• Human-Translated Fact Sheets and Video
  • Large Print

ez-access-division-homecare-products-inc

Results: 35

Sof-Sitz

The Sof-Sitz is a portable, inflatable sitz bath that fits on rim of a toilet or a toilet seat. Made of heavy duty vinyl, the Sof-Sitz is designed to fit all standard toilet seats. WARRANTY: 1-year limited warranty.

Ez-Shampoo Hair Washing Tray

The EZ-SHAMPOO Hair Washing Tray is a shampoo basin designed to enable people who use wheelchairs or cannot shampoo independently to have their hair washed while seated at a sink. The individual can be seated in a chair or a wheelchair and the plastic, latex-free tray rests on the individual's shoulders and extends into the sink for ease in rinsing. The tray featues a neck recess, a drainage opening, and a raised lip around the edges. A Velcro strap extends from the shoulder-end of the tray and

Ez-Access Threshold Ramp (Models 1, 1.5, 2, 3, 4, 5 & 6)

The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate t

Ez-Access Rollup Ramp

The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 in

Ez-Shower

The EZ-SHOWER is a portable shower designed for use with individuals with mobility disabilities or who cannot leave the bed. Made of mildew-resistant vinyl, the EZ-SHOWER hangs on a bed post or IV pole by the wooden carrying handle or nylon cord and holds 2.5 gallons of water. An easy-fill spout prevents splashing snd snaps shut for watertight seal. The included flexible 4-foot hose has an on/off valve for easy water control. WARRANTY: 1-year limited warranty.

Ez-Bathe

The EZ-BATHE is an inflatable bathtub designed for use with individuals with mobility disabilities or who are unable to leave the bed. The user is placed in the deflated tub on the bed using the half sheet transfer method. The 20-gauge vinyl tub Inflates with a vacuum pump in 30 seconds. A hand-held shower head connects to a bathroom faucet and a hose connects to a faucet at a sink or bathtub for filling and draining. The set includes the tub, an inflatable pillow, the hose, the shower head and

Ez-Shampoo Basin

EZ-SHAMPOO is an inflatable shampoo basin for washing the hair of individuals with mobility disabilities or who must remain in bed. The basin can be inflated by mouth or using an air pump (not included). The heavy-duty vinyl basin supports the neck and shoulders and includes a drain hose. Instructions are included. DIMENSIONS (LxWxD): 20 x 24 x 8 inches. WARRANTY: 1-year warranty.

Ez-Access Modular Ramp

The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations.

Pathway Lite (Models As2, As3, As4, As5, As6, As7 & As8)

The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (mod

Ez-Access Suitcase Advantage Series Ramp (Models As2, As3, As4, As5 & As6)

The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS

Ez-Access Suitcase Ramp (Models 2, 3, 4, 5 & 6)

The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches

Ez-Access Rubber Threshold Ramp (Models Thr 250-1 & Thr Riser 225-1 Pr)

The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x

Ez-Access Rubber Threshold Ramp With Beveled Sides (Models Thrw36 150-1)

The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides

Ez-Access Trifold Advantage Series Ramp (Models As5, As6, As7, As8 & As10)

The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into

Cargo Wedge 250

The Cargo Wedge 250 is a cargo area threshold cover designed for use by people with mobility disabilities who use wheelchairs or scooters. The Cargo Wedge is a large mat made of recycled rubber that overlays a van's or minivan's cargo area to raise the level of the cargo area's floor to the same level as the rear door threshold. The Cargo Wedge can be trimmed with a utility knife or a power saw for a custom fit. It has a non-skid surface. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches. CAPACITY: 850 p

Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)

The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe

Scooter Pack (Model Ez0122)

The Scooter Pack is a scooter back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this pack attaches to the back of scooter seat using a soft mesh that slips over the back. It includes headrest grommets if needed. The Scooter Pack has a large interior compartment and a deep side pockets as well as a carrying handle for use as a portable tote. DIMENSIONS (HxLxW): 6 x 16 x 14.5 inches. COLOR: Black.

Arm Tote (Models Ez0123 & Ez0124)

The Arm Tote is a wheelchair or scooter side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, this pack attaches to the armrest of a wheelchair or scooter with the two adjustable straps with plastic fasteners. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0124) or three (model EZ0123) pockets on the outside. SIZES: Large (model EZ0123) and small (model EZ0124). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches

Scooter Single Oxygen (Model Ez0142)

The Scooter Single Oxygen is an oxygen cylinder carrying case for a scooter or a powered wheelchair designed for use by individuals with respiratory disabilities and mobility disabilities or spinal cord injury. Made of water-resistant 420-denier nylon, the case holds "D" and "E" cylinders by adjusting using a bottom snap. An adjustable extra-long top strap with buckle attachment secures the case to most scooter and powered wheelchair seats, and two bottom straps fasten it to the scooter or wheel

Scooter Basket Liner Organizer (Model Ez0126)

The Scooter Basket Liner Organizer is a liner for a scooter basket designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, the liner includes an adjustable drawstring to fit most baskets. There is a zippered front pocket for personal items (e.g. wallet, keys) and two mesh pockets to hold such items as cell phones, remote controls or beverages. DIMENSIONS (HxLxW): 11 x 13 x 10 inches. COLOR: Black.

Wheelchair Pack (Model Ez0200)

The Wheelchair Pack is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this pack attaches to the back of wheelchair seat using buckled straps that fasten over the seat back and loop handles that slip over the wheelchair handgrips. The Wheelchair Pack has a large interior compartment with zippered closure and deep side pockets as well as a carrying handle for use as a portable tote. DIMENSIONS (HxLxW): 5 x

Wheelchair Back Carryon (Model Ez0060)

The Wheelchair Back Carryon, model EZ0060, is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this tote attaches using loop handles that slip over the wheelchair handles. The Wheelchair Back Carryon has large deep pockets. DIMENSIONS (HxLxW): 4.5 x 17.5 x 16.5 inches. COLOR: Black.

Wheelchair Single Oxygen (Models Ez0140 & Ez0141)

The Wheelchair Single Oxygen is an oxygen cylinder carrying case for a manual wheelchair designed for use by individuals with respiratory disabilities and mobility disabilities or spinal cord injury. Made of water-resistant 420-denier nylon, the case holds one or two "D" and "E" cylinders. An adjustable snap allows the carrier to be fitted to the size of the cylinder. An adjustable extra-long top strap with buckle attachment secures the case to most manual wheelchair seats, and it can be positio

Wheelchair Underneath Carrier (Model Ez0160)

The Wheelchair Underneath Carrier is a wheelchair under seat carrier designed for use by individuals with mobility disabilities or spinal cord injury. Made of weatherproof, stain- and mildew-resistant mesh, the carrier has front and back flaps the keep items from sliding out on inclines. It hangs from the frame of the wheelchair directly beneath the seat using Velcro attachment straps. DIMENSIONS (HxLxW): 2 x 17 x 15 inches. COLOR: Black.

Front Mount Walker Carryon (Model Ez0040)

The Front Mount Walker Carryon, model EZ0040, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weather-resistant nylon, this pack attaches to the front of a walker using dual-strap attachment anchors that fasten to the front of the walker’s frame. Features include a detachable beverage holder, a large storage compartment and three deep pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIO

Side Mount Walker Carryon (Model Ez0030)

The Side Mount Walker Carryon, model EZ0030, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weatherproof nylon, this pack attaches to the side of a walker using dual-strap attachment anchors that fasten to the front of the walker's frame. Features include a detachable beverage holder and several pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIONS (DxLxW): 2.5 x 15 x 14.5 inches. COL

Walker Basket Liner (Model Ez0127)

The Walker Basket Liner Organizer, model EZ0127, is a liner for a walker basket designed for use by individuals with mobility or walking disabilities. Made of nylon, the liner includes an adjustable drawstring to fit most baskets. There is a zippered pocket for personal items (e.g. wallet, keys) and two expandable pouches to hold such items as cell phones, remote controls, or beverages. DIMENSIONS (HxLxW): 7 x 16 x 6 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Universal Tote (Models Ez0101 & Ez0102)

The Universal Tote is a carrying bag for a walker or a wheelchair side pouch designed for use by individuals with mobility or walking disabilities or spinal cord injury. Made of nylon, this pack attaches with two adjustable straps to the front of a walker, and the smaller size (model EZ0102) attaches to the armrest of a wheelchair. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0101) or three (model EZ0102) pockets on the outside. SIZES: Large (model EZ01

Universal Crutch Pouch (Model Ez0015)

The Universal Crutch Pouch, model EZ0015, is a carrying bag for crutches designed for use by individuals with mobility or walking disabilities. Made of weather-resistant nylon, this pack attaches to the crutch using adjustable straps with Velcro closure. This pack has a deep pocket, several smaller pockets, and a beverage holder. DIMENSIONS (DxLxW): 1.75 x 10 x 5.5 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Scooter Cover (Model 0125)

The Scooter Cover, model 0125, is a scooter cover designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this cover features elasticized, reinforced seams that fit the cover to the scooter. There are grommets along the bottom edge if the cover needs to be tied down. A cover storage bag is included. DIMENSIONS (HxLxW): 33 x 50 x 22 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Power Chair Cover (Model 0129)

The Power Chair Cover, model 0129, is a wheelchair cover designed for use on powered wheelchairs. Made of weather-resistant nylon, the cover features elasticized, reinforced seams that fit the cover to the powered wheelchair. There are grommets along the bottom edge if the cover needs to be tied down. A cover storage bag is included. DIMENSIONS (HxLxW): 32 x 35 x 23 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Universal Bather (Model Bcw01)

The Universal Bather, model BCW01, is a bathroom caddy designed to attach to a wall or a bath seat. This caddy enables the user to exchange suction cups (for attachment to walls) for nylon straps (for attachment to bath seats), depending on the user’s needs. It is made of vinyl mesh so water can drain and features several storage pockets of various sizes. DIMENSIONS (DxLxW): 13.5 x 10 x 1 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Pathway Modular Ramp (Models Pathway Cs4, Cshr4, Cs6, Cshr6, Cs8, Cshr8, Cs10, & Cshr10)

The PATHWAY Modular Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of aluminum and feature an extruded non-skid surface. Models with the letters "CSHR" in their model number include two side rails. DIMENSIONS (LxW): 48 x 36 inches (models CS4 and CSHR4); 72 x 36 inches (models CS6 and CSHR6); 96 x 36 inches (models CS8 and CSHR8); 120 x 36 inches (models CS10 and CSHR10). The outside width for ramps without

EZ Access Universal Cruth Carry On

The EZ Access Universal Cruth Carry On is a pouch with pockets that attaches to canes and crutches to keeps items close and accessible. Features a large inside pocket, a front zipper pocket, a small side pocket, and an outside mesh pocket.

EZ-Access Scooter Arm Tote

EZ-Access Scooter Arm Tote is used to keep personal belongings safely within reach. Totes attaches quickly and easily to scooter arm using adjustable straps. Also features full-length zipper. It is made of nylon and is available in Black.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions