Portable Ramp
Results: 80
Access4U Mini Wheelchair Ramps
Access4U Mini Wheelchair Ramps are designed for use to make steps or other rises wheelchair accessible. These lightweight ramps can be used semi-permanently on one to two steps. They have a welded aluminum frame with an aluminum skid-resistant deck. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are available. CAPACITY: 600 pounds.
Access4U Portable Folding Ramp
The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds.
Alumilite Folding Curb Ramp
The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60
Aluminium Threshold Ramp
The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.
Aluminum Modular Ramp
The Aluminum Modular Ramp is a portable modular ramp designed for use by individuals with mobility disabilities. This all-aluminum ramp system provides wheelchair access to homes or businesses. The system can be assembled with little or no site preparation, and the modular components can be reconfigured or disassembled and moved to a new location. Components include straight ramps, 45 degree turns, 90 degree turns, and 180 degree switchbacks . DIMENSIONS: The ramps are 36 inches wide. All modul
Aluminum Portable Wheelchair Ramp
The Aluminum Portable Wheelchair Ramp is a folding aluminum ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a non-slip, raised button surface for traction and safety. It folds in the center and has a handle for carrying. OPTIONS: Wheel kit for rolling transport and removable hinge pins allowing the ramp to separate into two sections. DIMENSIONS: Ramps are available in 5, 6, 7, 8, 10, or 12 feet lengths. All ramps are 30 inches wide. Custom dime
Aqua Ramp
The Aqua Ramp is a portable swimming pool ramp designed to provide swimming pool access for wheelchair users and others who have difficulty using a ladder or steps. This lightweight aluminum ramp has non-skid surfaces, and it is wide enough for most aquatic wheelchairs. It automatically adjusts with movable floor systems. The ramp includes a lower platform. DIMENSIONS (LxW): 12 x 3 feet; lower platform is 3 feet long. WEIGHT: 250 pounds. WARRANTY: 5 year structural warranty.
Bariatric Multifold Portable Ramp (Models Bar536, Bar636, Bar736, & Bar836)
The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (m
Butt Ramp
The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end
Carlite Series Ramp
The Carlite Series Ramp is a portable ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from aluminum, the ramp has an anti-slip tread with safety curbs on the sides. DIMENSIONS: Standard lengths are 1 to 6 feet and standard widths are 30 to 36 inches. Custom sizes are available.
Curb Ramp
The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS
Decpac Multipurpose Ramp (Model Mp44)
The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked
Decpac Multipurpose Ramp (Model Mp55)
The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th
Decpac Multipurpose Ramp (Model Mp66)
The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the
Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb44 )
The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad
Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb55)
The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge
Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb66)
The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th
Decpac Personal Mini Ramp (Model Mp24)
The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g
Decpac Personal Standard Ramp (Model Mp210)
The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick,
Diy Portable Wheelchair Ramps
--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself (DIY) portable wheelchair ramp for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair to enter or exit to houses, shops or other locations. An individual had used store-bought ramps made of aluminum and found they did not work well and were expensive. Step 1: Calculating the ramp length - The Americans with Disabilities Act Accessibility Guidelines (ADAAG) recommend
Ez-Access Rollup Ramp
The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 in
Ez-Access Rubber Threshold Ramp (Models Thr 250-1 & Thr Riser 225-1 Pr)
The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x
Ez-Access Rubber Threshold Ramp With Beveled Sides (Models Thrw36 150-1)
The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides
Ez-Access Suitcase Advantage Series Ramp (Models As2, As3, As4, As5 & As6)
The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS
Ez-Access Suitcase Ramp (Models 2, 3, 4, 5 & 6)
The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches
Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)
The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe
Ez-Access Transitions Modular Entry Ramp
Ez-Access Aluminum Threshold Ramp is ideal for doorways to create a smooth and strong entry and exit. It is made up with high-strength aluminum that never rusts or corrodes and features an extruded slip-resistant surface to increase safety. Transition Modular Entry Ramp can be used for doorways, raised landings and sliding glass doors. This Ramp proves to be practical for sliding glass doors as it does not interfere with the door track. It is lightweight and easily transported from one place to
Flex-Ramp
The Flex-Ramp is a van ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp converts a mini-van or full-size van into a wheelchair-accessible vehicle. The ramp is attached to the floor of the vehicle and extended outward when the door is opened. It can also be detached from the floor and moved to another location such as a curb or steps. OPTIONS: Two wheel cart for transporting ramp. SIZES: Mini-van, full-sized van, or extra capacity. DIMENSIONS (LxW):
Fold-A-Way Ramp (Model D-Far-120)
The Fold-A-Way Ramp, model D-FAR-120, is a pair of folding tracks designed for use by individuals with in wheelchairs. Tracks have a slip-resistant surface for traction. Each ramp track comes with two handles for positioning and can be folded for storage. DIMENSIONS (HxLxW): Each track is 4.25 x 120 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 77 pounds per pair.
Folding Aluminum Ramp
The Folding Aluminum Ramp is an accessible folding ramp designed for use by individuals who use wheelchairs or scooters. Made of anodized aluminum, this ramp is trimmed at the edges with a coarse finish strip to the side to prevent slippage. The build up of ice is prevented by treads that are slotted to facilitate drainage. This ramp comes with a handle and locks and can be stored in the back of a car. DIMENSIONS: Available is 3 inches, 4 inches, and 5 inches.
Folding Ramp
The Folding Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over vertical barriers. The ramp is made of aluminum with an anti-slip tread surface and safety curbs. It folds for carrying or storage. DIMENSIONS: Standard lengths is 3 to 6 feet, and standard width is 30 inches. Custom sizes are available. WARRANTY: 10 years.
Freedom Ramp
The Freedom Ramp is a portable modular ramp designed for use by individuals with mobility disabilities. The ramp is designed to be easily configured and installed. Freedom Ramp Systems usually do not require footings and do not attach to the structure, which can help streamline the permitting and installation process and allow for easy removal when they are no longer needed.
Handiramp Singlefold Ramp (Models Asf 2, Asf 3, Asf 4, & Asf 5)
The HandiRamp Singlefold Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made from durable welded aluminum, the ramp folds in half and can be carried like a suitcase. Its full platform has an anti-slip, high-traction surface, and can accommodate wheelchairs and scooters with various wheel configurations. DIMENSIONS (LxW): 2, 3, 4, or 5 feet x 30 inches. When folded, the ramp is 24 x 16 x 4 inches (model ASF 2), 36 x 16 x 4 inches (model A
Horse Mounting Ramp
The Handi-Ramp Portable Horse Mounting Ramp is designed for users with mobility or walking disabilities. The device was developed to be a safe and effective way to allow users with mobility issues to mount a horse. The ramp is an aluminum mounting ramp and can be stored in pieces and transported in the back of a pickup truck. Assembly can take up to 2 to 3 minutes for two people without the need of any special tool.
Invacare Ramps (Models Icr630 & Icr330)
The Invacare Ramps are suitcase-style portable ramps designed for use with manual and power wheelchairs and three- and four-wheel scooters. Both models fold and feature a slide-on clip and carrying handle for secure storageand transport. Model ICR330 is a single-fold model and model ICR630 is a multi-fold model. High traction tape on the surface of both models is long-lasting and maintenance-free. DIMENSIONS: Open, model ICR630 is 6 feet long x 30 inches wide and model ICR330 is 3 feet long x 3
Literamp Portable 1-Piece Wheelchair Ramp
The LiteRamp Portable 1-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a wheelchair or scooter. The ramp has carrying handles, folds in the middle, and can be carried like a suitcase. It is made from aircraft aluminum, and it is fully covered with safety non-skid tape. This ramp is weather resistant so it can be left outdoor year-round. It is self-supporting to prevent slippage on sta
Literamp Portable 2-Piece Wheelchair Ramp
The LiteRamp Portable 2-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp can be taken apart into two separate pieces side by side. Each piece folds length-wise and has two handles so it can be carried like a suitcase. The ramp can accommodate 3-wheel scooters as well as manual or electric wheelchairs. It can be used on curbs, decks, and steps; on side doors of vans; on back doors of most vans an
Multi-Fold Portable Ramp (Models Amf 5, Amf 6, Amf 7, Amf 8, Amf 10, & Amf 12)
The Multifold Portable Ramp is a portable wheelchair ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp can be carried like a suitcase. Made from welded aluminum, it has a full platform with an anti-slip high traction surface. For transport, the ramp separates into two pieces that fold in half, and the panels are locked together with a closure strap. DIMENSIONS (HxLxW): 10 x 60 x 30 inches in use, 9 x 32.25 x 16 inches folded (model AMF 5); 12 x 72 x
Multifold Ramp (Models Wcr530, Wcr630, Wcr730, Wcr830, Wcr1030, & Wcr1230)
The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR123
National Ramp Pathway Ramp
The National Ramp Pathway Ramp is a portable ramp designed for use by individuals with mobility or walking disabilities. This ramp provides temporary or semi-permanent home access for use with scooters, wheelchairs and walkers. Made of welded aircraft-grade aluminum, it is strong but lightweight and portable. It has a skid-resistant surface and a self-adjusting bottom transition plate for conversion from ramp to ground.
National Ramp Pathway Ramp With Rail
The National Ramp Pathway Ramp with Rails is a portable ramp designed for use by individuals with balance, mobility, or walking disabilities. Made of aluminum with an extruded non-skid surface, it can be used outdoors in all weather conditions, and can be moved or relocated. Numerous widths, lengths, and handrail options are available.
National Ramp Threshold Ramp (Aluminum)
The National Ramp Aluminum Threshold Ramp is a portable, modular ramp designed for use to make thresholds acccessible to wheelchair, walker, and cane users. This lightweight, durable, free-standing ramp can be placed indoors or outdoors in front of doorways, sliding glass doors, and raised landings. Made of anodized aluminum, the ramp is seam-free. The modular design with its interchangeable components accommodates thresholds from 0.75 to 6 inches high. DIMENSIONS: 34 inches wide.
National Ramp Threshold Ramp (Rubber Wedge)
The National Ramp Rubber Wedge Threshold Ramp is a portable ramp designed for use to make thresholds accessible to wheelchair users. The wedge is placed against the door threshold, either inside or outside, to provide a smooth ground-to-sill transition. Made of recycled tires, the ramp is slip resistant and portable. The ramp can be trimmed for lower heights and widths or combined to reach greater heights. For wider entrances, two ramps can be placed side by side. DIMENSIONS: 48 inches wide.
National Ramp Threshold Ramp (Rubber)
The National Ramp Rubber Threshold Ramp is a ramp designed for use to make thresholds accessible to wheelchair users. Placed in front of a door, it provides a smooth ground-to-sill transition. Made of 100 percent recycled materials, this portable indoor/outdoor ramp is slip-resistant and can be used on any surface. It can be trimmed or notched for a custom fit, and can be moved to any location. It does not interfere with door tracts, so it can be used with sliding glass doors. DIMENSIONS: 36 in
Pathway Lite (Models As2, As3, As4, As5, As6, As7 & As8)
The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (mod
Pediatric Suitcase Ramp (Models Ap 7055 & Ap 7056)
The Pediatric Suitcase Ramp is a portable ramp designed for use by children with mobility disabilities, neurological disabilities, severe physical disabilities, or spinal cord injury. This portable ramp accommodates pediatric scooters, walkers, and wheelchairs. The ramp is hinged and folds in half to be carried like a suitcase. Made of aluminum, the ramp has a durable, non-skid surfaceand a built-in carrying handle. CAPACITY: 600 pounds. DIMENSIONS (LxW): Model AP 7055 is 5 x 2 feet and model A
Portable Curb Ramp
The Portable Curb Ramp is a protable ramp designed for wheelchair and rollator users. The ramps allows users to roll up to curbs or steps up to 5.5 inches high. Made of durable plastic, and features mounting holes on sides and bottom. There is possibility of attaching two units together.
Portable Perfolite Fixed Ramp (Models V5, V10 & E1)
The Portable Perfolite Fixed Ramp, models V5, V10 and E1, is a portable two-piece curb ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece tracks and includes a carrying handle. DIMENSIONS (LxW): 21.75 x 8.25 inches (V5); 45.75 x 8.25 inches (V10); or 41.75 x 10.5 inches. CAPACITY: 880 pounds per pair. WEIGHT: 3.5 pounds per ramp (V5); 7 pounds
Portable Perfolite Folding Ramp (Model V11, V15, C20, 110 U & 200 U)
The Portable Perfolite Folding Ramp, models V11, V15, V20, 110 U and 200 U, is a two-piece folding track designed for use to provide access for wheelchair users, including individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. Ramps are sold in pairs. Models V15, V20, 110 U and 200 U have variable lengths. Models V11, V15, and V20 have carrying handles. Models V11 and 1
Portable Perfolite Folding Telescopic Ramp (Models E2/3 & V30)
The Portable Perfolite Folding Telescopic Ramp, models E2/3 and V30, is a portable folding telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of folding, telescoping tracks and includes a carrying handle. Model E2/3 is recommended for 2 steps, and model V30 is recommended for 3 steps. DIMENSIONS (LxW): 30.25 to 82.5 x 9.75 inches (E2/3);
Portable Perfolite Telescopic Ramp (Models U2, U2/3, & U3)
The Portable Perfolite Telescopic Ramp, models U2, U2/3, and U3, is a portable telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece, telescoping tracks and includes a carrying handle. Models U2 and U3 are recommended for curbs and stoops; model U2/3 is recommended for 2 steps. DIMENSIONS (LxW): 45.75 to 91.5 x 7.5 inches (U
Pride Silverstar Single Fold Ramp
The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.
Pvi Bariatric Multifold Ramp (Models Bar536, Bar636, Bar736, & Bar836)
The PVI Bariatric Multifold Ramp, models BAR536, BAR636, BAR736, and BAR836, is a portable ramp designed for use by individuals with mobility disabilities. This ramp separates into two pieces that fold on a center joint hinge. A closure strap locks the ramp panels together, allowing it to be carried like a suitcase. The ramp has an anti-slip high traction surface and durable welded construction. It accomodates wheelchairs and scooters with various wheel configurations. A safety guide indicates i
Pvi Multifold Ramp With Extended Lip (Models Utw630, Utw730, Utw830, & Utw1030)
The PVI Multifold Ramp With Extended Lip, models UTW630, UTW730, UTW830, and UTW1030 (also known as the PVI Utility Ramp), is a portable van ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This folding ramp has an extended hook so that the top of the ramp clears the rear bumper. It separates into two pieces for folding and transport, and it is carried like a suitcase. The ramp has welded construction with an anti-slip, high traction surfa
Ramp Threshold - Ada (Models 234A, 235A, & 236A)
The Ramp Threshold - ADA, models 234A, 235A, and 236A, is an accessible threshold ramp designed for use with thresholds that are too high for easy wheelchair access. The ramp is constructed of extruded aluminum. DIMENSIONS (HxL): 0.5 x 3 inches (234A), 0.25 x 3 inches (235A), or 0.5 x 3.94 inches (236A).
Rampit Aluminum Ramp
The Rampit Aluminum Ramp is a portable ramp designed for semi-permanent indoor or outdoor use to provide access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from commercial grade aluminum with stainless steel nuts and bolts, the ramp is lightweight and portable and has a no-slip surface. It has an extension for attaching to a threshold or porch. This ramp also has a swiveling bevel for smooth transition to its ground lip extension. With a platform (no
Roll-A-Ramp
Roll-A-Ramp is a portable ramp designed to provide wheelchair and scooter access to homes, buildings, or vans. Made of anodized aerospace aluminum, these ramps are available in a two-track style or in a single wider ramp to accommodate scooters and powered wheelchairs and feature built-in side rails for safety. The width is adjustable to accommodate a variety of wheelchairs and scooters. Each lightweight section rolls up or folds for transport and storage and includes a carrying strap/handle. Th
Roll-O-Ramp With Wheels (Model D-Rol-48)
Roll-O-Ramp With Wheels, model D-ROL-48, is a portable curb ramp designed for use by individuals in wheelchairs. This ramp has wheels for portabililty. Its beveled edges create a smooth transition between the ramp and the ground or sidewalk. DIMENSIONS (LxW): 48 x 36 inches. CAPACITY: 500 pounds. WEIGHT: 97 pounds.
Safespan Telescoping Ramp (Model D-Tr-88)
The Safespan Telescoping Ramp, model D-TR-88, is a pair of telescoping tracks designed to provide access for wheelchair users. Tracks are made using a lightweight aluminum extrusion. The top surface is serrated for positive traction. Each track has one carrying handle. DIMENSIONS (LxW): 88 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 65 pounds per pair.
Scg Series Mobility And Equipment Loading Ramp (Models Scg-2, Scg-3, Scg-4, Scg-5 & Scg-6)
The SCG Series Mobility and Equipment loading ramp, models SCG-2, SCG-3, SCG-4, SCG-5 and SCG-6, is a portable folding ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can be used to enable a wheelchair or scooter user to get into a vehicle or over steps. The ramp has a full width platform for stability and a built-in serrated surface for traction. The platform folds in half lengthwise for storage, and models SCG-3, SCG-4, SCG-5
Simplicity Wheelchair Lift Ramp
The Simplicity Wheelchair Lift Ramp is an exterior wheelchair lift and ramp designed for use by individuals with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury and others who use wheelchairs. When not in use, the unit acts as a ramp to facilitate entry and exit from a doorway that is 12 to 24 inches above the ground. To enter the doorway, the user wheels onto the ramp and applies the wheelchair's brakes. When the device is activated, it raises the
Single Fold Ramp With Carry Bag (Models Stds1093, Stds1094, Stds1095, Stds1096, & Stds1097)
The Single Fold Ramp with Carry Bag, models STDS1093, STDS1094, STDS1095, STDS1096 and STDS1097, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp enables the user to transition a wheelchair or scooter from one surface height to another. The unit is durable and lightweight , and it comes with a carry bag. Perforated slots keep water from collecting on the ramp. OPTIONS: Additional carrying bag. DIMENSIONS (LxW): 24 x
Singlefold Ramp (Models Sfw230, Sfw330, Sfw430, Sfw530, Sfw630, Sfw730 & Sfw830)
The Singlefold Ramp, models SFW230, SFW330, SFW430, SFW530, SFW630, SFW730 and SFW830, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This lightweight welded ramp folds In half, and all models except the SFW230 have a handle for carrying like a suitcase. The ramp has a full platform with an anti-slip, high traction surface that accommodates wheelchairs and scooters with a variety wheel configurations. A steel security pins and a safety DVD ar
Solid Ramp
The Solid Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over smaller elevation changes and has a rigid design for a solid feel. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 3-, 4-, 5-, 6-, and 7-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 3-foot model weighs 24 pounds, the 4-foot model weighs 32 pounds, the 5-foot model weighs 40 poun
Solid-Fold Ramp
The Solid-Fold Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over larger elevation changes and offers width-wise folding for ease in transportation. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 7-, 8-, 9-, 10-, and 12-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 7-foot model weighs 64 pounds, the 8-foot model weighs 72 pounds, the 9-fo
Stepless Easyfold Pro Ramp (Models 30080-095, 30080-120, 30080-150, 30080-180 & 30080-210)
The Stepless EasyFold Pro Ramp, models 30080-095, 30080-120, 30080-150, 30080-180 and 30080-210, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rollin
Stepless Easyfold Pro3 Ramp (Model 30080-165)
The Stepless EasyFold Pro3 Ramp, model 30080-165, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded lengthwise into thirds for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each t
Stepless Easyfold Ramp (Models 30060-090, 30060-120, 30060-150 & 30060-180)
The Stepless EasyFold Ramp, models 30060-090, 30060-120, 30060-150 and 30060-180, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This single-fold ramp can be folded and carried with the attached carrying handles or stored. When unfolded, the ramp provides a solid non-skid surface. The ramp can be positioned and removed as needed to overcome minor height differences. Models 30060-1
Stepless Easyfold Telescopic Ramp (Models 30070-180, 30070-210, 30070-240, & 30070-300)
The Stepless EasyFold Telescopic Ramp, models 30070-180, 30070-210, 30070-240 and 30070-300 is a portable ramp and van ramp designed to provide wheelchair or scooter access to structures and vans for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The length of the ramp is adjustable so it can be used to provide access between two surfaces with a variety of height differences. The telescopic function prevents finger pinching
Stepless Folding Ramp (Models 30020-110, 30020-160, 30020-210, 30020-260, & 30020-310)
The Stepless Folding Ramp, models 30020-110, 30020-160, 30020-210, 30020-260, and 30020-310, is a two-track portable ramp designed to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each track. This ramp has impact-proof, non-skid
Stepless Lite Ramp (Models 30100-070, 30100-085, 30100-125, 30100-165 & 30100-205)
The Stepless Lite Ramp, models 30100-070, 30100-085, 30100-125, 30100-165, and 30100-205, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of glass and graphite fiber, the Stepless Lite Ramp is lightweight and folds lengthwise for transport and storage. It has a non-skid surface with a raised edge on each side, and a carry handle on one side for transporting the ramp when folded. It can be used by passengers on public transport, including
Stepless Plain Ramp (Models 30000-050, 30000-105, 30000-130, 30000-155, & 30000-200)
The Stepless Plain Ramp, models 30000-050, 30000-105, 30000-130, 30000-155, and 30000-200, is a two-track portable ramp designed for use to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. Each ramp also has curbs on both sides to prevent the user from rolling off the side of the ramp. Both ramp tr
Stepless Telescopic Ramp (Models 30015-100, 30015-150, 30015-200, 30015-250 & 30015-300)
The Stepless Telescopic Ramp, models 30015-100, 30015-150, 30015-200, 30015-250 and 30015-300, is a two-track portable telescoping ramp to accommodate manual and electric wheelchairs for use with steps and curbs and to enter or exit vans. Made of aluminum with a non-skid surface, each track has raise edges on each side and a handle on one side. The edges have soft rubber ends to help hold the track in place. DIMENSIONS: The length of each track extended / collapsed is - 39.125 / 26.5 inches (mod
Stepless Wide Folding Ramp (Models 30040-150, 30040-200, 30040-250, & 30040-300)
The Stepless Wide Folding Ramp, models 30040-150, 30040-200, 30040-250 and 30040-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the same place. T
Stepless Wide Plain Ramp (Models 30030-100, 30030-125, 30030-150, 30030-200, & 30030-300)
The Stepless Wide Plain Ramp, models 30030-100, 30030-125, 30030-150, 30030-200, and 30030-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the sam
Suitcase Ramp (Model Ramp-Sf)
The Suitcase Ramp, model RAMP-SF, is a folding portable ramp designed for use by individuals who use wheelchairs. The ramp's surface has a serrated grip with debris slots. The ramp folds for transportation. DIMENSIONS (LxW): 72 x 28 inches. CAPACITY: 500 pounds. WEIGHT: 33 pounds.
Suitcase Ramps
The Suitcase Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair or scooter access over curbs, steps, and doorways. The ramp accomodates wheelchairs and scooters with various wheel configurations. To operate, the hinged ramp is unfolded and positioned for maximum safety and support. Its single-fold design allows it to be folded in half lengthwise to be carried like a suitcase when not in use. The ramp includes a
Suitcase Ramps
Suitcase Ramps are portable ramps designed for use by individuals with mobility disabilities. These hinged tracks have a non-skid surface and cover gaps, curbs, and steps. A nylon carrying case is included. DIMENSIONS: All models are 30 inches wide. These ramps are available in 3, 4, or 5 foot lengths. WEIGHT: The 3 foot model weighs 15 pounds, the 4 foot model weighs 21 pounds, and the 5 foot model weighs 26 pounds.
Travel Ramp (Models 803, 804, & 805)
The Travel Ramp, models 803, 804, and 805, is a portable ramp made of lightweight fiberglass. It accommodates scooters, power chairs and folding wheelchairs. DIMENSIONS (LxW): 36 x 31 inches outside, 28 inches inside (803;, 48 x 32 inches outside, 29 inches inside (804); 60 x 30 inches outside, 27 inches inside (805). WEIGHT: 15 (803), 20 (804), or 25 (805) pounds. capacity: 600 POUNDS.
Wood Modular Ramp
The Wood Modular Ramp is a portable modular ramp system designed for use by individuals with mobility disabilities. The components of this ramp system can be disassembled and reused if necessary. Ramp sections can be added on or removed as needed. They are not permanent structures. The ramp surface is skid-resistant Tuf-Tred. The railings are constructed of long-lasting cedar. DIMENSIONS: The ramps are 36 inches wide; custom widths up to 48 inches are available. All modules have curbing that is