Wedge Foam Seat Cushion
6915 Anti Thrust Cushion
The 6915 Anti Thrust Cushion is a wedge foam seat cushion designed to aid individuals who are prone toward slipping down into their seat. The cushion can be used in classroom chairs, wheelchairs, kitchen chairs, etc. Two snaps are attached to the rear of the cushion for fastening to the seating unit. The wedge is vinyl covered and washable. SIZES: Small, Medium, and Large. DIMENSIONS: Available in 14, 16, or 18 inches square (respective to sizes); all sizes are 3.5 inches in front tapering to 1
Alimed Sit-Straight Basic Cushion
The Sit-Straight Basic Cushion is a high density foam seat cushion with a convex base designed for use in wheelchairs with sling seats. Intended to improve sitting posture and weight distribution, this cushion is a combination of the Solid Seat Insert (see separate entry) and a wedge cushion. The wedge is intended to encourage modified anterior pelvic tilt. A No-Slip waterproof cover with front zipper is standard with the cushion, and protects against liquid infiltration. Attached straps secure
Anti-Decubitus Gel Sit-Straight Cushion
The Anti-decubitus Gel Sit-Straight Cushion is a foam seat cushion designed to fight excessive pressure and pressure sores by encouraging better posture and more uniform weight distribution. The cushion is made of fire-retardant T-Foam (see separate entry), a pressure relieving, flotation-like foam material that molds and effectively increases the weight bearing area to reduce pressure, and high density foam wedge tapered on the distal edge to relieve pressure on the thighs. A No-slip incontinen
Basic Wedge Cushion
The Basic Wedge Cushion is a seat cushion made of high density foam designed to not flatten out under the user's weight. The wedge shape is intended to encourage a modified anterior pelvic tilt that results in upright sitting posture and discourages slipping forward in the chair. This cushion may be used in Geri chairs or wheelchairs. A No-Slip, water resistant cover is included. DIMENSIONS: 16 x 18 inches (no. 260), 16 x 16 inches (no. 261), or 14 x 14 inches (no. 1287). Thickness tapers from 3
Deluxe Seat Solution
The Deluxe Seat Solution is a foam seat cushion designed for use by individuals at risk for pressure sores/ulcers or who need support while seated. This cushion has an orthopedic wedge-shaped design that tilts lower back forward to restore a natural spinal curve, while a cut-away section relieves pressure on the tailbone and spine. This high-density poly/foam cushion has breathable fabric on one side and is wipe-clean and water-resistant on the other. The cushion has a built-in carrying handle.
Deluxe Wedge Cushion (Model 6535)
The Deluxe Wedge Cushion, model 6535, is a wedge foam seat cushion designed for use in wheelchairs. Made of firm, high-density foam, this cushion gently rotates the hips back to prevent forward sliding. Covered in water-repellant, wipe-clean, non-slip vinyl, the cushion has a convex bottom to provide a stable foundation and prevent seat hammocking. DIMENSIONS (WxD): 18 x 16 inches. The cushion tapers from 4 inches high in the front to 2 inches high in the back.
Foam Mattress Wedge (Models 8026Ac, 8027Ac, & 8028Ac)
The Foam Mattress Wedge is a wedge foam seat cushion designed for head, back, foot or leg elevation. The wedge is non-allergenic and covered with non-plasticized, water-repellent A.C.A. Hospital ticking. DIMENSIONS: 26 x 24 inches, 7 1/2, 10 1/2 or 12 1/2 inches high.
Gaymar Sof Care Chair Cushion
The Gaymar Sof Care Chair Cushion is designed for use by individuals at risk for pressure sores or ulcers. The cushion helps prevent pressure ulcers by managing pressure redistribution through three layer air channeling technology. The air in the cushion provides unique support by elevating the body's sensitive pressure points off the surface of the chair and redistributes the user's weight over the surface of the cushion thereby reducing tissue interface pressure. The cushion comes pre-inflated
Kabooti Donut Coccyx Cushion
The Kabooti Donut Coccyx Cushion is a foam ring seat cushion and wedge cushion designed to provide coccyx pressure relief for people with lower extremity or mobility disabilities, spinal cord injury, and others who use wheelchairs or sit for long periods. The Kabooti Cushion provides all of the seating comfort of a ring shaped cushion, coccyx cushion, and traditional seating wedge. Constructed of one-piece molded support foam, this cushion has lobes that improve seating balance. A large center o
The Komfort Kush is wedge foam seat cushion with a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. This cushion slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It is constructed of high density poly foam with an ultra-suede cover that is removable for easy cleanup. It has a non-slip bottom and a carrying handle for eas
Profile Sitting Orthosis
The Profile Sitting Orthosis is a wedge foam seat cushion designed to minimize ischial tuberosity pressure. The construction encourages modified anterior pelvic tilt and, consequently, an upright sitting posture, and reduces slouching that can result from using a sling seat style wheelchair without modification. Ischial pressure is relieved by contouring and shaping the rear of the cushion. A pressure distributing layer of T-Foam (see separate entry) interfaces between the shaped cushion and the
Saddle Cushion, The
The Saddle Cushions are foam, wedge foam, or foam and gel seat cushions designed for use in wheelchairs. Available with or without QuadraGel, these cushions are available in a wedge model that is lower in the back than in the front to prevent the user from sliding or thrusting forward, or in a Zero Elevation model that is the same height throughout. The cushions also feature rounded bottoms to prevent hammocking. The cushions have two layers of HR foam for comfort and a firm bottom layer for sup
Sammons Preston Economy Wedge Cushion (Model 6485)
The Sammons Preston Economy Wedge Cushion, model 6485, is a foam cushion designed for use by individuals at risk for pressure sores/ulcers or who are prone to sliding out of their wheelchair or other chairs. This cushion can be positioned with high part in front to prevent sliding, or in back to assist persons with difficulty rising. DIMENSIONS: The 16.5 inch square cushion slopes from 4.5 to .75 inches.
Molded polyurethane foam cushion with contoured wedge shape. Handsewn cover in blue or gray velour fabric.
Softspot Seat Cushion (Model 7152Bl)
The SoftSpot Seat Cushion, model 7152BL, is a foam seat cushion designed for use by individuals to reduce pressure from sitting. The cushion's Therasoft polyurethane foam and softly curved edges distribute weight evenly and help to minimize pressure points. The cushion supports the lower back and spine helping to reduce strain and fatigue. Cut-away contours slope away from pressure points at the coccyx (tailbone), and the cushion's wedge shape helps promote proper seating posture to maintain the
Supportpro Wedge Cushion
The SupportPro Wedge Cushion is a wedge foam or foam and gel seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion is lower in the back than in the front to prevent the user from sliding or thrusting forward. The cushion also features a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer uti
The Wedge Ease is wedge foam seat cushion that slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It has a removable insert in that when removed, forms a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. It is constructed of poly foam and memory foam with a cover that is removable and washable. It has a non-slip bottom. DIM
Wedge Foam Cushion (Models 6520, 6520B, & 6520L)
The Wedge Foam Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion gently rotates the hips back to prevent forward sliding. The Staph-Chek cover wipes clean. DIMENSIONS: Models 6520 and 6520B are 18 inches wide and model 6520L is 20 inches wide. The cushion tapers from 4 inches high in the front to 2 inches high in the back. COLOR: Model 6520 and 6520L have two-color pink and blue covers and model 6520B is blue.
Wedge Pommel Cushion (Models 6522P & 6522L)
The Wedge Pommel Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion features a pommel, promotes hip abduction and proper knee alignment, and the wedge design prevents forward sliding. The convex bottom provides a stable foundation and eliminates seat hammocking. The cushion is covered in water-repellent non-slip vinyl. DIMENSIONS: Model 6522P is 18 inches wide and model 6522L is 20 inchesw wide.
Wedged Cushions (Models N2001 & N2002)
The Wedged Cushions are wedge foam seat cushions designed for use in wheelchairs. These cushions taper toward the back to prevent the user from sliding forward in the chair. The cushions have a removable zippered cover. DIMENSIONS: Model N2001 is 3 x 16 x 18 x 1.5 inches and model N2002 is 4 x 16 x 18 x 1.5 inches. COLOR: The cover is navy.
Wheelchair Cushion - Foam Wedge
The Wheelchair Cushion-Foam Wedge is a wedge foam seat cushion designed for use in wheelchairs. This urethane foam cushion positions the user toward back of the wheelchair without restraints and inhibits sliding or slumping. The cushion is available with a choice of a plaid fabric or a rip-stop nylon cover with or without ties. DIMENSION: 16 x 16 inches or 16 x 18 inches, both with a choice of 3- or 4-inch thicknesses tapering to 1 inch thick.
Wheelchair Wedge Cushion (Model H76670)
The Wheelchair Wedge Cushion, model H76670, is designed for placement in a wheelchair with the high edge forward to prevent the user from sliding off. In a reversed position, the high edge in the back assists rising. Ties at all four corners secure the cushion to the wheelchair frame. The polyurethane foam cushion has a denim cover with a zipper for removal and laundering. DIMENSIONS: 16.5 x 16.5 x 4.5 inches.
Foam wedge. Approximately 6 inches long, 16 inches wide and 2 inches high. May be used in pairs, high sides to front and back, to prevent person from sliding out of chair.