The Uni-Lite is a wheelchair lift for vans designed to ensure smooth, safe entry and exit for wheelchair users. With its compact design and large, non-skid, .25-inch thick aluminum platform, this lightweight conversion loader is adjustable to fit most van doors and is intended to maximize passenger space. Operated by a high-torque electric motor and direct gear drive, it features twin handrails with a control switch, a high-strength, aluminum alloy construction and a built-in manual backup syste
The Ricon KlearVue K-Series Folding Platform Lift is a platform van and bus lift designed for use by individuals with mobility disabilities. The platform folds in half for stowing. When stowed, it provides an unobstructed view of the road for the driver and for passengers. Because the platform folds, it can accommodate scooters and wheelchairs that require a longer platform without modifications to raise the roof or door. Other features include a built-in manual back-up system (hand pump to move
The Ricon Reliant S-Series Wheelchair Lift is a platform van lift designed for use by individuals with mobility disabilities. This compact van lift has a steel frame and hydraulic pump. Other features include no-lube bearings at all major pivot positions; Sto-Loc technology that locks the platform in the stowed position; automatic inboard/outboard rollstops; a non-skid platform; handrails; a control switch for lowering and raising the lift; and a built-in manual backup system. OPTIONS: Power rem
Mirage Transit is a bus lift designed for use by individuals with mobility disabilities. Constructed of steel and aluminum, this underfloor lift stows away in an enclosure beneath the vehicle floor when not in use, leaving the doorway clear. The enclosure also protects the lift from rain, snow, and dirt. The lift raises, lowers, stows and deploys at the touch of a button, using hydraulic power provided by a remotely located hydraulic Power Pak. Manual backup is standard. POWER: Hydraulic Power P
PowerLift is a bus lift designed for use by individuals with mobility disabilities. This lift raises and lowers a bus passenger in a wheelchair between ground level and the level of the bus floor. It features a compact design and durable construction. WARRANTY: One year limited warranty; extended warranty available.
BayLift is a bus lift designed for use by individuals with mobility disabilities. This compact lift is contained in an enclosure in the luggage bay of the bus. Constructed of steel, the system uses an electro-hydraulic lift with manual backup (hand pump for up, pressure release valve for down). DIMENSIONS (HxLxW): Enclosure is 37 x 18 x 38 inches. Maximum usable platform area is 48 inches long x 29 inches wide. Maximum floor to ground travel is 62 inches. CAPACITY: 600 pounds. WEIGHT: 590 pound
The BiFOLD Ramp is a bus ramp designed for use by individuals with mobility disabilities. This double-folding, underfloor ramp can be installed for front or rear entry on a low-floor bus. The ramp is hydraulically operated with a manual back-up system that requires no valve or switch movement. It has a non-slip surface and stows flat. DIMENSIONS (LxW): Maximum usable platform area is 58.4 x 31.8 inches. CAPACITY: 660 pounds. WARRANTY: One year limited warranty; extended warranty available.
The FOLDover Ramp, model FR2SS, is a bus ramp designed for use by individuals with mobility disabilities. This folding ramp can be installed for front or rear entry on a low-floor bus to provide access for passengers with wheelchairs, walkers, shopping carts, or strollers. The ramp has a non-slip surface and stows flat. Its hydraulically operated drive assembly controls platform speed through stowing and deployment. The manual back-up system requires no valve or switch movement. DIMENSIONS (LxW
The SLIDEout Telescopic Power Ramp, model PF5000, is a bus ramp designed for use by individuals with mobility disabilities. This ramp provides access to low-floor buses and tucks away when not in use. The ramp is made of stainless steel and aluminum and features a stainless steel enclosure and an electric ball-screw drive system, a solid state PWM electronic controller, proximity switches, current-limiting circuitry to protect the drive system from damage, and manual back-up. Ramp movement stop
The Express Ramp is a ramp for a rail car designed for use by individuals with mobility disabilities. When deployed, this stainless steel ramp bridges the gap between the rail car door and the station platform. When not in use, it stows in an unobtrusive vestibule in the floor of the rail car. The ramp's operation is fully automatic using a drive system that is compatible with existing rail car controls. Manual backup operation is also available. DIMENSIONS (LxW): Maximum usable bridgeplate area
Semi-automatic wheelchair lift, electric/hydraulic powered. 31 inch lift travel. Fits in vans with 40 inch doorway width. Overall platform size 32 inches wide by 45 inches long. 47.5 to 61.5 inch maximum entry height via 4 models. 7 second lift time. All steel frame construction. 130 amp maximum load electric motor with hand pump backup. Pendant switch operation by attendant only. CAPACITY: 800 pound maximum lifting capacity.
The 6-Way Power Seat Base is a vehicle driver powered seat base for people with lower extremity and mobility disabilities and spinal cord injury. The seat base eases transfers to and from a wheelchair. It has a front-to-rear travel of 13.5 inches, a height adjustment of 9 inches, and a 90 degree power swivel. All functions are independent to create numerous adjustments. The seat base is adaptable to most factory or retrofit vehicle seats. POWER: Vertical power is operated by 12 Volt DC, 16 Amp c
The Ricon S-Series Lifts are platform van lifts designed to provide access for wheelchair users to vans and public transit vehicles. These lifts feature easy-to-grasp curved handrails, a steel mesh platform, an inboard rollstop that prevents the wheelchair from inadvertently rolling toward the vehicle when the lift is below floor level, an outboard mechanical rollstop that operates even when the vehicle is as much as four feet from the curb, raised platform sides, and patented electrically inte
The FOLDover 1:6 Low Floor Bus Ramp ER7 Series is a bus ramp designed for use by individuals with mobility disabilities. This electric ramp is made of stainless steel and aluminum alloy. It has a 1:16 slope and provides access to low floor buses with a floor height of 12 inches or less. A stainless steel chain and counterbalanced ramp platform allow for manual deployment or stowage. Its mechanism and controls are water resistant. An electro-magnetic latch system secures the ramp in the stowed p