Braille Printer
Results: 36
Basic-S Model 70021
The Basic-S is a single-sided Braille printer or Braille embosser designed for use by persons who are blind or have low vision. The Basic-S uses continuous tractor-feed paper and can print single-sided pages at a rate of 170 pages per hour. The control panel is labeled in both Braille and ink, and voice confirmation is provided when keys are pressed. The Basic-S supports as many as 20 Braille alphabets, and can also print Braille graphics (tactile graphics). This printer comes with a copy of Win
Braille Bookmaker
The Braille BookMaker is a portable desk-top Braille printer that produces Braille characters on both sides of the page for individuals who are blind. Commands are issued from a calculator-style keypad, and confirmed by tones so that the operator can change settings without having to print out prompts and responses in Braille. A brief comma sequence places the unit in single-sided mode, where it can become a terminal using the optional external keyboard, or generate samples for easier proofreadi
Braille Express (Models 100 & 150)
The Braille Express, models 100 and 150, is a Braille printer designed to print in book format with two pages on each sheet for individuals who are visually disabled. The printers offer interpoint Braille at a rate of 100 or 150 characters per second. They both print up to 44 characters per line macimum, combine text and graphics on a single sheet, save up to 16 full groups of settings, and emboss raised print characters for tactual or visual reading. A rear panel impact control selector allows
Braille Printer (Model Bpw-32)
The Braille Printer, model BPW-32, is a desktop braille printer designed for use by individuals who are blind or have low vision. This printer can emboss six- or eight-dot braille on a single side, or on both sides simultaneously using either the interpoint or interline method. The noise level has been reduced by using an embossing method that pushes the braille embossing pins into the paper instead of striking the paper. This embossng method also allows an entire line of braille to be printed a
Braille Printer (Model Tp-32)
The Braille Printer, model TP-32, is a desktop braille printer designed for use by individuals who are blind or have low vision. The printer can emboss six-dot or eight-dot braille on one side, or on both sides simultaneously using either the interpoint or interline method. The noise level has been reduced by using an embossing method that pushes the braille embossing pins into the paper instead of striking the paper. This embossng method also allows an entire line of braille to be printed at th
Brailleplace
BraillePlace is a braille printer designed for use by individuals who are blind or have low vision. This interpoint embosser has a print speed of 300 characters per second and is designed for use in braille publishing. It can print lines 45 characters wide using Library of Congress spacing, with 27 lines per page maximum. It connects to any computer through the parallel or serial ports, and has keypad controls with ET Speaks to vocalize controls and do other audio tasks. Braille can be printed i
Braillo 200
The Braillo 200 is a Braille printer that can print six and eight dot braille at 200 cells per second. A liquid crystal display indicates the page count. Operator controls include form feed, reset, and paper stop. The printer may be connected directly to a paper cutter. The page lenths and line length are both adjustable; the maximum line length is 42 characters. DIMENSIONS: 22.62 x 25.74 x 33.93 inches. WEIGHT: 320 pounds.
Braillo 400 S
The Braillo 400 S is a braille printer that can print six and eight dot braille at 400 cells per second. A liquid crystal display indicates the page count. Operator controls include form feed, reset, and paper stop. The printer may be connected directly to a paper cutter. The page lenths and line length are both adjustable; the maximum line length is 42 characters. DIMENSIONS: 48.36 x 26.13 x 39.78 inches. WEIGHT: 530 pounds.
Braillo 400 Sr Embosser
The Braillo 400 SR Embosser is a Braille printer designed for use by persons who are blind or have low vision. The Braillo 400 SR Embosser reduces paper costs because it uses paper rolls up to 40 inches in diameter rather than standard continuous fanfold paper. Paper widths from four to fourteen inches are accepted. Once the paper is brailled, a built-in paper cutter cuts the paper and releases it to the stacker. When the stacker reaches its1000-sheet capacity, a sensor stops the machine so the
Braillo 440 Sw
Braillo 400 SW is a braille printer designed for use by individuals who are blind or have low vision. This printer is designed for large volume production of braille. It prints simultaneously on both sides of the paper at a rate of 440 characters per second continuous printing. It uses standard paper rolls up to one meter in diameter, and can print two or four page sheets with a maximum sheet length of 13 inches. It has a built in paper cutter and a stacking unit for handling large format braill
Dot & Print
Dot & Print is a dual braille / print printing system designed for use by individuals who are blind or have low vision. This printer can produce standard ink print and six-dot braille on alternating lines. It prints at a rate of 50 characteres per second, using Hewlett-Packard inkjet technology for ink print. In addition to braille and print on alternating lines, it can also produce braille alone, standard print alone, and large print alone.
Emfuse Color Braille Station
The EmFuse Color Braille Station is a dual Braille/print printing system designed for use in the production of print and Braille books and documents. This unit can print 1200 x 600 dots per inch (dpi) in full color while embossing up to 400 Braille cells per second (cps). It prints double-sided with ink and Braille, and can emboss Braille in 8 different dot heights for high-resolution tactile graphics. It holds 2,350 pages up to 12x18 inches and can be reloaded while printing. It works with bra
Et Braille Printer
The ET Braille Printer is a desktop interpoint printer designed for printing on both sides of the paper at higher speeds for individuals with visual disabilities. The ET is an improved version of the Juliet (see separate entry) with a 40 character line and a speed of 60 characters per second. It will accept paper weighing from 20 to 100 pounds and prints on either one or both sides of the paper. Other features include high resolution graphics and a multi-copy buffer, which will print a 30 page d
Everest Braille Embosser (Model 70010)
The Everest Braille Embosser, model 70010, is a Braille printer designed for persons who are blind or have low vision. The Everest is a double- and single-sided Braille printer that uses cut sheet card-stock paper of the sort that is available off-the-shelf in office supply stores. Keys are labeled in ink and in Braille, and provide voice confirmation when pressed. The Everest will print Braille with dot distances of 1.6, 2.0, and 2.6 millimeters, and it will print tactile graphics images create
Gemini Braille Printer
The Gemini Braille Printer, also called the Gemini Print and Braille Embosser, is a braille printer designed for use by individuals who are blind or have low vision. This braille printer can print braille and ink print simultaneously on the same page. Ink characters can be printed in a standard size or two or four times larger, and the user can also adjust the shading. Ink characters can be positioned either above or below the braille. Ink characters that can be printed include the major Europea
Impacto-600 Interpoint Braille Embosser
The Impacto-600 is an interpoint (double-sided) Braille printer designed for use by persons who are blind or have low vision. This unit can print high-quality interpoint Braille pages at a rate of 600 pages per hour. The number of working parts has been reduced to a mininum to ensure reliability, and an integrated test function allows quick diagnostic testing. The printer includes permanently installed Braille character sets in several languages, together with a built-in Braille editor that allo
Juliet Pro 60
The Juliet Pro 60 is a desktop braille printer designed for use by individuals who are blind or have low vision. This printer has a 40-character-wide embossing line and 60-characters-per-second speed for double-sided embossing (40-characters per second for single-sided printing). It can use either continuous tractor-feed paper or single sheets, hand-fed one at a time. A variety of different paper sizes and weights can be used. ET Speaks comes up talking automatically on the Juliet Pro 60, echoin
Marathon Brailler
The Marathon Brailler is a desk-top Braille printer designed to provide single-sided embossing for individuals who are blind. The user sets printing control parameters with a built-in keypad (no dip switches). Up to 16 different sets of parameters can be stored in the Marathon's permanent memory. Eight pre-programmed sets for popular microcomputer configurations are provided with the system. Control parameters can be verified via a 32-character visual display or in Braille. When used with Braill
Ohtsuki Bt-5000 Braille/print Printer
The Ohtsuki Printer is a dual braille / print printing system capable of producing parallel lines of braille and standard ink print for individuals who are blind or have low vision. The user sends the printer a grade 1 or grade 2 braille file via a computer's serial or parallel port, and the printer can print only standard ink print (dot matrix), only braille, or both types on alternate lines. The speed of printing is slightly lower when both types are used. Grade 2 braille can also be printed,
Plate Embossing Device (Model Ped-30)
The Plate Embossing Device, model PED-30, is a Braille printer that embosses Interpoint Braille on zinc plates used for press Braille production. These templates are ideal whenever 50 or more copies of a book, document, etc. are required. This machine embosses 45 zinc plates per hour. The machine is available in USA and European Braille standards. CPS: 40 characters per second. POWER: 120 volt AC, 30 amperes maximum 60 hz. DIMENSIONS (WxLxH): 35 x 53 x 59 inches. WEIGHT: 900 pounds.
Porta-Thiel
The Porta-Thiel is a lightweight, portable Braille printer designed for use by persons who are blind or have low vision. The Porta-Thiel prints on single sheets, continuous forms, plastic, and magazine sheets. It does not use a tractor feeder device to control paper feed. A built-in speech synthesizer informs the user when the unit is out of paper, and data are not lost during the paper resupply process. Dots can be adjusted to any paper weight. This printer embosses six- and eight-dot Braille,
Prestobraille Signmaker
The PrestoBraille Signmaker is a braille printer designed to produce Braille books and other documents at high speeds for individuals who are blind. This printer in particular is ideal for large signmakers who need Braille in the shortest form possible, but stamped through very thick materials. The industrial-strength signmaker is powered by compressed air. The message can be up to 30 characters long in the standard Library of Congress template and up to 24 characters long in the optional Califo
Romeo 25
The Romeo 25 is a braille printer designed for individuals who are blind or have low vision. The Romeo 25 is a rugged basic embosser suitable for student, personal, or home office use. It produces a 40-character line of Library of Congress Braille at 25 characters per second. Standard features on Romeo 25 include Dynamic Braille Scaling and a choice of resolution settings for graphics. Dynamic Braille Scaling allows the user to change Braille sizes, even within a document, from Library of Congre
Romeo Pro 50
The Romeo Pro 50 is a Braille printer designed for use by persons who are blind or have low vision. The Romeo Pro 50 looks like the Romeo 25 (see separate entry), but has aditional features and prints twice as fast. The Romeo Pro 50 prints single-sided braille at a rate of 50 characters per second, versus 25 for the Romeo 25. Standard features include ET Speaks, a fast and flexible speech system that comes up automatically and echoes commands as they are entered on the printer's keypad. The unit
Simcheong Braille Printer And Scanner
---- PROTOTYPE --------- PURPOSE: To design a prototype of a scanner/printer that can scan and print documents in Braille for individuals who have low vision or are blind. The SimCheong Printer and Scanner is the result of a Korean fairy tale about a young girl and her blind father and how her sacrifices during her life result in her father's eyes being opened and his ability to see. This printer/scanner sounds like a fairy tale in of itself. This device is a compact printer and scanner that ca
Thomas Braille Embosser
The Thomas Braille Embosser is a braille printer designed for individuals who are blind or have low vision. The Thomas Braille Embosser prints single-sided Braille at a rate of 40 characters per second. Its features include Dynamic Braille Scaling, which allows users to switch with just one command from Library of Congress Braille to California sign Braille, Jumbo Braille, standard Braille with increased line spacing, or the smaller Braille often preferred in Japan. Sizes can be mixed within a s
Tiger Cub Desktop Embosser
The Tiger Cub Desktop Embosser is a braille printer and tactile graphics embosser designed for use by individuals who are blind or have low vision. This embosser can be used for braille production, tactile graphics, braille math with graphics, braille adhesive labels, and braille business cards, and it can emboss braille and graphics together on standard braille paper. Braille can be printed directly from mainstream Windows software like Microsoft Office, or from braille-making software like Dux
Tiger Cub Jr. Personal Embosser
The Tiger Cub Jr. Personal Embosser is a braille printer and tactile graphics embosser designed for use by individuals who are blind or have low vision. This embosser can be used for braille production, tactile graphics, braille math with graphics, braille adhesive labels, and braille business cards, and it can emboss braille and graphics together on standard braille paper. Braille can be printed directly from mainstream Windows software like Microsoft Office, or from braille-making software lik
Tiger Elite 150 Printer
The Tiger Elite 150 Printer is a braille printer designed for use in the production of braille books and documents. Its printing speed is 150 cps (Braille cells per second), with automatic double-sided embossing. The unit is compact with heavy-duty construction for high volume production. The unit comes with the Tiger Software Suite, which can be used for Braille translation from MS Word and tactile graphics design in conjunction with computer graphics software such as Illustrator or CorelDraw.
Tiger Elite 200 Printer
The Tiger Elite 200 Printer is a braille printer designed for use in the production of braille books and documents. Its printing speed is 200 cps (Braille cells per second), with automatic double-sided embossing. The unit is compact with heavy-duty construction for high volume production. The unit comes with the Tiger Software Suite, which can be used for Braille translation from MS Word and tactile graphics design in conjunction with computer graphics software such as Illustrator or CorelDraw.
Tiger Max
Tiger Max is a desktop braille and tactile graphics embosser designed for use by individuals who are blind or have low vision. This embosser can be used for braille production, tactile graphics, braille math with graphics, braille adhesive labels, and business cards. With this printer, braille and graphics can be embossed together on regular braille paper, rather than thermal paper, and braille can be created and embossed directly from mainstream Windows software like MS Office, as well as from
Tiger Premier 100 Braille Printer
The Tiger Premier 100 Braille Printer is a braille printer designed for use in the production of braille books and documents. Its printing speed is 100 cps (Braille cells per second), with automatic double-sided embossing. The unit comes with the Tiger Software Suite, which can be used for Braille translation from Microsoft Word or Excel and for tactile graphics design in conjunction with computer graphics software such as Illustrator or CorelDraw. OPTIONS: Floor stand for printer; Braille paper
Tiger Premier 80 Braille Printer
The Tiger Premier 80 Braille Printer is a braille printer designed for use in the production of braille books and documents. Its printing speed is 80 cps (Braille cells per second), with automatic double-sided embossing. The unit comes with the Tiger Software Suite, which can be used for Braille translation from Microsoft Word or Excel and for tactile graphics design in conjunction with computer graphics software such as Illustrator or CorelDraw. OPTIONS: Floor stand for printer; Braille paper.
Transend Lt
TranSend LT is a dual braille / print printing system designed for individuals who are blind or have low vision. The system can produce braille together with ink text on alternating lines on the same page. Ink text can be either large or small print. The system consists of a control unit, a dot matrix printer, and a braille printer. TranSend uses text files that can be created by most popular word processing programs. The system has a built-in speech synthesizer which speaks all prompts as they
ViewPlus Cub Single-Sided Braille Embosser
The ViewPlus Cub Single-Sided Braille Embosser is designed for persons who are blind or have low vision. The Braille dot can be adjusted in height, allowing to adjust to the individual sensibility of the reader's fingertip. This makes extended Braille reading more enjoyable while maintaining unsurpassed detail in producing tactile graphics. Produces Braille text combined with tactile graphics. Unique feature of tactile graphics is touchable representation of colors through variable dot heights.
ViewPlus EmBraille Single-Sided Braille Embosser
The ViewPlus EmBraille Single-Sided Braille Embosser is a compact and lightweight Braille embosser designe for users who are blind or have low vision. The VP EmBraille can be used in the classroom, at work, or at home. The Braille dot can be adjusted in height, allowing to adjust to the individuals sensibility of the reader's fingertip allowing for extended Braille reading.