• Human-Translated Fact Sheets and Video
  • Large Print

all-time-medical

Results: 18

Z26

The Z26 is a lighweight wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Aluminum alloy and carbon steel frame with a powder-coated, liquid crystal (K5) iridescent blue finish. Additional features include adjustable tension back supports and anti-tippers. SEAT: 16 or 18 inches wide. CUSHION: 2-inch nylon-covered foam seat cushion. UPHOLSTERY: Heavy-gauge flame-retardant nylon upholstery. The back upholstery is remo

Swing Away Stump Support

The Swing Away Stump Support is an amputee leg support designed for use with wheelchairs. The device has a metal frame and a vinyl covered cushioned leg support for below knee amputees. Available for the right or left leg, the support adjusts horizontally and vertically. Models are available to fit a variety of chairs, including Everest & Jennings, Invacare, and Breezy.

Image Mid Wheel Drive Wheelchair

The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-

Rotational Seating System

Seating system rotates in space to 45 degrees, maintaining seated position. For Everest & Jennings and Invacare sectional back, recliner, and powerbase (Lancer, XT). Rotating frame, rigid seat, rigid back, standard headrest, complete armrest and legrest assemblies, arm and leg troughs, underseat module mount standard. Toggle switch control. Legs elevate manually. Back heights up to 25 inches in one inch increments. Underseat 24 volt DC actuator, and bearings on all moving parts. Options: sem

Zero Shear Power Recliner

Zero shear power recliner for Invacare Arrow recliner frame and sectional back chairs, or Everest & Jennings recliner frames 47 or 49, and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Reclining frame, sliding back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat module mount standard. Toggle switch control. Back height 19 to 25 inches in one inch increments. Underseat 24 volt DC act

New And Rebuilt Electric Motors

Electric motors, new and rebuilt, for Everest and Jennings and Invacare wheelchairs and three wheel scooters. New motors are manufacturers' original equipment with a one year factory warranty. We offer a 90 day warranty on rebuilt motors. Quantity discounts are available. Orders and repairs are handled at the factory and delivered by UPS. New motors available for E & J 3P,3W Marathon, 3V, Sprint, and 33B only. Motors rebuilt for the following: Invacare, Amigo, Pace Saver, A-Bec, Lark, Dart,

Shear-Controlling Power Recline Systems

Shear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard features include a solid contoured back with high-density foam and a Cordura

Dual Tilt In Space With Shear-Controlling Power Recline Systems

Dual Tilt in SpaceShear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt and 57 degrees of tilt or any combination in between. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard featu

Tilt In Space Systems

Tilt In Space Systems are powered tilt in space systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers up to 57 degrees of tilt. Standard features include a solid contoured back with high-density foam and a Cordura-Lycra cover, full-length muti-mount back rails, a flat solid seat pan for ease in cushion installation or change, a Rock-n-Lock Akton Gel headrest with a Cordura-Lycra cover, hardware

Winnie Walker Mimi Lite Aluminum Rollator (Models 510, 515, & 518)

The Winnie Walker Mimi Lite Aluminum Rollator is a six-wheeled rollator designed for use by individuals with walking or balance disabilities. This folding walker features dual rear wheels, push-down brakes, and adjustable-height handles with ergonomic grips. Standard equipment includes a padded seat; a padded backrest; and a carrying pouch. OPTIONS: Basket. DIMENSIONS (WxDxH): The seat is 14 x 13 x 22 inches. The frame is 24 inches wide x 27 inches long. The handle height adjusts from 32 to 39

Invacare A-6S / F-6S

The Invacare A-6S/F-6S is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors with dual rear and front customizable suspension. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A-6S has an adjustable seat angle and the F-6S has a fixed seat angle. The seat widths are available from 12 to 20 inches

Low Shear Power Recliner

Low shear power recliner for Invacare Arrow recliner frame or sectional frame, or Everest and Jennings recliner frame -47 or -49 and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Comes assembled, includes reclining frame, rigid back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat or back module mount, and a toggle switch to control the system. Back height of 16 inches to 25 inches in on

Power Base Recliner Seating System

Power recliner designed for Everest and Jennings Lancer, Fortress 655 FS, Invacare XT powered wheelchairs, Quickie P-300, and Permobile Max90 & Super 90. Assembled; systems include reclining frame, rigid seat, rigid or sliding back, complete armrest and legrest assemblies, arm and leg troughs, standard headrest, toggle switch to control recline, and mounting interface to wheelchair. Rigid back 16 inches to 25 inches, sliding back 19 inches to 25 inches in one inch increments. Underseat 24 Vo

Invacare Comfort-Mate Extra Cushion And Base

The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo

Ventilator Trays (Models 08-Pe, 08-Pi, 08-Pj, & 08-M)

Adjustable ventilator or respirator support tray mounts under the wheelchair seat between the rear tires. Model 08-P is a pull out model for power recliners, has 16 inches of travel; battery box holds batteries for wheelchair and back up battery for ventilator; available for Everest & Jennings or Invacare power recliners with LaBac Systems seating systems. Model 08-M is a lift out model for manual wheelchairs; rests on lower rail of chair, is 13 inches wide and 23 inches long with a one inch

Tash Sip 'n' Puff Adaptor (Model 32676), 1555 Adaptor (Model 32677), Joystick Adaptor (Model 32678), Mk2 Adaptor (Model 32679), & Adaptor Clamp Bushing (Model 32687)

Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick

Rickie Walker (Model 400)

The Rickie Walker, Model 400, is a folding adjustable wheeled walker and tri- wheeled walker designed for use by people with mobility disabilities. This walker features pushdown positive brakes, positive stopping, 8-inch pneumatic tires on all wheels, bearings in all wheels and the front fork, and custom contoured handgrips. The walker has a 360-degree turning radius. OPTIONS: A carrying basket and tote are available. DIMENSIONS (L x W): 23 x 29 inches; height is adjustable from 31 to 41 inches.

Nova Air Flotation System.

Alternating air pressure flotation mattress surface for prevention of decubitus ulcers. Features air flow to provide skin ventilation; box fitted end panels for attachment to hospital mattress; feature for uninterrupted air flow while patient is in any position; sleeved air hoses with positive locking system; concentric arc design for massaging action. Alternate sets of cells inflate and deflate twice each minute. Consists of power unit (14 by 11 by 9 inches) and Nova mattress (38 by 84 inches).

 
Processing...


Driving Walking/Biking Public Transit  Get Directions