• Human-Translated Fact Sheets and Video
  • Large Print

pride-mobility-products-corporation

Results: 105

Shuttle

The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the

Legend Xl

The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-w

Celebrity Xl (Model Sc4450Dx)

The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control

Wrangler (Model Pmv 600)

The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear moto

Hercules (Models 2000 & 3000)

Hercules, model 2000 and 3000 is a trunk mounted scooter loader or van lift designed to lift scooters into vans or car trunks. These lifts feature an aluminized bronze sprocket that is non-corrosive and stronger than most steel. The sprocket assembly creates a four-to-one gear ratio for increased lifting capacity and the assembly is supported by a haf-inch steel shaft and needle bearing. The gearbox location allows greater height clearance and a low center of gravity provides ease in handling. T

Country Lift Chair (Model Tmr-400)

The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps

Pride Body Lounger (Models Tmr-570 & Tmr-670)

The Body Lounger, models TMR-570 and TMR-670, are seat lift recliner chairs designed to assist individuals with limited mobility in rising from the chair. This chair features four rubberized leveler legs; an oak frame; fire retardant materials; quick- disconnect electrical components; custom fit pillows with zipper closure allow the removal or addition of poly fiberfill; a contoured ottoman and seat cushion; a large side pocket; and a double plate, wide-base, steel frame for stability. The chair

Rally

The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control

Sidekick

The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv

Gentle Lift Recliner (Models Tmr48, Tmr49, Tmr348, Tmr329, & Economy)

The Gentle Lift Recliner line includes 2- and 3-position, fully reclining seat lift chairs designed to assist individuals who have difficulty sitting down in or getting up from arm chairs. Features include a hardwood (oak) frame; fire retardant materials; quick disconnect electrical components; arm, headrest, and frame covers; a double plate, wide base with steel base frame for stability; and a large side pocket. The entire chair lifts with the user seated to raise the user to a standing positio

Jazzy 1170 Xl Plus (Models 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1170 XL Plus, models 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46.25 x 30 inches with a 4-inch ground clearance and a 26.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dy

Jazzy 1420 (Models 2Hd-Ss, 2Hd-C, 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1420, models 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46 x 27.25 inches with a 4.5-inch ground clearance and a 25.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by indep

Jazzy 1650 (Models 3Ehd-Ss & 3Ehd-C)

The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red,

Jazzy Select Elite

The Jazzy Select Elite is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.375 x 22.75 inches with a 1.5-inch ground clearance (at anti-tips) and a 24.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 3-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with s

Jazzy Select 6

The Jazzy Select 6 is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.625 x 23.5 inches with a 2-inch ground clearance (at anti-tips) and a 20.5-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with Active-Trac suspension and an articulating rear caster beam. The chair is available in red and blue. CONTROLS: 40 amp PG GC 2 controller. MWD: Two-moto

Jazzy Select Hd (Models Hd-Ss & Hd-C)

The Jazzy Select HD, models HD-SS and HD-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 37.75 x 25 inches with a 2.5-inch ground clearance (at anti-tips) and a 27-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 6-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazz

Jazzy Elite 6 (Models 2S-C & 2S-Ss)

The Jazzy Elite 6, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 23.25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-li

Jazzy 600 (Models 2S-C, 2S-Ss, 3S-C, 3S-Ss, 3Sp-Ss & 3Sp-C)

The Jazzy 600, models 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS and 3SP-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.5 inches with a 3-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in champagne, candy apple red, viper blue, black onyx, kelly green, pewter, emerald green, sapp

Jazzy 614 (Models 2S-C & 2S-Ss)

The Jazzy 614, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD):

Jazzy 614Hd (Models 2Hd-C & 2Hd-Ss)

The Jazzy 614HD, models 2HD-C and 2HD-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (Wx

Z-Chair

The Z-Chair is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 29 x 19 inches (without foot platform) with a 1.75-inch ground clearance and a 26.75-inch turning radius (with foot platform). This lightweight wheelchair has a limited suspension and a 3-inch rear anti-tips. The chair can be disassembled into 4 parts for easy transport. The chair is available in red and blue. CONTROLS: 40 amp

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Jazzy Select 14 (Models 14-C & 14-Ss)

The Jazzy Select 14, models 14-C and 14-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 38 x 24.75 inches (without front riggings) with a 3-inch ground clearance and a 21-inch turning radius. This wheelchair has limited suspension and a non-folding frame. The chair is available in blue and red. CONTROLS: 60 amp joystick controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The st

Jazzy 1113 Ats (Models 2Sp-C & 2Sp-Ss)

The Jazzy 1113 ATS, models 2SP-C and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 23 inches with a 2.5-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac suspension, a low center of gravity and a non-folding frame. It has 6-inch front anti-tips. The chair is available in viper blue, onyx black, champagne and candy apple red. CONTROLS: 5

Jazzy Freedom

The Jazzy Freedom is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT

Quantum Dynamo

Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes a

Quantum Dynamo Ats

Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Syne

Go-Go Elite Traveller 3 Wheel Scooter (Model Sc40E)

The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver)

Go-Go Elite Traveller 4-Wheel Scooter (Model Sc44E)

The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are stand

Go-Go Ultra 3 Wheel Scooter

The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. T

Celebrity X 3 Wheel

The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features a

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Sonic

The Sonic is a lightweight three-wheeled scooter designed for indoor use by individuals with mobility disabilities. FRAME(LxW): 37 x 21 inches with a 28-inch wheel base. The turning radius is 34 inches and the ground clearance is 1.75 inches. The frame has disassembles into four parts for transport. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 18 x 16 foldable molded plastic seat. T

Revo 3 Wheel

The Revo is a compact three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 43 x 21.5 inches with a 30.5-inch wheel base. The turning radius is 38 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip

Revo 4 Wheel

The Revo 4 Wheel is a compact four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 44.75 x 21.5. The turning radius is 50 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt d

Hurricane (Model Pmv5001)

The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo

Pride Silverstar Single Fold Ramp

The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.

Pride Silverstar Solid Ramp

The Pride SilverStar Solid Ramp is a ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp has built-in traction control and side rails for safety, and is slotted for moisture drainage. It comes with securement components for mounting. DIMENSIONS (LxW): 1.5, 2, 3, 4, or 5 feet x 30 inches. CAPACITY: 600 pounds. WARRANTY: 3 year transferable warranty.

Victory 9 3-Wheel Scooter (Model Sc609)

The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder;

Victory 9 4-Wheel Scooter (Model Sc709)

The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering

Victory 9 Ps 3-Wheel Scooter (Model Sc609Ps)

The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steeri

Victory 10 3-Wheel Scooter (Model Sc610)

The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering.

Victory 10 4-Wheel Scooter (Model Sc710)

The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTI

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-10)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 3-Position Full Recline Lift Chair (Model Cl-15)

The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord.

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-20)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 3-Position Full Recline Chaise Lounger (Model Cl-30)

The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a c

Pride Heritage 3-Position Full Recline Large Chaise Lounger (Model Gl-358L)

The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Heritage 3-Position Full Recline Medium Chaise Lounger (Model Gl-358M)

The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Chaise Lounger (Model Gl-358P)

The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger (Model Gl-358Pw)

The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to

Pride Heritage 3-Position Full Recline Small Chaise Lounger (Model Gl-358S)

The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Heritage 3-Position Full Recline Heavy-Duty Chaise Lounger (Model Gl-358Xl)

The Pride Heritage 3-Position Full Recline Heavy-duty Chaise Lounger, model GL-358XL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to t

Pride Heritage 2-Position Partial Recline Chaise Lounger (Model Gl-358Xxl)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair

Pride Heritage 2-Position Partial Recline Lift Chair (Model Gl-58)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Elegance 3-Position Full Recline Large Chaise Lounger (Model Lc-570L)

The Pride Elegance 3-Position Full Recline Large Chaise Lounger, model LC-570L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Medium Chaise Lounger (Model Lc-570M)

The Pride Elegance 3-Position Full Recline Medium Chaise Lounger, model LC-570M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Chaise Lounger (Model Lc-570P)

The Pride Elegance 3-Position Full Recline Petite Chaise Lounger, model LC-570P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger (Model Lc-570Pw)

The Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger, model LC-570PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing a

Pride Elegance 3-Position Full Recline Small Chaise Lounger (Model Lc-570S)

The Pride Elegance 3-Position Full Recline Small Chaise Lounger, model LC-570S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Wide Chaise Lounger (Model Lc-570W)

The Pride Elegance 3-Position Full Recline Wide Chaise Lounger, model LC-570W, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitti

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-450)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-450, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550L)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550M)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550S)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-585)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-585, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-590)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-590, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-595)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-595, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bo

Pride Specialty 3-Position Full Recline (Model Gl-310)

The Pride Specialty 3-Position Full Recline Lift Chair, model GL-310, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a co

Pride Specialty 3-Position Full Recline Chaise Lounger With Transfer Arms (Model Ll-570T)

The Pride Specialty 3-Position Full Recline Chase Lounger with Transfer Arms, model LL-570T, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty 3-Position Full Recline Chaise Lounger With Flip-Open Arms (Model Ll-571)

The Pride Specialty 3-Position Full Recline Chase Lounger with Flip-open Arms, model LL-571, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty 3-Position Full Recline Chaise Lounger With Footrest Extension (Model Ll-575)

The Pride Specialty 3-Position Full Recline Chase Lounger with Footrest Extension, model LL-575, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control con

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770L)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770L, is a seat lift chair sleeper, and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and li

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770S)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and for use as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lif

Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger (Model Ll-805)

The Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger, model LL-805, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connecte

Pride Media Chair (Model Lc-900)

The Pride Media Chair, model LC-900, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift

Pride Specialty 3-Position Chaise Lounger (Model Lc-102)

The Pride Specialty 3-Position Chaise Lounger, model LC-102, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. This model chair differs from most other Pride lift chair models in that it is constructed with an overall smaller frame. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bot

Pride Specialty 3-Position Full Recline Chaise Lounger (Model Lc-105)

The Pride Specialty 3-Position Full Recline Chaise Lounger, model LC-105, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125L)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125M)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125S)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Quantum 600 Sport HD Powerchair

Pride Quantum 600 Sport HD Power chair is a bariatric wheelchair designed for use by individuals with limited lower extremity mobility.  It is equipped with high-torque motors and heavy-duty suspension, which is ideal for outdoor use.  The mid-wheel drive allows it to maneuver indoors. It is designed for those that want to make regular use of their power chair outside.  The Pride Quantum 600 Sport HD can ride over uneven terrain.  It has a top speed of 4 miles per hour and a large 70 Ah battery.

Pride® Fusion

The Pride® Fusion is a power wheelchair designed for use by individuals with limited lower extremity mobility as a result of a spinal cord injury, stroke or multiple sclerosis.  It is a rear-wheel drive power chair and is available with a maximum speed of up to 4 miles per hour (6.5 km/h).  Available in configurations: 1. Power Tilt and Manual Recline 2. Power Tilt and Power Recline

Pride Revo 2.0 4 wheel scooter (Model S67)

The Pride Revo 2.0 is a full-size high weight capacity scooter that is an ideal scooter for all day use with a 13 mile per charge battery life range and has the transportability of a transportable scooter. The scooter fits in a car trunk and has a wide base for increased stability.

Victory 10.2 4-Wheel

The victory 10.2 by Pride is designed for people with limited mobility. The tiller brings the convenience of an additional storage area and built-in cup holders. The tiller improvements also includes a handy USB charging port. New frosted LED headlights will focus on the path ahead to help guide the user.

Victory 10.2 3-Wheel

The victory 10.2 by   Pride is designed for people with limited mobility.  The  tiller brings  the convenience of an additional storage area and built-in cup holders.  The tiller improvements also includes a handy USB charging port. New frosted LED headlights will focus on the path ahead to help guide the user.

Go-Go Sport 4-Wheel

The go go sport 4 wheel scooter by Pride  is designed for people the limited mobility. The scooter has a weight capacity of 325 pounds yet small and transportable enough to fit in most car trunks.. The size of the scooter makes it easy to move in small spaces

Go-Go Sport 3-Wheel (Model S73)

The Go-Go Sport is designed for people with  limited  mobility The scooter comes apart for easy transport and has a longer frame for user comfort.. The scooter comes  with powerful 18 amp hour  batteries for a 12.7 mile max range and a 325 pound  weight capacity.

Pride Pursuit PMV (Model S713)

The big, heavy-duty Pursuit PMV from Pride is  designed for people with disabilites. With 13 inch  wheels  the scooter is made to handle rugged terrain. IThe scooter has an 7.25 miles per hour top speed, standard full lighting package which makes the scooter ideal for eaveryday use.

Jazzy 600 ES

The Jazzy 600ES  by Pride is designed for people with limited mobility. and has  a per charge range of up to 16.65 miles. The compact design of the 600ES creates a small 20.5 inch  turning radius that is easy to manage in small spaces  The Jazzy 600ES also has  a suspension system that provides a smooth ride and allows  the user to use this chair outdoors as well.

Jazzy Elite 14

The Jazzy Elite 14 by pride is designed for people with limited mobility wanting to increase independence. The user will appreciate the two-motor front wheel drive that allows easy movement in small spaces. The Jazzy Elite 14 is a comfortable and sturdy powerchair. 

Jazzy Air

The Jazzy Air power wheelchair by Pride Mobility is designed for people with limited mobility. The chair allows the user to elevate the chair while it is moving. This feature allows the user to fully participate in life fully.

Jazzy Air 2

The Jazzy Air 2 power wheelchair by Pride is designed for people with limited mobility. The powerchair has a power elevating seat that raises 12 inches. Like the Jazzy air 1 by Pride the seat raises and lowers as the chair is in motion. The chair elevation allows the user to sit at a high top table and fully participate in life. 

Jazzy Air Extended Range

The Jazzy Air Extended Range by Pride. is desinged for people with limited mobility. The user can travel  18.4 miles on a single charge.  This power wheelchair allows the user  to raise and lower the chair while the chair is moving and fully particapate in life.

Jazzy Elite HD

The Jazzy Elite HD by Pride   is designed for people with limited mobily. With a weight capacity of 450 pounds the chair can fit many body types. The chair has many seat styles and sizes to choose from. The  seats are depth adjustable on the standard seats, while the Solid Pan Seat option gives the user a solid surface for seat cushion. The Jazzy Elite HD also comes with a standard, 60 inch  lap-belt included (unless otherwise noted) for maximum security.

Jazzy 1450

The Jazzy 1450 by pride is designed for people with limited mobility. With a 600  pound weight capacity the chair is ideal  for users of any body type. The chair has swing arm suspension.

Pride Pursuit XL PMV (Model S714)

The Pursuit XL PMV from Pride Mobility is designed for people with limited mobility. The scooter is a rugged and heavy-duty scooter with great comfort and safety features.  The scooter features a 400 lb. weight capacity and Delta tiller with wraparound handles for easier handling.  It has a full LED lighting package that includes turn signals and a headlight

Victory Sport

The Victory Sport by pride is designed for people with limited mobility. With a top speed of 8 miles per hour, the user will enjoy tooling around town on this reliable ride. The high-back captain’s seat has memory foam inserts, which make it more comfortable on long rides. The seat also swivels and slides forward and back to let the user adjust it to  most comfortable position for the user. . LED lighting, and turn signals are included for additional safety when driving after dark.

Victory 9.2 3-Wheel

The victory 9.2 3 wheel by Pride is designed for people with limited mobility.  The new  tiller brings the user  the convenience of an additional storage area and built-in cup holders. The tiller improvements also include a handy USB charging port. The new frosted LED headlights will focus on the path ahead to help guide user while riding in the dark.

Victory 9.2 4-Wheel

The victory 9.2 4 Wheel by Pride is designed for people with limited mobility.  The new  tiller brings the user  the convenience of an additional storage area and built-in cup holders. The tiller improvements also include a handy USB charging port. The new frosted LED headlights will focus on the path ahead to help guide user while riding in the dark.

Go-Go Folding Scooter

The Go-Go Folding Scooter by pride is designed for people with limited mobility. The scooter can easily collapse to a minimal 30 inch height, 19 inch  width, and 1inch  depth in three simple steps, making stowing it in  in the u car, cabin on a cruise ship or when at the airport  easy: just fold the seat, pull the lever, fold and lock the tiller. The heaviest piece weighs just 51.4 pounds. The Standard 12 AH batteries are included and have a per charge range of up to 9.3 miles.

Go-Go ES2 3-Wheel Scooter

The Go-Go ES2 is designed for people with limited mobility. The scooter the entry-level model of the  Go-Go travel scooter series. This scooter is great for users that want convenience and the freedom to get out and about. The ES2 has a lightweight, compact frame that features a folding tiller and folding seat. The seat does not swivel.  Although it doesn't disassemble, the seat can be removed so the ES2 can be transported in a trunk.

Go-Go Ultra X 3-Wheel

The Go-Go Ultra X scooter is designed for people with limited mobility.  The scooter is  lightweight, agile ride that is  ideal  for use indoors, or outdoors on smooth, level ground. The Go-Go Ultra X comes equipped with 12 AH batteries, charger, flat-free tires and a front basket. The batteries can be charged on or off the scooter and the charging port is located on the battery box, just above the floorboard. The seat swivels for easy on and off access. It’s easy to take apart for transport, an

Go-Go Ultra X 4-Wheel

The Go-Go Ultra X scooter is designed for people with limited mobility.  The scooter is  lightweight, agile ride that is  ideal  for use indoors, or outdoors on smooth, level ground. The Go-Go Ultra X comes equipped with 12 AH batteries, charger, flat-free tires and a front basket. The batteries can be charged on or off the scooter and the charging port is located on the battery box, just above the floorboard. The seat swivels for easy on and off access. It’s easy to take apart for transport, an

Go-Go Elite Traveller 3-Wheel

The Go Go Elite Traveller 3- wheel scooter is designed for for people with limited mobility. The scooter  offers easy disassembly, a lightweight frame and a super tight 33 inch turning radius. The scooter is versatile and easy to handle, the heaviest piece weighs only 28 pounds for loading in the car. The Elite Traveller 3- wheel has straight handlebars, not the delta style tiller, and features an additional charging port located up on the tiller for easy access.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions