Category: Monitor Accessories

Monitor Stand

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to work on a computer in a reclined position. The monitor must be placed above the user with the face angled downward. To accomplish this, a commercially available monitor support arm was modified. The monitor mounting plate was removed and replaced with a plywood plate attached to the pivoting sub-base with a pair of hinges. Threaded rod, rod couplings, and steel flat stock were used to fabricate a simple crank mechanism that provides 45 degrees of tilt. Careful placement of the mechanism and the monitor with attention to the center of gravity enabled the crank to be turned with minimal effort. The monitor base was removed so it sits flat on the mounting plate. L-shaped upright supports at the front edge of the monitor and a web strap across the top add safety features and prevent monitor movement throughout the range of tilt. SKILLS REQUIRED: Carpentry, metal work, and assembly. TITLE: Monitor Stand for Computer Worker. WEB SITE: Tech Connections at REF: Browse Case Examples. Tech Connections can also be contacted at 490 10th St. N.W., Atlanta, GA 30318; 877-TEK-SEEK (835-7335) (V/TTY),404-385-0641 Fax. 2003.


Price Check
as of: