consumer-care-products-llc-formerly-consumer-care-products-inc
Results: 36
Prone Support Walkers (Models 3A To 3E)
The Prone Support Walkers, models 3A through 3E, are ergonomically designed prone standers and walkers for children and adults. These mobility orthoses are made of institutional grade materials including a sturdy frame with steel legs, an oak tie bar, 4 indoor outdoor enclosed urethane casters, and a Plastazote cushioned upper trunk support. The saddle and chest support adjust to angles from 90 to 45 degrees and are designed to encourage various amounts of independent upright weight bearing acro
Hand / Wrist Straps (Model 6.5)
The Hand/Wrist Straps 6.5 are accessories for child tricycles by Consumer Care Products Inc. (See separate entries.) These fully adjustable leather straps with hook and loop fasteners are designed to position and support the child's wrists to keep the hands near to the handlebars. DIMENSIONS: 13 inches long. WEIGHT: Approximately 1 pound.
Prone Support Walker - Toddler
The Prone Support Walker - Toddler is a prone stander and walker for children with 9.5 to 14 inch crotch height, 6 inch chest width or 20.5 inch chest circumference. Frame has steel legs, cushioned handlebars, machine washable nylon slip covers, and 4 8-inch indoor-outdoor casters. It promotes walking by stabilization of proximal joints, bilateral control of extremities, maintenance of hip abduction and dynamic weight bearing on arms and legs. It includes two positioning belts. The handlebar, ch
Ring Support Walker (Models 19A & 19B)
The Ring Support Walker, models 19A and 19B, is a child adjustable walkers ergonomically designed for use by children with mild to moderate central nervous system involvement. Features include a 0 to 20 degree tilt-in-space ring adjustment for the elimination of toeing, improvement of dynamic balance and development of walking patterns; a wide, H-shaped base; locking swivel casters; Naugahyde covered upholstered seat; built-in height adjustment; hip control positioning belt; and low back support
Functional Forms Incline Wedge (Models 103Ad, 103Ac, 103Ab, 103Aa, 103A, 103B, 103C & 103D)
The Functional Forms Incline Wedge is a positioning wedge designed to provide support to individuals lying in an elevated supine resting position or an elevated prone position to allow for a more active, elevated head position while bearing weight on the forearms. The wedge features a 15-degree incline to help support the user, and it has four adjustable straps to assist in maintaining the trunk in a straight and aligned position (also available without straps). Therapeutic benefits of the wedge
Drop Off Wedge (Model 102)
The Drop Off Wedge, model 102, is a positioning wedge designed to provide support to individuals in the "all fours" position. The wedge is made of fire retardant foam and upholstery. Two straps on the top and one strap on the shorter vertical side (H1) help to maintain the user's position. DIMENSIONS: Four standard sizes are available, but manufacturer will also do custom designs. Standard sizes (H1xH2xWxL) are 9 x 12 x 30 x 8 inches (no. 102AA, $266), 12 x 15 x 30 x 11 inches (no. 102A, $282),
Functional Forms Sidelyer (Models 107A To 107D)
The Functional Forms Sidelyer is a side lying positioner designed to maintain persons with physical disabilities to maintain a comfortable sidelying position. It can also be used for relaxation or as a foundation for other school, work, and play activities. Therapeutic benefits of the sidelying position may include decreased abnormal reflex movements, improved alignment of the spine and internal organs, and improved breathing and digestion. The board is made of wood with fire retardant foam and
Functional Forms Nighttime Sidelyer Board (Models 110A & 110B)
The Functional Forms Nighttime Sidelyer Board, models 110A and 110B, is a side lying positioner designed to attach to the secured siderails of a bed to help persons with physical disabilities to maintain a comfortable position. It can also be used for relaxation or as a foundation for other school, work, and play activities. Therapeutic benefits of sidelying may include decreased abnormal reflex movements and improved alignment of the spine and internal organs. The board is made with wood, with
Wing Self-Storing Wheelchair Tray
The Wing Self-Storing Wheelchair Tray is a swing-away lapboard for manual and powered wheelchairs and 3-wheeled scooters. The patented, tablet-size tray is made of clear polycarbonate plastic, and has a pencil/spill trough plus a rim along the outer edge and a slide control. When the tray is in the stored position, the user has unobstructed access to the wheels of the chair. An adjustable, 3-directional hinge and a telescoping arm permit the tray to flip up or down and slide back and forth. Moun
Upper Trunk Support (Model 6.1)
The Upper Trunk Support (UTS) model 6.1 is a tricycle back support accessory with mounting bracket and positioning belt designed for use with trikes models 6A.1 to 6A.3 and 6B.1 to 6B.3, also by Consumer Care Products Inc. (See separate entry.) The support is made of an aluminum column with a Plastazote cushioned back pad. DIMENSIONS: 2 x 30 inches. WEIGHT: Approximately 2 pounds.
Standing Frame Conversion Kits (Models 1.7 & 1.7A)
The Standing Frame Conversion Kits, models 1.7 and 1.7A, change the 1A model standing frame to the 1B model and the 1AT model into the 1BT model, respectively. (See separate entries for these standing frame models.) This enables the 1 to 5 year old versions to fit 4 to 7 year old children. Both kits include two 19-inch aluminum uprights, two 21-inch wooden supports, and a longer hip belt. WEIGHTS: Model 1.7 weighs approximately 5 pounds, Model 1.7A approximately 10 pounds. DELIVERY TIME: This is
Universal Upper Trunk Support (Models 6C.1 & 6C.2)
The Universal Upper Trunk Support, models 6C.1 and 6C.2, are tricycle back support accessories for children with poor upper trunk balance designed to fit most child tricycles including those with vertical and horizontal frames. Features include a height adjustable Plastazote covered back pad with fabric chest positioning belt, and a mounting bracket. The mounting bracket will fit 3/4 to 1.5-inch round or square tricycle frames. DIMENSIONS: Model 6C.1 has an 18-inch upright; Model 6C.2 has a 24-i
Plastic Wheelchair Tray (Model 11A)
The Plastic Wheelchair Tray 11A is a clear acrylic lapboard that attaches to wheelchair arms with hook and loop straps that adjust with D-rings. The tray is rimless and has a radiused and polished edge. The tray has a 4-inch deep stomach cutout. DIMENSIONS: 17 x 24 x 1/4 inches; straps are 2 inches wide. WEIGHT: Approximately 5 pounds.
Poly-Carbonate Wheelchair Tray (Models 11B.1 To 11B.4)
The Poly-Carbonate Wheelchair Tray, models 11B.1 to 11B.4, is a clear plastic lapboard with straps and D-rings for adjsutment, a 4-inch deep stomach cutout, and a 5/8-inch high styrene plastic rim. DIMENSIONS: Model 11B.1 is 16 x 20 x 1/4 inches; Model 11B.2 is 19 x 24 x 1/4 inches; Model 11B.3 is 24 x 24 x 1/4 inches; and Model 11B.4 is 24 x 24 x 1/4 inches with an 8-inch deep stomach cutout. WEIGHT: Models 11B.1 and 11B.2 are approximately 6 pounds; Models 11B.3 and 11B.4 are 8 pounds.
Clear Non-Glare Acrylic Overlay (Models 11D.3A & 11D.3B)
The Clear Non-Glare Acrylic Overlays are designed for wheelchair trays by Consumer Care Products (model numbers starting with 11D, see separate entries). These overlays may be used for tracing activities and protecting communication aids and other accessories. The overlay snaps in and out. DIMENSIONS: Model 11D.3A is 16 x 20 inches; model 11D.3B is 19 x 24 inches. WEIGHT: Approximately 4 pounds.
Natural Birchwood Overlay (Models 11D.4A To 11D.4C)
The Natural Birchwood Overlay, models 11D.4A to 11D.4C is designed for use with wheelchair trays by Consumer Care Products Inc (models 11D; see separate entries). These overlays have a clear lacquer finish, and snap in and out of the trays. The overlays are designed to allow the user to benefit from the clear surface of the tray when moving, and from the opaque surface of the Birchwood insert when working on the tray. DIMENSIONS: Model 11D.4A fits trays 16 x 20 x 1/4 inches; Model 11D.4B fits tr
Oversize Deluxe Poly-Carbonate Wheelchair Tray (Model 11E)
The Oversize Deluxe Poly-Carbonate Wheelchair Tray 11E is a lapboard for use by wheelchair users. The tray includes a universal mounting system, continuous 5/8 inch high lip/retaining edge, captive locking-knobs, and telescoping support arms for strength. The rim is fused into the plastic tray for added strength without added weight. DIMENSIONS: 24 x 24 x 1/4 with a stomach cutout 14 inches wide and 8.5-inch deep. WEIGHT: 12 pounds.
Poly-Lock Plastic Tape Fastener
Poly-Lock is an alternative to fabric-type hook and loop tape fastening systems. It is made of tough, flexible polyolefin plastic with a self-interlocking mushroom-head pattern that will lock together in any position. The adhesive backed material comes with a super strenth 3M-brand rubber based adhesive and polyethylene protective sheet. This fastening tape can be used indoors or outdoors, is shock and vibration resistant, accommodates misalignment, holds underwater, is non-corrosive, adjustable
Individual Knit Loop Belt (Models 12.1A To 12.1D)
The Individual Knit Loop Belts, models 12.1A to 12.1D, are positioning belts, gait belts, or belt restraints with T-Lock tape fastners. SIZES: Small (12.1A, $18), Medium (12.1B, $19), Large (12.1C, $20), and Extra Large (12.1D, $21).
Positioning Belts (Models 12A.1 To 12A.4)
The Positioning Belts, models 12A.1 to 12A.4, are pre-assembled 3- belts that consist of two belt ends with rectangular cinch rings, the fabric belt itself, and two T-Lock tape fasteners. SIZES: Small (12A.1, $37), Medium (12A.2, $40), Large (12A.3, $45), and Extra Large (12A.4, $51). DIMENSIONS: Belts ends are 6 x 2 inches; central belt is 2 inches wide; lengths are 25, 34, 48, and 66 inches respective of sizes listed. COLOR: Beige.
Rug Rat Scooter Board
The Rug Rat Scooter Board is designed to promote neuromuscular development of the muscles in the hand, arm, and neck/shoulder in a prone position for individuals with mobility disabilities. For safety, the swivel casters are inaccessible to the fingers and hands because they are inside the scooter's shell. Other features include a plastic edge protector around the base; a closed-cell foam cushion; and two adjustable, removable nylon positioning belts for chest and thighs. DIMENSIONS (LxHxW): Sma
Standing Aid Frame With Table (Models 1At, 1Bt, & 1Ct)
The Standing Aid Frame with Table, models 1AT, 1BT, and 1CT, is an ergomonically designed, institutional quality standing table designed to facilitate standing, including weight bearing, correct foot and hip placement, and to control hip, knee, and ankle contractures and stimulate better respiration and cardiovascular functioning. The standing frame is made of aluminum and hardwood, and has built-in numerical adjustment scales for fitting, an adjustable heel stop, knee blocks, and a buttock pad
Mobility Aid Cycle (Models 6A.1, 6A.2, & 6A.3)
Mobility Aid Cycles 6A.1, 6A.2, and 6A.3 are child foot driven tricycles that are customizable/adaptable to various levels of dysfunction. Features include a 1-piece seat with low back support, abduction wedge, vertical handlebars, 45-degree hip control belt, rubber tires, and an extra wide steel frame. Leg cuffs are optional. SIZES: Model 6A.1 fits leg length (heel bottom to hip joint) 11 to 17 inches; Model 6A.2 fits leg lengths 16 to 22 inches; and Model 6A.3 fits leg lengths 21 to 27 inches.
Hand Driven Mobility Aid Cycle (Models 6B.1, 6B.2, 6B.3, & 6B.4)
The Hand Driven Mobility Aid Cycle (models 6B.1, 6B.2, 6B.3, AND 6B.4) are hand propelled children's tricycles. These tricycles are customizable/adaptable to various levels of dysfunction. Features include a 1-piece seat that provides low back support, abduction wedge, verticle handlebars, 45-degree hip control belt, rubber tires, and an extra wide steel frame with a 19-inch wide rear wheel base for stability. Leg cuffs, foot positioning harnesses, and hand and wrist accessories are available op
Hand Positioning Cones 7A Series
The Hand Positioning Cones (HPC) models 7A.1 to 7A.4 are hand cones and visual body orientation aids designed for use by individuals with perceptual motor problems to improve head and trunk alignment and balance, prevent or counter abnormal wrist and arm rotation and erratic movement. The cones are made of cushioned wood with stud and includes a washable cover, Snap On-Off Surface Anchor with insert, and a Poly-Lock Mounting Pad with adhesive Backing. Models 7A.3 and 7A.4 are horizontally mounte
Slant Board (Child Model 8A & Adult Model 8B)
The Slant Board, model 8A and model 8B, are adjustable book holders and writing boards designed for use by individuals with upper extremity disabilities. These adjustable boards are made of oak wood with non-glare surfaces. They feature easy- to- clean plastic covers to hold down paper and other material, and rims with pencil edges. OPTIONS: Attachment arms, mirror, vertical and horizontal positioning cones, hand/wrist strap, and knob and washer set (sold separately).DIMENSIONS (DxW): Model 8A
Wheelchair Heel Loops (Models 10A & 10B)
Wheelchair Heel Loops (models 10A and 10B) are designed to facilitate foot positioning and to prevent the feet from slipping off the foot rests. The devices are easy to clean and stain resistant. Model 10A ($8) is made of polyethylene, a semi-rigid plastic. Model 10AV ($8) is made of extruded vinyl which retains its shape and does not freeze or become dysfunctional when dirty. Model 10AV.1 ($26) is made of extruded vinyl with 1-inch wide cushioned ankle straps, adjustment via hook and loop faste
Foot Harnesses (Models 2A, 2B, & 2C)
The Foot Harness is a foot pedal attachment designed to keep feet fixed in place and provide neutral foot control on surfaces such as wheelchair plates and bicycle pedals. Sold in pairs, these foot harnesses promote proper alignment and weight bearing while helping to avoid injuries to the feet. Mounting hardware is included. The harnesses have a sandal-like design (heel/ankle straps) and a plastic mounting base for snap on/off attachment to the pedals. The length and width are adjustable. SIZES
Rear Entry & Lateral Hip Support
The Rear Entry and Lateral Hip Supports are positioning straps designed for use with standers. The Rear Entry buttock support entry is designed to provide ease of entry for the Vertical Upright Stander (see separate entry). The arm swings out of the way for entry and locks for positioning. The lock can be opened and closed with one hand. An optional abdominal support pad is available for additional support. The Lateral Hip Supports feature a ball and socket mechanism to allow the pads to rotate
Functional Forms Wheelchair Easel / Lap Tray
The Functional Forms Wheelchair Easel/Lap Tray is designed to provide a lightweight alternative to traditional lap trays for wheelchair users. Features include a built-in 20-degree angle, pencil holder/wrist rest, removable carrying strap, magnetic paper holder, and a hidden zippered pouch. This easel also has a water-resistant vinyl or leather covering. WEIGHT: 1 pound.
Rhino Tray (Models 11A & 11B)
The Rhino Tray, models 11A and 11B, is a wheelchair lapboard and work tray for children and adults with lower extremity and mobility disabilities, spinal cord injury, and others who use wheelchairs. PolyLock Fasteners incorporated in design eliminating the need for screws or bolts in the tray surface.. Corners and edges are fully rounded for safety, and the tray tops can be snapped off in an emergency. Custom stomach and control box cutouts available. OPTIONS: Available with Telescoping Mount Ha
Telescoping Mount Hardware For Wheelchair Tray (Model 11.1)
The Telescoping Mount Hardware for Wheelchair Tray, model 11.1, is lapboard mounting hardware designed to secure trays to wheelchairs. This system includes powder coated arms, tubes, rings and poly-lock pegs to enable a lapboard or tray to be mounted to a wheelchair. WEIGHT: 15 pounds.
Tablet Arms Tray (Model 11H)
The Tablet Arms Tray 11H is a swing away lapboard designed for individuals who frequently transfer in and out of a wheelchair. This portable tablet sized tray can be carried in a wheelchair backpack or stored without obstruction by snapping it onto the side of the chair. The tray is made of clear, nearly unbreakable polycarbonate plastic with a rim. Trays are made for right or left hand use. WEIGHT: Approximately 5 pounds.
Little Ram (Model 6A4)
The Little Ram, model 6A4, is a child's tricycle designed for use by children with physical disabilities. The basic unit has a powder-coated steel frame with nylon bushings; a bucket seat with tilt forward/back seat adjustment and infinite back to front positioning; cushioned drop-style handlebars; solid synthetic rubber tires (latex free); large, slip-resistant pedals; turn-stop to help prevent tipping; steel foot crank; and solid wheel rims. There are no steps for getting on this tricycle. DIM
Portable Achievement Carrel (Model 903A)
The Portable Achievement Carrel, model 903A, is a desktop study carrel designed for use by children with communication, learning, or behavior disabilities. This portable carrel creates a semi-private tabletop space to help students concentrate on their work by controlling their surroundings, including the visual environment, light, and sound. The carrel has a back panel and two side panels with optional windows, an angled work surface with an 18-degree slope, a reading easel with a dry erase sur
Big Hug Deep Pressure Positioning Aid
The Big Hug Deep Pressure Positioning Aid is a deep touch pressure device for sensory integration designed for use by children with sensory integration, emotional, or neurological disabilities or autism who benefit from deep pressure stimulus. The child lays down on the pad, which has five adjustable body wraps with hook and loop straps that can provide a range of wrap-around pressure to five separate areas of the body. This product includes an adjustable waist belt and cushioned shoulder straps