
The IMAK SmartGlove is a wrist support designed for use by individuals with upper extremity disabilities, arthritis, carpal tunnel syndrome, tendonitis, or other wrist and hand pain. This orthosis holds the hand and wrist in a neutral position while allowing full use of the hand. It is made of washable, latex-free cotton Lycra and provides flexible support for full use of the hand. An ergoBeads pad, located on the underside of the orthosis, cushions and protects the wrist. The orthosis is revers
The AliMed E-Z Release Seat Belt with Alarm is a wandering patient system designed for use by individuals with Alzheimer's disease or other cognitive disabilities who are at risk for falls in homes or hospitals. This seatbelt is equipped with a standard sensor unit (included) and a hook and loop fastening buckle that, once disengaged, alerts a caregiver or hospital staff that a person is about to wander or risks a fall. The sensor alarm can be attached to regular chairs, geri chairs, wheelchair
The Flat Panel Glare Filter is a glare reduction filter designed for use by individuals with low vision. Mounted in front of a high-resolution flat panel monitor, this unit minimizes glare and improves contrast. It has a double-sided, multiple-layer, anti-reflective coating on optical glass that reduces up to 99 percent of glare and reflections. A privacy option (models 79833, 79834, and 79835) distorts on-screen information when viewed from an angle. The unit includes a mounting bracket. DIMENS
The Prop-It Speech Therapists' Travel Kit is a speech therapy kit containing a stand with bookholder and other items useful for assessment and training of individuals with speech disabilities. A collapsible plastic stand supports cards, mirrors, and magnetic boards. The stand has a ledge for holding papers and books, an adjustable band to keep books open, and adjustable supports to hold tall papers and books. The kit also includes a non-breakable mirror, a steel magnetic board with a dry erase w
The Critical Communicator is a communication board designed for use by individuals with autism or cognitive, speech, or communication disabilities. Useful in medical and therapeutic settings, this communication aid is helpful for those who have difficulty communicating even basic needs on a temporary basis. Included are a pain scale, words and pictures for now (immediate attention, such as hard to breathe), pain (ache, burning, sharp), comfort (head up/down), people (husband, wife, doctor), alp
The Interactive Communication Cards are communication boards designed for use with individauls with speech or communication disabilities. Available sets include Home and Health, model 822672; Food, model 82263; Recreation and Leisure, model 82264; and Sensory and Social, model 82265. Each set depicts 120 practical and functional activities, along with common words. Words are printed on the front and back of each card. Four sentence strips encourage communicating in sentences. High-frequency voca
The Economy Hip/Knee Kit includes five products designed for use by individuals with upper extremity and mobility disabilities following hip or knee replacement surgery. The kit includes a reacher, shoe horn, sock aid with cords and built-up foam handle, dressing stick and a contoured bath sponge. These devices are designed to help users avoid bending, standing or turning at the hip when bathing, dressing and performing other activities in the home. The kit comes in a plastic bag. DIMENSIONS: Th
The Flat Screen Magnifier is a computer screen magnifier designed for use by individuals with low vision. This screen magnifier is designed for flat screen computer monitor measuring from 14 to 17 inches diagonal. It enlarges the image up to 50 percent while also reducing glare and blocking ultra-violet (UV) rays. The screen mounts on the top of the computer monitor with hook-and-loop fasteners and brackets (included).
The Thumb Helper is a hand and finger exerciser designed for use by individuals with grasping and upper extremity disabilities focused on the thumb and fingers. This device provides a variety of options to promote thumb and individual finger strength. It includes two stacking spacer pegs that attach to the frame to vary the range of motion. The device comes with color-coded elastic bands and an instruction manual. COLOR: Purple.
The TR2 Patient Alarm, 10/cs is designed for persons with severe medical disabilities who may roll or fall from a laying down or seated position and need to be monitored, although these individuals may be otherwise mostly independent. Alarm is on after the cable is put in place and lock-and load switch is closed to hold battery sensor cables in place. Device is triggered when he switch is opened and alarm sounds. Chime or Alarm alert options. Two concealed reset buttons must be simultaneously pr
Color-Coded Therapy Putty by AliMed® is designed for those recovering from a stroke or with Alzheimer's disease or dementia to help these individuals to strengthen grip, sharpen fine-motor skills, train memory, and build hand strength. Putty is color-coded by resistance. Tan is extra-extra soft. Yellow is extra soft. Red is soft. Green is medium. Blue is firm. A four-pack contains one 2 ounce container of each color. Silicone-based putty is unscented and non-toxic.
SafetySure® Mary's Aide Transfer Sling provides caregivers with a secure hold and control during patient transfers. Made of woven nylon with hook-and-loop closures and shaped like an undergarment, it is worn over the patient's clothing. During transfer, the transfer sling stays securely in place without binding or riding up. A hand grip on the back of the transfer sling can be used during ambulation as an alternative to a gait belt. Machine wash and dry or wipe clean.
The AliMed AliRail Bed Rail is designed for individuals with mobility and balance disabilities who need assistance getting in and out of the bed. Its M-shaped design allows for two-handed gripping. Provides protection without enclosing the user completely. No-slip, ergonomically shaped foam-covered grip makes holding the bed rail handle easier. Double cross brace for maximum support. Strong nylon straps wrap around box springs to provide more counter weight and extra-secure installation. Three-p
These Microscope Arm Supports are designed for people with upper extremity disabilities to use in a science class or a laboratory. The height and angle are adjustable for custom arm support and for various microscope dimensions. The supports attach with a clamp, the height adjusts 5 inches to 6 inches above workstation, and pad extends over edge of bench.
The AliMed® D2™ Night Splint is a dynamic night splint for use by individuals with lower extremity disabilities to wear at night and get pain relief from plantar fasciitis using a pivoting dorsal shell and dynamic cord to help gently stretch the plantar fascia and calf musculature. The pivoting shell and dynamic cord allows some normal plantarflexion of the foot during sleep and returns foot to a dorsiflexed position when the muscles relax. The user can adjust the splint to ensure a comfort leve
The AliMed Disposable Gait Belt is a gait belt meant for patients with balance or mobility disabilities. The belt are designed to be disposable and single use to reduce the spread of infection.
The AliMed® Bariatric Shifter is designed for lateral transfers for patients up to 600 pounds. The shifter reduces caretaker back strain by minimizing friction on transfer services. The elongated shape includes fourteen handholds to ergonomically correct position, and the extra-wide design better supports excess tissue and supports patient's head. The flexible plastic is made for uneven surfaces.
Assisting Survivors of Traumatic Brain Injury, 2d ed. (edited by Karen Hux and subtitled “The Role of Speech-Language Pathologists”) is a book written for Speech and Language Pathologists (SLPs) to prepare them for serving people with an often “hidden disability” who are indistinguishable from non-injured people. The three sections present 1) understanding TBI, including definitions, injury severity, and mechanics; 2) the role of the SLP in discussing major disorders associated with TBI, such as
The Alimed Male Pressure Relief Shoe is an Achilles Heel Protection Sleeve to provide relief for users with pump bumps Haglund deformity) or sore, fatigued or injured Achilles tendon. Soft, comfortable gel pad protects the posterior of the heel from friction while gently compressing and reducing pressure Washable and reusable Slim profile design fits in most footwear.
The DJO Unisex Pressure Relief Shoes is designed for users with arthritis and mobility disabilities. The shoe is intended to off-load ulcerated areas of the foot during the treatment of diabetic ulcers. The laminate insole is designed to help redistribute load away from ulcers.
The Single Handed Cutting Board is designed for individuals with neurological impairments, limited hand strength or mobility. The device is great for work surface to make sandwiches, slice meats and chop vegetables. The cutter includes two spikes to hold tightly onto the food that needs be slice. It is ideal for preparing a meal with ease.
The ALIMED 80347 Rocking T Knife is designed to assist people with limited hand strength or with use of only one hand in cutting or chopping food. The knife requires less strength and dexterity than other rocker knives. Large handle. Pressure is applied directly above food, using strength of whole palm.
The AliMed Hi-Sided Plate with Lip is an inner lip plate designed for use by individuals with upper extremity disabilities. The device makes scooping food onto utensils easier for the individual who has weakness or uncoordinated movements. The plate is 1 – ¾ inches thick and made of durable plastic, is scratch resistance and virtually unbreakable.
The ALIMED 8128 Plate Partitioned is a partitioned plate designed to provide ease while eating for individuals with poor coordination or perception difficulties. The plate provides extra depth and a top rim to help users with poor coordination negotiate food onto a utensil and up off the plate. Additionally, the plate has a smooth base, melamine, and is dishwasher-safe.
The Anti-Slash Gloves is a cut resistant glove designed for users with lack of strength or lack of mobility. The anti-slash gloves are made with 100% Kevlar twill to provide optimal protection from abrasion and slash injuries. Mesh back for ventilation and added comfort. Palm, index finger, and side of hand are covered with soft pearl leather fabric. Additionally, it includes a 3 inch safety cuff for added wrist protection.
The Anti-Cut and -Slash Sleeve is a cut resistant sleeve designed for users with lack of strength or lack of mobility. The device provides protection for the whole arm when handling sharp objects. The device is made with 100% Kevlar twill and a 5 inch cuff with an adjustable closure for added safety while working. Additionally, the device is elastic across the back and chest. Grommets are located on the sleeve to provide breathability and help prevent heat buildup.
The Anti-Slash Forearm Cuff is a cut resistant slash designed for users with lack of strength or lack of mobility. The slash is made with 100% Kevlar twill to protect workers from cuts, abrasions, and exposure to sparks while working. The elastic thumb loop keeps the cuff from sliding during use. Adjustable hook-and-loop closure for comfort and easy on/off.
The Anti-Slash Wrist Support is a cut resistant slash designed for users with lack of strength or lack of mobility. The slash provides abrasion protection when working with sharp objects such as metal or glass. The grain leather wrist support helps prevent over-extension or -flexion of the wrist, while impact-absorbing padding in the palm provides repetitive strain protection. The device secures with a hook and loop closure.
The Slabber's Glove is a cut resistant glove designed for users with lack of strength or lack of mobility. The globe is a detachable wrist support with hook-and-loop closure prevents repetitive strain injuries (RSI), and suede leather palm provides added protection and durability. The glove leaves half of finger free to help increase dexterity and mobility.
The Anti-Slash Shin Guard is a cut resistant shin guard designed for users with lack of strength or lack of mobility. The shin guard is made with a double layer of 100% Kevlar twill to help prevent cuts and abrasions when working with sharp materials. The guard pad provides extra protection for the delicate shin area. It is intended for use when heat is involved, or while grinding or welding. The 3 elastic straps and hook-and-loop closure make the shin guard easy to don and remove.
The AliMed SI Belt is a muscle stabilizer belt designed for users with lower extremity disabilities, back pain, or muscle and ligament tensions. The belt stabilizes muscles and ligaments of sacroilliac joint. Hook-sensitive, 2 inch with non-elastic belt with nonslip interior conforms to body contours. Elasticized closure allows non-binding comfort during activity.
The Back-A-Line Belt is a curved lumbar belt designed for individuals with lower extremity disabilities or back pain. The belt is designed to be a curved lumbar pad and is intended to improve the user’s posture at a subconscious level, which is the only way to reduce back pain or prevent future injury. Its non-stretch design eliminates the risk of muscle weakening, a concern with other back belts. Designed to combat the actual cause of back injury — poor posture rather than addressing only the s
The Polysorb® Proform Insoles are shoe inserts designed for use by users with lower extremity or walking disabilities. The insole is lightweight polyurethane foam provides heel cupping and contoured arch support. The device provides extra cushioning and shock absorption in the heel. Additionally, the ultra-thin cushion is designed to work on tight fitted shoes. Four-way stretch fabric reduces friction and heat buildup that causes blisters and calluses.
The Spenco® Heel Cushions are shoe inserts designed for use by users with lower extremity or walking disabilities. The cushions provide support for users who are looking for additional heel cushion. The cushion is made of ¼ inch thick spenco aerated comfort material.
The Spenco® Performance Gel Insoles is designed for use by users with lower extremity or walking disabilities. The insoles are thermoplastic rubber combined with energy return and heel strike impact. The top is cover with Silpure Antimicrobial and helps eliminate odor, bacteria and reduces friction. Additionally, the top cloth helps reduce blisters and calluses.
The Spenco® Polysorb® Heavy Duty Work Boot Insoles is designed for use by users with lower extremity or walking disabilities. The insole is designed with cushion in the heel strike zone and the forefoot area. This device is made of Ultra-Fresh Silpure antimicrobial fabric treatment and provides odor control.
The Trilaminate 1 Diabetic Insoles are shoe inserts designed for use by individuals with arthritis, diabetes and other lower extremity disabilities. The insoles are heat moldable footcare, providing a total contact, multiple density, prefabricated, removable inlay that can be heated and directly molded to the patient’s foot.
The Duo/Laminate D-Soles are shoe inserts designed for use by individuals with arthritis, diabetes and other lower extremity disabilities. The insoles offers total contact and maximum pressure distribution, but when used alone it continues to compress, reducing cushioning at critical heel apex and metatarsal heads. These unique insoles combine moldable Plastazote with an expanded urethane base in the optimal configuration for maximum protection that won't bottom out. Insoles feature a thick, sha
The Full-Length Cushioned Insoles are shoe inserts designed for use by individuals with arthritis, diabetes and other lower extremity disabilities. The insoles are durable and soft memory foam that molds into the users feet. Additionally, it helps increase comfort / reduces heel shock and relieves effectively the burning pains in the ball of foot and heel areas.
The Glass Composite Orthotics Insoles are shoe inserts designed for use by individuals with arthritis, diabetes and other lower extremity disabilities. The insoles are ultrathin (only 1.5 millimeters thick) and lightweight to fit comfortably and unobtrusively into your shoe. Fiber-Glass reinforced thermoplastic composite orthotics can be adjusted for better fit and functional control by warming with a heat gun or in an oven. The orthotic retains rigidity and shape after heat modification. Guaran
The CAM WALKER® II is an orthotic designed for people with a lower extremity disability to treat stable fractures and sprains. The device provides lowered rocker design and CAM adjustability ranging from neutral to 45° plantar/dorsiflexion with the turn of a screw. The unique cam walker ankle joint allows easy access adjustment and aluminum uprights for further customization. Fix the ankle or prescribe a range of motion.
The AIR CAM® Adjustable Walker Boot is an orthotic designed for people with a lower extremity disability to treat stable fractures and sprains. The device has a lowered rocker design and CAM adjustability ranging from neutral to 45° plantar/dorsiflexion with the turn of a screw. Unique ankle joint allows easy access adjustment and aluminum uprights for further customization. Fix the ankle or prescribe a range of motion. Also has a pneumatic liner for a more natural gait with increased support an
The Aircast® Pediatric Walking Braces (Foam and Pneumatic) is an orthotic designed for people with a lower extremity disability to treat stable fractures and sprains. The device is a cost-effective walking brace with full-shell protection and semi-pneumatic support. Two air cells housed within the shell compress and support the malleoli. Each aircell custom inflates with the included hand bulb, providing optimum support and comfort.
The RCAI® Pediatric TA Boot is an orthotic designed for people with a lower extremity disability to treat stable fractures and sprains. The boot provides secondary immobilization and rehabilitation for the foot and ankle. Indicated for mid shaft to distal tibial fractures, Achilles tears, ankle fractures, and ligament damage. This lightweight, (2 pounds.) low profile walker boot has a heel with rocker bottom that enhances natural gait and hip alignment. Available with static or adjustable ROM Hi
The AliMed® Aerocell™ II High Cell Cushion, Single- or Dual-Valve is a gel flotation seat cushion designed for use in wheelchairs. The cushion is a low-cost solution to helping protect patients from developing pressure injuries. Air cells provide flotation and exceptional pressure redistribution. The 4 inch High Cell model offers maximum flotation, and is recommended for patients at high risk for skin injury. Single-Valve inflates in one step. Dual-Valve permits each side of the cushion to be in
The AliMed® Stay-Put™ AeroCell Cushion is a gel flotation seat cushion designed for use in wheelchairs. The cushion attaches to the wheelchair and remains in the chair when folded. Caretakers never have to worry about losing or misplacing a cushion again. The cushion is hinged in the center and is securely fastened under the sling seat using plastic snap clips. When the wheelchair is folded the cushion stays on the wheelchair.
The AliMed® Wheelchair Cushion Covers, High Cell is a gel flotation seat cushion designed for use in wheelchairs. The premium wheelchair cushion covers - cover high cell cushions. Additionally, the cushions are flame, urine resistant and washable.
The Chair-Air® 9700CAF Cushion Covers, High Cell is a gel flotation seat cushion designed for use in wheelchairs. This alternating air wheelchair cushion and pump system consists of four individual bladders that alternate to provide the patient a superior pressure-redistribution seating surface. The zipped nonskid, stretch-knit cover contains an antimicrobial and is fire retardant. This system includes: 9701 Alternating Pump and Cushion.
The Disposable Lens Cleaning Station is designed for use by individuals with low vision. The lenses are economy, convenience and efficiency, this self-contained, disposable station combines cleaning solution and lens tissues. Fabricated of coated paperboard, the 14 x 21 x 21centimeters high (5 - 1/8 x 8 - 1/4 x 8 - ¼ inches) station has openings for wall mounting. The station contains a generous supply of 600 lens tissues, 13 x 20 centimeters (5 x 8 inches) and a 237-milimeters (8 ounces) polyet
The PDI® See Clear® Eyeglass Cleaning Wipes are wipes designed for use by individuals with low vision. The wipes safely clean the eye protection gear and glasses. It is intendent for glass and polycarbonate lenses. The Antistatic/antifog formula dries quickly and does not scratch. Packaged in a convenient dispenser box.
The Rayon Cloth Tissues are wipes designed for use by individuals with low vision. The vision cloths are intended for use on glass and plastic lenses, these tissues do not contain silicone. 150 sheets in a pop-up dispenser pack.
The Safety Goggles is designed for individuals with low vision. The googles are molded of soft, clear, flexible vinyl that conforms to the face and nose; these goggles have four vents to reduce fogging. Four vents help reduce fogging for effective eye protection. With clear acetate lenses, the goggles can be worn over regular eye-glasses with complete comfort.
The AliMed N95 Flat Fold Face Masks is designed for users with respiratory disabilities or want to be protected against particulate materials that cause infection. The face mask helps both patient and healthcare worker be protected against transfer of microorganisms, body fluids, and particulate materials that cause infection. Made of soft, cool material for increased comfort.
The Alpha Pro Tech Critical Cover® PFL® N-95 Particulate Respirator is designed for users with respiratory disabilities. The device delivers the appropriate amount of filtration efficiency and when combined with a trio of patented and unique design features, also delivers the user a comfortable, fluid-resistant, custom fitting facemask. The integrated Magic Arch® technology creates a breathing chamber within the facemask by holding it away from the wearer’s nose and mouth. The PFL technology, in
The Alpha ProTech Critical Cover® Combo® Facemask w/Shield is designed for users with respiratory disabilities. The face mask is hypoallergenic and fluid-resistant with an optically clear shield. Face shield attaches to the mask with snaps for easy removal where applicable. Shield is 7 millimeters thick with an anti-fog coating, low glare, and is distortion-free. Lightweight. Tie-Back or Ear-Loop styles.
The Procedure Masks is designed for users with respiratory disabilities. The face mask is designed to be a soft knit ear loops, fluid resistant and outstanding particle filtration. The full-length aluminum nosepiece helps provide a perfect fit every time and the sonic welded design ensures maximum protection for the user.
The AliMed® Shoe Aid is designed for use by individuals with arthritis, lower extremity or mobility disabilities. This device fits on the users hand and slips over the counter of the shoe, reinforcing it and making it act like a shoehorn. Put the shoe on the floor and maneuver it with the string and insert the foot. A gentle upward tug releases the aid. Pack of 2.
The Dress EZ™ is a shoe horn stick designed for use by individuals with arthritis, lower extremity or mobility disabilities. The device is a two function aid; it can be used as a dressing aid or shoe horn. The Dress EZ is made of soft foam handle with a 1 inch diameter and has a smooth surface with round edges.
The Ezy-On Wire Stocking Aid is designed for use by individuals with arthritis or lower extremity or mobility disabilities. This versatile stocking aid helps with applying stockings and compression hose simply and evenly, and is great for putting on socks too. For use by patients and caregivers.
The Ezy™ Sock Helper Aid is designed for use by individuals with arthritis or lower extremity or mobility disabilities. The device assists user with putting on socks and hose. It is sturdy steel with smooth plastic coating. Sock is stretched over metal column, and then the foot is slipped into sock using the handles to position foot correctly.
The AliMed® Bariatric Bed Pan w/Anti-Splash is designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The bed pan accommodates all patients, including bariatric and obstetric patients with comfort and ease. Unlike standard bed pans, AliMed's Bariatric Bed Pan has a low profile, large flat supportive area to accommodate larger patients, and is easy to place and remove. Made of a high impact polyethylene, it supports up to 1,200 pounds and easily holds
The AliMed® Comfortable Bed Pan is designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This bed pan fits patients of all sizes from child to adult. The low profile makes it easy to get on and off and has a comfortable wide, flat seating area that forms an anti-splash lip. Strong, durable, reusable, and serves a wide variety of patient needs.
The Anti-Splash Baffle Urinal is designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This urinal has an innovative built-in baffle that prevents accidental spills and costly clean up. Between uses, the urinal can stand on one end or be easily hung from a bed rail. Large ergonomic handle is easy to grasp. Attached lid won’t get lost and has space for the patient’s information. Holds up to 32 ounces of liquid, with graduated markings to measure outp
The Carex® Urinals is designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The device is designed to help prevent spills. Features a sturdy grip for easy handling and it can be used in several positions. This urinal is lightweight, durable and easy to clean. Features graduation marks to measure output.
The AliGel™ Chest Positioner is designed for use by individuals with arthritis, lower extremity and upper extremity disabilities. The chest positioner is design to uniformly conform to a patient’s shoulder-to-chest area. Has rounded edges for the axilla. Provide optimum upper body positioning while alleviating pressure on the thorax area.
The AliGel™ Chest and Axillary Roll Covers is designed for use by individuals with arthritis, lower extremity and upper extremity disabilities. The chest positioner is design for wrapping around open rolls and to be used as a stand-alone positioner. Larger size for chest roll, smaller for axillary. Both come with hook-and-loop attachment.
The AliGel™ Contoured Chest Rolls is designed for use by individuals with arthritis, lower extremity and upper extremity disabilities. The chest rolls contoured conform to an adult's rib cage in prone position. Flat bottom provides stability and keeps positioner in place. Available in three different sizes.
The AliGel™ Contoured Head/Leg Rests is designed for use by individuals with arthritis, lower extremity and upper extremity disabilities. The device helps stabilize the users head while providing easy access to face and top of cranium. Also use to position and protect knee or calf from pressure.
The AliMed® Elbow Immobilizers is an elbow splint designed for use with individuals with upper extremity disabilities. The device is a restraint alternative to help prevent patients from accessing tubes or IV’s. The immobilizer can also be used to maintain elbow joint in extension post-injury or post-operatively. Rigid stay is fully enclosed and incorporates a flexible edge at biceps and forearm for greater comfort. Non-slip interior helps reduce brace migration and features skin-safe fabric at
The AliMed® Shoulder Immobilizer is a shoulder splint designed for use with individuals with upper extremity disabilities. The contoured abduction pillow and foam-padded sling are designed for postsurgical shoulder repair, shoulder dislocations, humeral fractures, and other arm/shoulder injuries. Positions shoulder in approximately 30° of abduction. Waist strap and removable, padded neck strap ensure secure immobilization. Exercise ball included for muscle and circulatory stimulation. Fits left
The Joslin ER Sling™ is a shoulder splint designed for use with individuals with upper extremity disabilities. The shoulder splint is a disposable sling that stretches to fit a wide variety of sizes and is perfect for the fast paced surgery center or emergency room. Additional eyelets have been added in the back strap for a perfect fit and a new smooth stretch fabric gives the patient a comfortable sling and a sleek look. In addition, the size of the 12 pack has been reduced 30% to save shelf an
The Universal Knee Immobilizer is a knee splint designed for use with individuals with lower extremity disabilities. The device comfortably fits most legs with adjustable stays and straps. The movable stay/strap assembly facilitates correct medial and lateral positioning. The device is 3/8 inches thick laminated foam with alternating hook-and-loop closures. Dual aluminum stays on the lateral and medial stay/strap assemblies. Three anatomically formed posterior stays. An elastic strap adds suppor
The Heel-So-Smooth Vented® Heel Sleeves is designed for use by individuals with lower extremity disabilities. The sleeve is designed to be moisturized and rejuvenate dry, chafed, cracked, fissured, or damaged skin. The soft-stretch fabric easily slides on to cover heel. Inside coating of gel with mineral oil soothes entire heel area.
The Heelbo® Heel and Elbow Standard and Premium Protector are designed for use by individuals with lower extremity disabilities. The sleeves are designed to treat and help prevent dermal ulcers on heels, elbows, and knees. Allows skin to breath and does not restrict blood flow while staying in place. Standard model features double-layer of foam padding to minimize pressure, Premium model uses a viscoelastic gel pad to reduce shear while promoting healthy skin.
The Gel Ultimates™ Moisturizing Booties are designed for use by individuals with lower extremity disabilities. The booties are designed to moisturize and soften feet, including heels and toes. Proprietary gel lining includes jojoba oil, olive oil and other nourishing oils. Pleasant green tea and willow scent.
The AliMed® Heel and Elbow Protectors are designed for use by individuals with lower extremity disabilities. The device offers padding and pressure relief for the elbow, heel, or knee without trapping heat. Comfort cuffs hold protectors securely in place without compromising circulation. All-day comfort ensures greater compliance.
The Ventopedic™ Heel Protector is designed for use by individuals at risk for or with pressure sores. The heel protector is made with a three-layer laminate with soft hydrophilic fabric top and bottom, readily wicks away moisture, and cushions and promotes air circulation to help avoid skin maceration. Adjustable straps position foot and ankle securely in the protector.
The Ventopedic™ Heel and Ankle Protector is designed for use by individuals at risk for or with pressure sores. This ankle protector is soft, adjustable straps position the foot and ankle securely, leaving the toes and heel exposed. Extra layers of Vento fabric under the calf allow heel to be suspended and protected. Not made with natural rubber latex.
The Ventopedic™ Heel and Ankle Offloading Boot is designed for use by individuals at risk for or with pressure sores. The ankle protector is made of ventopedic fabric contains controlled levels of hydrophobic and hydrophilic fibers that attract and expel skin moisture four times faster than regular fabric, keeping skin drier, eliminating odors and lessening the chance of skin breakdown. The fabric actually draws moisture away from the skin and allows it to escape. Clinical test results confirm t
The Ventopedic™ Heel Elevation Boot with Foot-drop Strap is designed for use by individuals at risk for or with pressure sores. The Foot-drop Strap suspends the heel and cushions the calf. Open heel allows airflow to promote healing and visual inspection. Adjustable foot-drop strap aids in positioning.