• Human-Translated Fact Sheets and Video
  • Large Print

mc-mobility-systems-inc

Results: 23

Grab Bar For Car.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab rail for car to assist walking to rear of car to retrieve wheelchair from trunk. Stainless steel rails, 3/4 inch diameter were custom made by a company that manufactures railings for boats. The rails followed the roof line of the car to be as inconspicuous as possible. The rails cost about $85 and were installed by an auto body shop. SKILLS REQUIRED: Metalworking. AUTHOR: Graichen, E. John. TITLE: Grab Bars Cheaper Than New Car. REF: Journal artic

Glide 'n Go Transfer Seat Bifold

The Glide æn Go Transfer Seat Bifold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This flip-down power lift seat raises the user from a wheelchair to vehicle seat level to enable the user to enter and exit an extended cab pickup truck. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The foldaway seat design allows

Easy Reach

The Easy-Reach is a van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift seat allows the original seat of a truck, SUV, van, or minivan to swivel out of the vehicle and lower to wheelchair height. The user then transfers from the chair to the vehicle seat, and presses a button to be lifted into the vehicle. The lift extends from the vehicle at an angle matching that of the door. A manual back-up system in case of vehicle power fa

Glide 'n Go Transfer Seat Single-Fold

The Glide æn Go Transfer Seat Single-Fold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift seat works with full- or mid-size SUVs, minivans, or short cab pickup trucks. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The lift works on either the driver or passenger side in the first or second row of sea

Lectra Aid Person Van Lift

Platform van lift. Dropped swing arm bracket with chair attaches with bolts to door post. Aluminum. Weight approximately 38 pounds. Operates off 12 volt vehicle battery. Seat dimensions 18 by 18 inches. Seat has non-slip neoprene cover. Custom lifts available.

Sure-Lok Parallel Lap Belt (Models Fe200594, Fe200600, Fe200601, Fe200612)

The Sure-Lok Parallel Lap Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt attaches directly to the floor track or plates to secure the passenger separately and independently from the wheelchair securement system. The belt's anchoring hardware is positive-locking to ensure that the belt assemblies cannot be inadvertently released or disengaged. A single push-button function allows the release and evacuation of the o

Sure-Lok Heavy Duty Series A Track (Models 2025 & Fe702-01)

Sure-Lok Heavy Duty Series A Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The track is made of 11-gauge high-strength steel coated with a rust-inhibiting powder, and comes in vertical (model 2025) or horizontal (model FE702-01) styles. OPTIONS: Special length track is available. COLORS: Track is gun metal grey. DIMENSIONS: Horizontal and vertical tracks are both available in 5 or 10 feet sections. WEIGHT: A

Sure-Lok Series L Track

Sure-Lok Series L Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Track is made of aluminum with a natural finish, and is available in heavy-duty or medium-duty weights. Both the heavy-duty and medium-duty track are available in plain style or with flanges or flanges and mounting holes (100-inch length); with four countersunk holes (8 foot length); or with two holes (9 foot section). Medium-duty track is also a

Sure-Lok Series L Single Bolt Floor Plate (Models Fe200784 & Fe200844)

The Sure-Lok Series L Single Bolt Floor Plate is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Both plates have a track section made of stainless steel and come with mounting hardware. Model FE200784 is a surface mount plate and comes with an impact-resistant, plastic ramped collar. Model FE200844 is a flush mount plate and comes with a stainless steel case. WEIGHT: Both models weigh one pound.

Sure-Lok Integrated Combination Belt (Model Fe200727)

The Sure-Lok Integrated Combination Belt, model FE200727, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This system combines a shoulder belt and an integrated lap belt in a fully retractable unit. The unit retracts to the vehicle sidewall; a Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use. The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Ser

Sure-Lok Integrated Lap Belt (Model Fe200595)

The Sure-Lok Integrated Lap Belt, model FE200595, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt is intended for use with the FE500 Series Wheelchair Securement System only (see separate entry). It attaches directly to the rear strap assembly of the wheelchair securement system, and provides an occupant restraint system that is an integrated part of the wheelchair securement. Its restraint capability is dependent upon

Companion 3-Wheel Scooter (Model Gc-221)

The Companion 3-Wheel Scooter, model GC-221, is a compact scooter designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, and tail light. The floor board is partially carpeted. FRAME(LxW): 41 x 23 inches. The turning radius is 30 inches and ground clearance is 3.5 inches. The scooter disassembles for transport. Color choices are vermillion red, Arctic blue, or Sahara. CONTROLS: 70-amp programmable, electronic speed contr

Qrt Retractable Securement System System (Models Q-8100-A1 & Q-8200-A1)

The QRT Retactable Securement System is a wheelchair restraint system designed to secure wheelchairs and their occupants in transit and para-transit buses. This system can be mounted on tracks, walls, swing arms, floors, seats, flip seats, or barriers. The system retracts out of sight when not in use and a hard cover protects it from damage. Model Q-8100-A1 is the deluxe system and includes four QRT automatic retractors, an all new adjustable lap/shoulder belt combination, interchangeable self-t

Braun 4 Way Power Seat Base

Powered seat base travels 15 inches front to back and 5 inches vertically to allow easy transfer from wheelchair to driver's seat. Accommodates needs of most drivers who can transfer. Operates with push button switch. Installs with 4 bolts. Factory seat or custom driver's seat makes this unit suitable for most vehicles. Switch may be hand held or mounted in convenient location. Seat base measures 34 1/2 inches long by 16 1/2 inches wide and 6 1/2 inches high in low position. Operates with 12 vol

Braun 6 Way Power Seat Base

Powered seat base travels 15 inches front to back and 5 inches vertically to allow easy transfer from wheelchair to driver's seat. Accommodates needs of most drivers who can transfer. Operates with push button switch. Installs with 4 bolts. Factory seat or custom driver's seat makes unit suitable for most vehicles. Switch may be hand held or mounted in convenient location. Seat base measures 34 1/2 inches long by 16 1/2 inches wide by 8 1/2 inches high in low position. Operates with 12 volt DC e

Platform Van Lift

Van lift mounts outside rear door. For individual who does not drive, but needs assistance entering and exiting van. Features nonskid surface platform. Requires manual folding and unfolding of platform. Control push button to raise and lower platform. Fits Chevrolet, Ford and Dodge vans. CAPACITY: 700 pounds. DIMENSIONS: Platform size is 45 inches long, 55 inches wide.

Companion Seat

The Companion Seat is an adjustable position van seat designed for use by individuals with mobility disabilities. Designed for use with the front passenger seat of Chrysler Town & Country, Dodge Caravan, Plymouth Voyager, and Ford Windstar minivan's, this unit utilizes the van's existing seat but replaces the seat base with a powered seat base. The powered seat base extends the seat a full 20 inches out from the standard seat location and tilts it 6 inches forward. To enter the van, the seat

Wheelchair And Occupant Belt / Track System.

The Wheelchair and Occupant Belt/Track System has successfully impact tested at 30 MPH/20G. This test simulated the performance criteria required in FMVSS ##208, 209 and 210. Two models of shoulder restraints available, wall mounted non-retractable, and retractable. Tracks are installed in the floor of the van, in front and behind the chair, to lock the front and rear of the wheelchair frame in place. Web stiffeners are installed in the lap belt portion of the restraint to assist in connecting t

Braun Built Automatic Swing Door Operators For Rear Post Swing-A-Way Lift

Door operator package to work with swing doors in vans with the rear post Swing-A-Way lift (Chevy and Ford full size vans only). Sequenced to operate with one switch and uses the same peripheral controls as other Braun lifts. Quick release mechanism to freely open the doors in the event of a power failure.

Fully Automatic Van Lifts (L100 & L400 Series)

Platform van lift with welded steel construction and fully automatic operation. Built in handrail. Lift has models to fit most side slide, side double, and rear van and commercial vehicle doors. Box frame construction provides rigidity without relying on the vehicle side wall strength. Hydraulic pump provides quiet operation. Roll-stop on front of platform. Circuit breaker protects against electrical overload. Optional control box may be mounted outside the vehicle for convenience. Lift models p

Fully Automatic Mini Van Lift-A-Way Lifts

Platform van lift with welded steel construction and fully automatic operation. Built in handrail. Lift models to fit most side slide doors on domestic and imported minivans and double rear doors on some domestic minivans. Box frame construction provides rigidity without relying on vehicle side wall strength. Hydraulic pump for quiet operation. Roll-stop on front of platform. Circuit breaker protects against electrical overload. Optional control box may be mounted outside the vehicle for conveni

Semi Automatic Mini Van Lift-A-Way Lifts

Platform van lift with welded steel construction and semi-automatic operation. Optional handrail. Lift folds and unfolds manually to and from storage position. Lift models to fit most side slide doors on domestic and imported minivans and double rear doors on some domestic minivans. Box frame construction provides rigidity without relying on vehicle side wall strength. Hydraulic pump for quiet operation. Roll- stop on front of platform. Circuit breaker protects against electrical overload. Optio

Q'straint System (Model Q-5001-T)

The Q'Straint System, model Q-5001-T, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. This model can be mounted on heavy-duty, floor-mounted aluminum L track (available with or without flange; not included), wheelchair tie-down straps, and occupant shoulder and lap belts. The complete system includes two rear belts, two front belts, one lap belt, one shoulder belt, one driver instruction guide, one instruction adhesive label, and one warranty card

 
Processing...


Driving Walking/Biking Public Transit  Get Directions