• Human-Translated Fact Sheets and Video
  • Large Print

all-one-mobility-inc

Results: 14

Bruno Big Lifter (Model Vsl-570)

The Bruno Big Lifter, model VSL 570, is a wheelchair and scooter loader designed for use at the rear of minivans, sport utility vehicles, and full size vans. The Big Lifter's manual swing has a low-resistance design, requiring minimum strength. Installation requires no structural modification. The adjustable low-profile arm allows the placement of larger power bases into smaller vehicle openings. A Bruno Custom Base provides for mounting the lift in the appropriate location. POWER: Big Lifter is

Bruno Offset Space-Saver (Model Asl-350)

The Offset Space-Saver, model ASL-350, is a trunk-mounted scooter loader designed to load a partially assembled three-wheel scooter in the trunk of a car. The offset design of the lift arm allows the user to position the scooter inside narrow trunk openings. All controls are located on top of the lift arm. The unit disassembles with three steps and can be stored in the vehicle or in the trunk. When an additional tower base assembly is ordered, the loader can be used in more than one vehicle. CAP

Bruno Electra-Ride Ii (Model Sre-1550)

The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at

Universal Scooter Lift (Model Al100)

The Universal Scooter Lift, model AL100, is a hitch-mounted scooter carrier designed for use by individuals with mobility disaabilities. This outside scooter lift works with any Class II hitch-equipped vehicle with a hitch from 5 to 19 inches high, and can support a scooter with a maximum width of 28.5 inches and a maximum wheelbase of 42 inches measured from the hub (center) of the front tire to the hub of the rear tire. The deck automatically folds up, out of the way, when empty. OPTIONS: A Sw

Automatic Power Chair Lift (Model Al550)

The Automatic Power Chair Lift, model AL550, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift's docking station features a self-aligning base, enabling the user to drive onto the platform and be locked in place. An audible latching sound is heard as the chair's pin passes into the locking mechanism, and attempting to back the chair verifies that the latch is locked. The docking base also includes a bright colored indicator pin to c

Universal Inside Lift (Model Al200)

The Universal Inside Lift, model AL200, is a wheelchair or scooter van loader designed for use by individuals with mobility disabilities or spinal cord injury. This is a heavy-duty lifter for heavier scooters and wheelchairs. It has an adjustable base that fits most vehicles on either side, and it disassembles into three components for stowage. It has a boom range of 360 degrees. POWER: Powered by the supplied electrical harness. The harness has full-length leads that attach directly to the bat

Liberator Plus Trunk Lift (Model Flc-2000-Hdab)

The Liberator Plus Trunk Lift, model FLC-2000-HDAB, is a trunk mounted scooter or power wheelchair loader designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This heavy duty lift is constructed of welded steel with a powder coated finish, and comes with an adjustable reinforced deck base that bolts to the trunk or cargo area floor in a car, van, or SUV. It has a motorized lifting strap with a manual boom swing and hand held push button controls, a

Ultra Twin Freespan

The Ultra Twin Freespan Traverse is a powered overhead bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This freestanding rail system is specially designed to lift heavy patients in combination with the Likorall or Multirall (see separate entries)lift motor. This unit is adjustable to four different heights, and is available in eight different rail lengths. Equipped with locking han

Vmi Full Size Van Conversions

The VMI Full-size Van Conversion is a van conversion designed for use by individuals who use wheelchairs. Features include lowered floor with an additional driver position drop which enables the vehicle to be driven from wheelchair or allows wheelchair to be located in front passenger position, added head room in the driver's position, driver and front passenger recessed seat belt retractors for more room to maneuver adaptive equipment in and out of front driver and passenger positions, raised r

Elite G2

The Elite G2 is a scooter or wheelchair loader for a van designed for use by individuals with mobility disabilities. This loader features a keychain remote control, a drive on/drive off platform, and quick cycling efficiency. DIMENSIONS: The platform is 44 x 27.5 inches. Stowed, the lift is 50 x 44 x 29.5 inches. CAPACITY: 350 pounds. WEIGHT: 200 pounds. COLOR: Available in five colors.

Pt Driver & Pt Rider

The PT Driver or PT Rider is a minivan with ramp designed for use by individuals with mobility disabilities or spinal cord injury. This is a converted PT Cruiser with a lowered floor, a side-entry ramp, and click-in driver or passenger seats. The van comes with four-point wheelchair restraints and carpeting; commercial-grade non-slip flooring is available. DIMENSIONS (HxLxW): Interior is 56 x 48 x 29.5 inches. The ramp is (LxW) is 32.5 x 44 inches. The door opening height is 50 inches.

Excel & Excel Compact

The Excel & Excel Compact are wheelchair or scooter loaders vans designed for use by individuals with mobility disabilities. This boom lift features a wireless keychain remote control. DIMENSIONS: The vertical reach is 35.5 inches and the boom length is 38.25 inches on both models. The total height for the Excel is 39.25 inches and 31.75 inches for the Excel Compact. CAPACITY: 350 ponds on both models. WEIGHT: The installed weight for the Excel is 66 pounds and 64 ponds for the Excel Compact

Excel E & Excel E Compact

The Excel E & Excel E Compact are wheelchair or scooter loaders vans designed for use by individuals with mobility disabilities. This manual swing boom lift features push-button controls and adjustable locking "stops." DIMENSIONS: The vertical reach is 35.5 inches and the boom length is 38.25 inches on both models. The total height for the Excel is 39.25 inches and 31.75 inches for the Excel Compact. CAPACITY: 350 ponds on both models. WEIGHT: The installed weight for the Excel is 54 pounds

Excel 200

The Excel 200 is a scooter or wheelchair loader designed for use by individuals with mobility disabilities. With five adjustments available to the dealer, this lift fits in most SUVs, minivans, station wagons, and the PT Cruiser and accommodates most scooters and lightweight powered wheelchairs. This lift offers both rear and curbside loading and the dual positioning base makes installationpossible on either the passenger or the driver's side of the rear cargo area. The Excel 200 lifts the po

 
Processing...


Driving Walking/Biking Public Transit  Get Directions