Category: Emergency Alert System with Monitoring Service

Remote Assistance

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

The Remote Assistance is a remote medical alarm that will allow a person to alert those near by to an emergency. It can be placed with double adhesive tape on the outside of an apartment door, given to a next door neighbor, or given to a caretaker. The remote works in two ways: the first method is via the remote clicker for conscious assistance, and the second method is with micro controller that can monitor the users heart rate vitals.

Note: This is not a new concept but having access to this without having to spend hundreds or thousands of dollars make it feasible for more people and possibly save someone's life. The device is not meant to replace certified medical equipment.

Technical Specifications: 

Material: 3D printed parts. 

Battery: Rechargeable Lion Battery pack.

Control: Control car transmitter. 

Light: Flashing light lamp siren home security wired sound alarm

Button: One click on and one click off.

Stable:Yes, soldered and glued. 

Durable: Yes. 

Color: White, red and blue.

Battery: Yes.

Electronic components: Control Transmitter, Rechargeable lion Battery pack, and a flashing light lamp siren home security wired sound alarm.

Assembly components: First take the battery pack and strip back the wire to the male connector and tin them with a soldering iron. Next take the light and siren out of the flasher and wire it up to the output on the relay module. Next take the stripped end of the battery connector and connect the proper polarity of wire to the power input on the relay module.

Now take the clear red cross (you can print it in clear then color the inside red with sharpie) and glue it where it rests snugly to the out side of the case.Then take all the electronics and hot glue them in place. (the switch on the battery fits in the rectangle on the bottom and the female end can fit in the circle cut out on the side.) make sure the light is in the red cross. Follow the instructions with the relay to make sure the button is set to one click on one click off. Test it then if everything works screw or glue the back on and place it where every or with who every you can trust will help.


Price Check
as of: 
Additional Pricing Notes: 
Contact Vendor
Remote Assistance