Seeker II is a powered all-terrain wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain wheelchair is designed for indoor or outdoor use on sand, grass, mud, snow, or rocky conditions. FRAME (HxW): 36 x 31.5 inches with a 16-inch seat; folded the wheelchair is 21 inches wide. The plastic folding frame has molded ABS plastic plates and hinges and left and right side panels. The chair also has a removable anti-tilt bar and ground clearance of 7 inches. A removable nylon top with an aluminum frame is optional. CONTROLS: Dual 24-volt dynamic motors / controller. RWD: Rear wheel drive with Kevlar belts and composite pulley drive system. SEAT (W): 12, 14, 16, 18, or 20 inches. Underseat storage is standard. Options include a Velcro and plastic seatbelt assembly, a 4-strap trunk support system, and a removable custom-made head rest support. UPHOLSTERY: Heavy duty nylon upholstery in teal, red, dark blue, light blue, gray, and purple. ARMRESTS: Removable armrests with built-in drink holder. BRAKES: Controller has built-in parking brake. CASTERS: Two front casters. WHEELS: Two rear wheels with puncture-resistant pneumatic tires, handrims, and stainless steel and titanium axles with stainless steel bearings. FOOTRESTS: Removable multi-position footpad assembly. POWER: Uses two 12-volt sealed batteries in removable battery box with quick release system; a battery charger is included. SPEEDS: 5 miles per hour. CAPACITY: 250 pounds. WEIGHT: 105 pounds without batteries; 145 pounds with batteries. WARRANTY: One year warranties on motors, controller, and battery; 5 year limited warranty on all molded plastic parts against product separation or splitting which includes side panels, armrests, main rims and caster rims only. The warranty does not apply to axle bearing support housings for caster and main wheel assemblies, side panel axle support areas and support brackets for removable top.