Zipper Aid (Model H73889)
The Zipper Aid, model H73889, is a long handled zipper pull designed to assist individuals with back clothing zippers. The wooden stick has a plastic crosspies handle and a Z-shaped hook for for catching zipper pull tabs. Twenty small rings are supplied for attaching to zipper tabs. DIMENSIONS: Stick is 20 inches long.
Pantyhose Aid (Model F73853)
The Pantyhose Aid, model F73853, is designed to assist individuals to put on pantyhose without bending over excessively. The device consists of three cloth pulling straps that attach to the hose by garter clips. Two flexible plastic sheets hold the pantyhose open as they are pulled over the feet. After guiding the pantyhose onto the feet, the plastic sheets are slipped out and the pantyhose is pulled on the rest of the way by straps.
Dressing Sticks With Garter Clips (Model F73879)
The Dressing Sticks with Garter Clips, model F73879, are designed to assist individuals to dress without excessive bending over, or raising their legs. The pair of long handled wooden sticks have cloth tape extensions with garter clips for pulling slips, skirts, and other clothing into place. DIMENSIONS: 20 inches long.
Bed Rope Ladder (Model H764470000)
The Bed Rope Ladder, Model H764470000, is designed to assist individuals to pull themselves upright in bed. The ladder consists of five rungs, each made of rigid plastic, strung at 5-inch intervals along a polypropylene rope. Rungs have smooth plastic end caps, and the rope is looped at the end.
Rectangular Reader (Model H73363)
The Rectangular Reader, model H73363, is a hand-held magnifying lens with a plastic frame and handle. The lens provides a 10-inch focal length, 4 diopters. DIMENSIONS: 2 x 4 inch lens. WEIGHT: 6 ounces.
Page Turner (Model F73216)
The Page Turner, model 73216, is designed to allow persons with limited dexterity to flip pages without using the fingers. This polystyrene plastic baton with palmar clip has a wide, rubber foam tip. DIMENSIONS: 11 x 1 1/8 inches.
Pencil Holder (Model H73513)
The Pencil Holder, model H73513, is a plastic cuff designed to fit around the hand to hold a pencil or pen, assisting individuals with limited manual dexterity or strength. The device consists of a polycarbonate strip with a split tube pencil grip attached to the molded polystryrene hand clip by a flexible vinyl sleeve. DIMENSIONS: Length adjustable from 6 to 7 inches.
Fabian Writing / Reading Aid (Model H73500)
The Fabian Writing/Reading Aid, model H73500, is an overhead bookholder and writing board designed to allow individuals confined to a bed in a supine position to read and write. The unit consists of a vertical support bar which attaches to the headboard of the bed with padded clamps (included), or to the wall with screws. The overhead fixture swings horizontally to any desired position, and supports the easel which adjusts to a wide range of angles. The metal parts are chrome-plated steel, and t
Scooper Dish With Non-Skid Foam Base
The Scooper Dish with Non-Skid Foam Base is a scoop dish designed for children and adults with limited muscle control in the upper extremities or the use of only one hand. The contoured lip can be used to push the food onto cutlery without it spilling out of the dish. The bottom of the dish has a non-skid base to keep it in place.
Adjustable Shower Seat With Arms And Back
The Adjustable Shower Seat with Arms and Back is designed for use by individuals with balance and lower extremity disabilities. The shower seat has removable back and arms and features height-adjustable legs, suction feet, and a built-in hand held shower spray holder. DIMENSIONS: The width between the arms is 17.5 inches and the legs adjust from 16 inches to 21 inches in 1- inch increments. CAPACITY: 300 pounds.
Scooper Plate With Suction Cup Base
The Scooper Plate with Suction Cup Base is a scoop dish designed for us by children and adults with limited upper extremity muscle control or the use of only one hand. The high rim and reverse curve aid in scooping food onto a utensil without spilling. The bottom of the dish has a rubber suction base to prevent skidding and keeps the plate in place. DIMENSIONS: 6.75 inches in diameter
Pediatric Keep-Warm Dish
The ABLEWARE Pediatric Keep-Warm Dish is a food warmer dish designed for use by children who need additional time to finish a meal due to upper extremity or fine motor disabilities, as well as swallowing and eating disabilities. An inside chamber is filled with hot water to keep food warm; a plastic funnel is included to aid in filling the chamber. The plastic bowl holds six fluid ounces and is top-rack dishwasher safe. DIMENSIONS (H x Diameter): 2.25 x 5.25 inches. WEIGHT: 0.175 pounds when
Roll Easy Lotion Applicator
The Roll Easy Lotion Applicator is designed for use by individuals with impaired upper extremity strength and/or range of motion. The lotion applicator massages the body while applying ointments, creams, lotions, and medications. It comes with two different massage rollers. The inverterd roller hugs the body's natural curves and can be used to apply lotions to the arms, legs, and neck and the round roller is intended for use on the back. A pivoting head on the handle allows the rollers to be use
Bath+Safe Lock-On Elevated Toilet Seat (Models F725753100 & F725753110)
The Bath+Safe Lock-On Elevated Toilet Seat, models F725753100 and F725753110, is an elevated toilet seat designed for use by individuals with lower extremity disabilities. The unit has a locking mechanism that secures it to the toilet for stability. Openings in the front and back allow for easy access. Model F725753110 has arms that provide support while getting on and off the toilet. DIMENSIONS: Five inches high. Width between arms is 19 inches. CAPACITY: 300 pounds.
Wheelchair Cup Holder (Model F70622-0001)
The Wheelchair Cup Holder, model F70622-0001, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This unit also clamps to walkers, rollators, bed rails, and other tubular frames and is equipped with a large lever knob to secure the clamp. The attached plastic holder holds glasses, cans, bottles and it is slotted on two sides to accommodate cups with handles. The holder is is accessible for use by right- or left-handed users. DIMENSIONS: The holder is 3.5 inches hig
Star Glide Walker Slides (H70323 Series)
Star Glide Walker Slides, model H70323, are walker glide tips designed for use by individuals with walking and balance disabilities. These nylon glides replace the rubber tips on the rear legs of wheeled walkers and self-align with the floor to reduce friction and allow easier movement. DIMENSIONS: For walkers with one-inch and 1 1/8-inch diameter legs.
Raptor, The (Model F76945-0000)
The Raptor, model F76945-0000, is a reacher designed for use by individuals with arthritis, spinal cord injury, or mobility disabilities. This lightweight reacher has a contemporary design, with a contoured grip with a squeeze control for the grasping jaws set at a right angle to the rest of the unit. The jaws can grip small items such as dimes or bulky items such as newspapers, clothing, and cans. A hook-like extension at the front of the reacher can be used as a dressing aid or as a back scrat
Bath+Safe Swirl Grip Designer Grab Bars (F72460 Series)
Bath+Safe Swirl Grip Designer Grab Bars, F72460 series, are wall grab bars designed for use by individuals with balance and mobility disabilities. These bars have a swirl texture for a non-slip grasp, even when wet. Diamond-shaped mounting brackets conceal the installation screws. Mounting hardware is included. DIMENSIONS: Available in 12, 16, 18, and 24 inches long. All bars are 1.25 inches in diameter and extend 1.5 inches from the wall.
Sock Aid (Model F73841)
The Sock Aid, model F73841, is a dressing aid designed to assist individuals who have trouble bending over to put on socks or stockings. The device consists of a thin plastic sheet shaped to roll into a sock or stocking and to keep it open for the foot to enter. Cloth straps attached to the upper end allow the user to pull the sock on.
Stocking Aid (Model H73849)
The Stocking Aid, model H73849, is designed to assist individuals who cannot bend over or raise their legs to put on hosiery. The device consists of a shaped plastic sheet to keep the stocking open, and two garter clips attached to cloth straps. When the foot is placed into the stocking, the plastic is withdrawn and the stocking pulled up by the straps.
Bath+Safe Deluxe Tub Safety Rail (Model F72716-4000)
The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick.
Economy Walker Basket (Model F70319-2000)
The Economy Walker Basket, model F70319-2000, is a wire basket for walker designed to provide carring capability for people with walking or balance disabilities. This plastic-coated wire basket attaches to the cross bar and upright bars of most walkers with Velcro strips. The basket includes a heavy-duty plastic tray with one large compartment, a coin or medication holder, an a round compartment for a glass, can, or cup. DIMENSIONS: 5.5 x 16 x 7 inches.
Bath+Safe Elevated Toilet Seat With Arms (Models F725753210 & F725753310)
The Bath+Safe Elevated Toilet Seat with Arms, models F725753210 and F725753310, is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities or arthritis. Available for standard (F725753210) and elongated (F725753310) toilets, the unit has integrated, molded armrests and uses the existing toilet seat once installed. DIMENSIONS: 3.5 inches tall. Width between arms is 21 inches is the standard model or 21.5 inches in the elongated model. CAPACITY: 300 poun
Eating Tool Eating Aid (Model F74610-0500)
The Eating Tool Eating Aid, model F74610-0500, is a rocker knife and fork designed for use by individuals with use of only one hand. This polycarbonate utensil is dishwasher and autoclave safe and enables one-handed cuting of most foods into bite sized pieces. To use, the utensil is pressed down on the food, rolled to cut, and twisted to pick the food up.
The ABLEWARE HandyCup is a twin handle cup designed for use by children and adults with upper extremity disabilities. This dishwasher-safe eight-ounce cup has two handles and extra-wide base for a secure grip and stability. An angled design provides space for the nose and eyeglasses, making it possible to drink with little or no neck movement. COLOR: Transparent.
Adjustable Transfer Bench
The Adjustable Transfer Bench is designed for use by individuals with lower extremity, mobility, or balance disabilities. This molded plastic bench adjusts for right- or left-hand tub or shower entry and features height-adjustable legs with suction feet, a removable chair-style back with hand hole, a removable arm, and a built-in handshower holder. DIMENSIONS: The height adjusts from 16 to 21 inches in one-inch increments and the overall width is 30 inches. CAPACITY: 350 pounds. COLOR: White.
Maddadapt Button Loop (Models H73884 & H73885)
The Maddadapt Button Loop is a buttonhook designed to assist individuals with the use on only one hand or arm to fasten button closures. The device has a guilt-up plastic handle with sliding rings for finger positioning. Model H73884 is for small buttons; model H73885 is for larger buttons.
Grip-All, The (Model F73600-0000)
The Grip-All, model F73600-0000, is designed to enable individuals with upper extremity disabilities or spinal cord injury to hold items, such as eating and writing utensils or toothbrushes, independently. A utensil or grooming aid is placed in the gripping coil at the end of this device, creating a built-up handle. This durable dishwasher-safe plastic tube comprises two pieces connected by a toothed rim which controls the gripping action as one half is turned and the other held. A split plastic
Goni-Alert Feedback Goniometer (Model 71595-0000)
The Goni-Alert Feedback Goniometer, model 71595-0000, is a goniometer designed to measure joint range of motion. The metal construction permits observation of the joint's axis of motion and range of motion. Useful after someone has undergone a total knee, elbow, or hip replacement, the device gives auditory feedback to alert when the maximum allowed range of motion is about to be exceeded. The sound of the beep is adjustable, and a port for an earplug wire is included. A small light that indica
Inbed Head Wash System
The Inbed Head Wash System a shampoo basin designed to be used to provide hair care for persons who must remain in bed. Made of plastic, this hollow, double-walled basin features a comfortable neck rest and an internal collection system for used water. The basin also features a large drain plug that can be opened after shampooing to allow the water to drain into the hollow section between the walls. After the drain plug is tightened, the entire unit can be picked up and carried away to be emptie
Shampoo Rinse Basin
The Shampoo Rinse Basin, model H76428-0001, is a portable container designed for persons with physical disabilities who require assistance in having their hair washed. Its smooth, contoured neck rest and adjacent head support base provide comfort by minimizing stress and strain on the head, neck, and shoulders. The molded plastic basin also features a drain hose with shut-off clamp ring.
Picture Dominoes (Model H71782-0000)
Picture Dominoes, model H71782-0000, is a dominoes game designed to teach matching, sorting, and assembly skills to individuals with cognitive disabilities. Designed to be played by two people, this game includes ten plastic dominoes with clear windows on each side, a deck of 45 alphabet-picture cards, and a instruction manual. Once the alphabet-picture cards are placed in the slots below the clear windows, they can be grouped and matched easily. Other types of cards can also be used. The domino
Mini Massager (Model F70868-1000)
The Mini Massager, model F70868-1000, is designed for use with individuals with sensory, cognitive, and neurological disabilities. This lightweight, folding unit includes four interchangeable massage heads--a muscle massager, a concentrated massager, a scalp massager, and an all-over body massager. Each massage head is touch-activated, massaging when it comes in contact with skin. When open, its L-shaped handle makes it easier to access areas of the body that are normally out of reach. A lightwe
Inflatable Invalid Ring (Model F76660)
The Inflatable Invalid Ring, model F76660, is a ring seat cushion designed to take pressure off the tailbone. This oval cushion is inflatable by mouth or pump. When deflated, the cushion will fold to fit in a pocket or purse. The ring is made of heat-sealed vinyl. DIMENSIONS: 15 x 13 x 3 inches, inflated; center hole is 5 x 7.5 inches.
Tilting Bottle Rest (Model F74577-0000)
The Tilting Bottle Rest, model F74577-0000, is an adjustable bottle holder designed for use by individuals with upper extremity disabilities. Made of polypropylene, this bottle rest holds soda or water bottles at a 30 or 45-degree angle for drinking with a straw. Simply slide the base of bottle into the box and place it on any flat surface. A removable V-notch support makes changing the angle at which a bottle is held easy. DIMENSIONS (LxWxH): 4.4 x 6.6 x 5 inches.
Chairmate Cup Holder/ashtray Holder (Model F70622-0000)
The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in
People Feeder (Model H74581-0001)
The People Feeder, model H74581-0001, is a plastic glass with lid and spout designed for use by individuals with swallowing disabilities. It allows caregivers to dispense thick soups or pureed food at any rate. This feeding glass features a feeding nozzle that holds one tablespoon of food and and a food reservoir that has a plunger that forces the food through a side port into the feeding nozzle. The soft silicon rubber nozzle can be squeezed to control the flow of food into the person's mouth
Drinking Aid with Flow Regulator
The Drinking Aid with Flow Regulator, model H74581-0000, is a plastic glass with lid and spout designed for use by individuals with swallowing disabilities. It allows caregivers to dispense hot and cold liquids at any rate. This feeding glass features a soft, rubber silicon feeding nozzle, capable of holding an ounce of food at one time, and a food reservoir that has a plunger that forces the food through a side port into the feeding nozzle.The flow of fluid can be controlled by covering or unco
Feeding Bottle With Flexible Tube
The Feeding Bottle with Flexible Tube is designed for use by children and adults with swallowing and eating disabilities. It holds eight ounces of liquid and features a tube that extends from the bottom of the bottle out through a screw cap to control fluid intake. The bottle is also graduated in ounces and milliliters to aid in dispensing measured amounts of liquid.
Knee Separator (Model F78480)
The Knee Separator, model F78480, is designed to provide gentle pressure between the legs for wheelchair users. The device is made of heavy-gauge plastic with a foam rubber lining for even pressure distribution. SIZES: Based on thigh circumference; Small (model H78480-0012) for 12 to 14 inches, Medium (model F78480-0015) for 15 to 17 inches, and Large (model F78480-0018) for 18 to 20 inches.
Baby Booster Infant Stimulation Kit
The Baby Booster Infant Stimulation Kit is a sensory integration activity kit designed for use witt infants and toddlers with neurological or sensory disabilities. This interactive kit includes activities that focus on six different sensory areas: preceptor stimulation, tactile stimulation, auditory stimulation, olfactory/gustatory stimulation, and vocalization. Special components and instructions are provided for each area to maximize the skill-building and learning process.
Ableware Deluxe Flexible Sock And Stocking Aid
The Ableware Deluxe Flexible Sock and Stocking Aid is designed for use by individuals with arthritis or lower extremity or mobility disabilities. This aid has a flexible plastic core with a three-finger design. The core is lined with nylon to reduce friction and covered with terry cloth on the bottom to prevent the sock from slipping. Two long loop handles aid in pulling the device. To use the sock or compression stocking is slipped over the aid with the three fingers toward the toe. The aid is
Shampoo Rinse Tray
The Shampoo Rinse Tray is a shampoo basin designed to be used to provide hair care for persons who must remain in bed. Features include a hose with a cut off clamp that allows immediate water drainage. Liquid capacity is 7 quarts. DIMENSIONS: 25.5 x 18 x 5 inches.
The Straw Holder is designed for use by individuals with upper extremity and drinking disabilities. This clip-on device mounts onto the edge of any glass or cup to keep a drinking straw in position. The device will fit any straw under 3/8 inches in diameter.
Angled Spoon With Built-Up Handle
The Angled Spoon is a spoon with built-up handle designed for use by people with limited range of motion, neurological and upper extremity disabilities or arthritis. Designed for right-handed use, this spoon minimizes movement of the shoulder and forearm as food is scooped onto the spoon with elbow motion. The spoon has a 45-degree offset quad grip handle and a hard plastic bowl with a ridge at the back to prevent spillage. It is latex free and dishwasher safe.
Maddak Eating Partitioned Scoop Dish With Lid, Model F745270000
The Partitioned Dish is a partitioned plate designed for use by individuals with upper extremity disabilities. Available with or without a cover, this dishwasher-safe dish is divided into three sections, one that holds eight ounces and two that hold four ounces.
Anthro Tall-Ette Elevated Toilet Seat
The Anthro Tall-Ette Elevated Toilet Seat is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities. Made of polyethylene plastic, this seat unit slopes on either the left or right side and raises the toilet seat permitting the user to extend the leg without bending. The seat requires less than 90-degree hip flexion. The unit comes with a Lok-In El bracket that easily slides under the hinge pin of the existing toilet seat while two large posts mate
Ezy Sock Helper For Caregiver (Model F73854)
The Maddak Ezy Sock Helper for Caregiver is a sock and stocking aid designed for use by the caregivers of individuals who have difficulty bending. Constructed of plastic-coated steel, this aid has a column over which socks or hose are stretched. Once the sock is on the frame, the caregiver inserts the individual's toes and pulls up on the side handles until the sock is properly positioned. COLOR: Black.
Ableware Softcurve Grip Cutlery (Series 74642)
ABLEWARE SoftCurve Grip Cutlery, series 74642, is a knife, fork, and spoons with built-up handles designed for use by individuals with arthritis or limited grasping ability. Made of dishwasher-safe stainless steel with large, soft santoprene handles, the utensils have handles that are ergonomically designed with a slight curve at the end to fit securely in the hand. Available models include a table knife, fork, teaspoon, and soup spoon (each sold separately).
Family Toilet Seat (Model F726200000)
The Family Toilet Seat, model F726200000, is a combination child's and adult toilet seat designed for use with children with mobility or balance disabilities. Made of durable, flexible plastic and designed to fit most standard toilets, this seat features a child's toilet seat with a smaller opening fitthed between the standard adult seat and the attached lid. When not in use, the chil's seat can be flipped up to rest inside the recess of the lid. Rubber bumpers on the under side of the bottom se
Ableware Halo Cup
The ABLEWARE Halo Cup is a pedestal cup with a large handle designed for use by children with upper extremity disabilities. This dishwasher-safe 6.5-ounce cup has a wide halo base to provide stability, and the handle eliminates the need for gripping.
Ableware Ring Writer Clip
The Ableware Ring Writer Clip is a a utensil or pen or pencil holder designed for use by individuals with arthritis or limited manual dexterity or gripping ability. Made of polyethylene, this device consists of two linked rings. The larger ring slips over a thumb or finger and the implement or utensil handle slips into the smaller ring at the correct angle for use. This device can be used with pens, pencils, paint brushes, straight razors, tooth brushes, etc. SIZES: The package of three include
Ableware Children's Seat
The ABLEWARE Children's Seat is a youth positioning chair designed for use with children with balance, mobility, or neurological disabilities. This molded box-style seat is reversible for different seat heights and features slots to accommodate pelvic straps (not included) for use as a booster seat/highchair alternative. DIMENSIONS: The seat is 4.5 inches high on one side and 6.5 inches high on the other. WEIGHT: Less than 4.5 pounds.
Ableware Door Knob Gripper
The ABLEWARE Door Knob Gripper is a grasping aid for hand designed for use by individuals with arthritis of the hand or fingers or other grasping disabilities. The Gripper fits over round door knobs and outdoor water faucets. The outside is smooth to the touch and the inside is ribbed to firmly grip the door knob. With this device, knobs can be turned with the stroke of the hand, and no hand strength is required.
Nosey Whiplash Cup
The Whiplash Nosey Cup is a nose cutout glass designed for use by children and adults with head and neck or drinking and swallowing disabilities. This cup has a nose cutout so that drinking requires little or no head movement. Since the cup is clear, both the remaining liquid and the position of the lips and tongue can be observed. This glass is dishwasher safe and autoclavable. DIMENSIONS: 4 7/8 inches high.
No-Wire Walker Basket
The No-Wire Walker Basket is a caddy for a walker designed for use by children or adults with mobility disabilities. Made of polypropylene, this basket attaches to the horizontal and vertical bars of the walker on the inside or the outside. Retracting stabilizing arms lock onto the legs of the walker to eliminate swinging. A slot on the front of the basket holds an identification tag. The bottom of the basket features a built-in glass, can, or cup holder; a smaller compartment for coins or medic
The Maddacare Footstool is an ergonomic footstool designed for use by individuals with lower extremity and circulatory disabilities. This lightweight molded footstool offers two heights for optimal leg positioning in front of toilets, under desks and tables, and in front of chairs and sofas. A built-in handle slot aids in portability. DIMENSIONS: On one side, the stool provides 4.5 inches of elevation; when turned over, the stool provides 6.5 inches of elevation. WEIGHT: 4.5 pounds.
The Cane Clamp is a cane holder designed for use by individuals with mobility disabilities. This plastic clamp attaches with the included plastic screw to shelves, the edges of tables and desks, etc. to keep the cane upright and in reach. DIMENSIONS: The clamp attaches to surfaces up to 1 1/8 inch thick and accepts canes up to one inch in diameter.
Tall-Ette Extra-Wide Elevated Toilet Seat With Legs (Model F725881000 & F725882000)
The Tall-Ette Extra-Wide Elevated Toilet Seat, models F725881000 and F725882000, is a molded elevated toilet seat designed for use by individuals with mobility disabilities. This molded plastic unit fits over the existing toilet bowl with the seat up and features contoured, soft foam rubber armrests, and height-adjustable support legs with rubber tips. The legs are made of aluminum (F725881000) or steel (F725882000). DIMENSIONS: Adds four inches of height to the bowl and the legs adjust up to 28
Hinged Elevated Toilet Seat (Models F725710000 & F725710005)
The Hinged Elevated Toilet Seat, models F725710000 and F725710005, is a molded elevated toilet seat designed for use by individuals with mobility disabilities or arthritis. This molded plastic unit installs permanently under the existing toilet seat and cover. The unit is made of two parts which are hinged together, allowing the ring to be lifted in the same manner as a standard toilet seat. It elevates the seating position for easy sitting and rising. A hardware kit is included. SIZES: Standard
Anus Stimulator (Model H72514-0000)
The Anus Stimulator, model H72514-000) is an anal stimulator designed to stimulate bowell function for individuals with spinal cord injuries. Attached to a universal cuff that can be adjusted to fit any adult hand, this plastic probe is equipped with a plastic collar to control insertion depth. DIMENSIONS: The unit is 8 inches long and the probe is 3.5 inches long and 0.5 inch in diameter.
Soft Touch Tuffet Leg Rest
The Soft Touch Tuffet Leg Rest is a footstool designed for use by individuals with lower extremity disabilities or who use wheelchairs. This soft plastic footstool rocks to the most comfortable position or inverts for use as a standard footstool and it fits between the swing-away legrests of most standard wheelchairs. An air valve releases air from within to adjust firmness. DIMENSIONS: 20 x 15 x 15 inches. WEIGHT: 6.5 pounds.
Bedside Beverage Holder
The Bedside Beverage Holder is a cup, can, or bottle hoder designed to clamp onto bed rails. This unit features a flexible holder arm and an adjustable clamp. DIMENSIONS: The arm is 11 inches long and the clamp adjusts to fit rails from 0.75 to 1 inch in diameter.
Ableware Ablerise Bed Rail
ABLEWARE AbleRise Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets.
Ableware Shoehorn With T Handle
The ABLEWARE Shoehorn with T Handle is a long handled shoe horn designed for use by individuals who have difficulty bending to put on shoes and who have arthritis or other disabilities of the hand. The T-shaped handle reduces the need for the user to fully close the hand or rotate the wrist. DIMENSIONS: 19.5 inches long. WEIGHT: 0.218 pounds.
The Tube Squeezer is a tube key designed for use by individuals with arthritis or other disabilities of the hand. The unit consists of a base into which the bottom of a plastic or metal toothpaste, ointment, or other tube is placed. Turning the key on the side dispenses the product. As the tube empties, it wraps around the key.
Adjustable Bowling Ball Pusher
The Adjustable Bowling Ball Pusher is a bowling ball pusher designed for use by individuals with mobility and upper extremity disabilities. The device may be used from a wheelchair or from a standing position and is used to push and guide the ball down the alley. This unit features a padded extension handle that lengthens for use and shortens for storage and transport. The inverted C-shaped pusher at the end has plastic caps on each arm to protect the floor surface. DIMENSIONS: 38 inches long an
Soft Nosey Cup
The Soft Nosey cup is a nose cutout glass designed to mininmize neck extension while drinking for individuals who have trouble tilting their head back. The cup also promotes proper chin tuck. Molded of soft plastic for easier grasping, this cup is dishwasher safe and can hold up to eight ounces.
Easy Out Tube Squeezer
The Easy Out Tube Squeezer is a tube key designed to enable individuals with upper extremity disabilities to dispense toothpaste, lotions, salves, and household products from tubes. The tube is placed in the device and the top of the device is depressed to dispense. The tube is squeezed from the botom up and a unique feature enables the last drops of product to be squeezed out after the tube has been expelled up to the collar.
The Lotion Applicator is designed to enable individuals with mobility and upper extremity disabilities to apply lotion to difficult to reach places. This applicator can be used with lotions, creams, suntan oil, sports creams, and topical medications. This device features a long, built-up, ribbed handle with a thumb rest attached to a round pad holder for cream application. The handle is angled in two places for maneuverability and the pad may be replaced when worn. OPTIONS: A set of two replacem
Fishing Pole Holder For Wheelchairs (Model H706631000)
The Fishing Pole Holder for Wheelchairs, model H706631000, is a fishing rod holder designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use a wheelchair, especially people who have use of only one hand. This holder features a rigid PVC tube that secures the fishing rod handle while a slot in the handle supports the reel and keeps it from rotating as the fish is reeled in. It attaches to any tubular component of a wheelchair frame (or
The Maddagrip Opener is a jar opener designed for use by individuals with limited grasping ability. This soft, large-diameter opener fits the entire hand for extra turning power. This device conforms to most lids, from small vials and bottles to large jars, and enables lids to be removed by exerting pressure with the palm and twisting.
Walker Bag Hook
The Walker Bag Hook is a carrying hook for a walker designed for use by individuals with mobility disabilities. This large plastic hook attaches to the walker with an adjustable clamp and carries a pocketbook or similar item, leaving the individual's hands free to use the walker. DIMENSIONS: The clamp adjusts to fit tubing from 0.5 to 1.125 inches in diameter.
Ableware Elevated Wheelchair Transfer Seat (Model 72560-0051)
The Ableware Elevated Wheelchair Transfer Seat is a molded elevated toilet seat designed for use by individuals who use wheelchairs. This seat bolts on to most standard toilets using the included hardware and utilizes the exisiting toilet seat. The unit extends out from the toilet seat and features lateral gripping slots on each side. DIMENSIONS: The unit adds three inches to the height of the toilet seat.
Elevated Push-Up Toilet Seat With Armrests (Model F725600050)
The Elevated Push-Up Toilet Seat with Armrests, model F725600050, is a molded elevated toilet seat designed for use by individuals who have difficulty rising from or lowering to a standard toilet seat. This seat bolts on to most standard toilets using the included hardware and utilizes the exisiting toilet seat. The unit extends out from the toilet seat and features molded armrests and lateral gripping slots on each side. DIMENSIONS: The unit adds three inches to the height of the toilet seat an
The ABLEWARE Exer-Twist is an arm exerciser designed for use by individuals with upper extremity disabilities. This device equally and simultaneously exercises the left and right side muscles of the forearms, arms, shoulders, and chest, helping to increase wrist and joint circulation and agility. To use, the user simply twists the device with the same motion that would be used to wring out a wet towell. OPTIONS: Snap on grips are available for those with larger hands or those who are unable to c
Ableware Reversible Toilet Transfer Seat (Rtts)
The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan
Sit And Ride
The Sit and Ride is an ambulation pattern trainer designed for use with children with developmental delays and adults with mobility disabilities. This device permits practice while seated of such ambulatory patterns as smooth reciprocal leg movements, heel strikes, and coordinated knee fexion and extension. The unit has a lightweight plastic base equipped with casters suitable for use on hard floors and most carpeting. A height-adjustable sling seat is suspended between the two arms of the base,
Double Ezy Sock Helper
The Double Ezy Sock Helper is a sock and stocking aid designed for use by individuals who have difficulty bending. Constructed of plastic-coated steel, this aid has two columns over which the socks or hose are stretched. Once the hose are on the frame, the user inserts his/her toes and pulls up on the side handles until the hose are properly positioned.
Ableware 754140111 Big Lamp Switch by Maddak
The Big Lamp Switch is a lamp switch extension designed for use by individuals with arthritis or limited manual dexterity. This large Y-shaped knob screws on to replace most standard turn-style lamp switches and extends away from the lamp socket for easier grasping.
Ableware Rolling Shower Chaise
The Ableware Rolling Shower Chaise is a caster shower chair designed for use with children with mobility disabilities. FRAME: Aluminum frame with an extended front bumper bar to protect the child's feet. SEAT: A molded seat in lavender or turquoise. The seat has adjustable safety straps, a four-position, height-adjustable headrest, a holder for a hand-held shower, and a soap holder. CASTERS: Four black casters. The two rear casters include foot-operated brakes.
Ableware Partitioned Scoop Dish With Lid
The ABLEWARE Scoop Dish with Lid is a partitioned plate designed for use by children and adults with upper extremity or eating disabilities. This microwave- and dishwasher-safe dish features a lid and three separate compartments, two that hold up to 6.75 ounces and one that holds 12.6 ounces. The dish can accommodate liquid, pureed, or solid foods without spilling or having the separated foods overflow into the other compartments. The high walls between the sections also act as bumpers to assi
Pediatric Drinking Cup With Two Handles
The Pediatric Drinking Cup with Two Handles is a twin handle cup designed for children with upper extremity disabilities. Made of polypropylene plastic, the cup has proportionate twin handles provide a secure grip. This cup holds 6 ounces and is dishwasher safe on the top rack.
The Cane Valet is a cane holder designed to allow canes to be hung from the edge of a desk or table or to be wedged under the edge of a desk or table. This small square device snaps on to the shaft of most canes and a small rubber band placed around the end hooks maintains a secure grip.
Children's Doidy Cup
The Children's Doidy Cup is a twin handle cup designed for children with upper extremity disabilities. Made of dishwasher-safe rigid polypropylene plastic, the cup is angled and has a "leaning" shape to reduce the need for head and neck movement while drinking. Proportionate twin handles provide a secure grip. This cup holds 6.5 ounces.
She Canery Hand Decorated Canes
She Canery Hand Decorated Canes are straight canes designed for use by women with mobility disabilities. These lightweight aluminum canes are plastic coated with a base color, hand decorated in a variety of patterns, and then clear coated for protection. The canes have a U handle and a rubber tip and may be cut to the desired size. DIMENSIONS: 38 inches long. COLOR: White with pink roses, black with calla lillies, blue with daisies, black with a gold long-stemmed rose, white with purple pansies,
Spill-Not Cup Stabilizer (Model F74544-0001)
The Spill-Not Cup Stabilizer, model F74544-0001, is a drinking cup with a holder/base designed to keep drinks in an upright position and to avoid spills. The unit will hold an 8-ounce paper or foam cup or a drinking glass. The hexagonal base features a well to position the cup. It is molded of polypropylene and is autoclavable at 250 degrees Fahrenheit. DIMENSIONS: 3.25 inches across the flats of the hexagon; the well is 2 1/8 inches in diameter. COLOR: Bright yellow to provide increased visibil
Large Magnifier With Neck Strap (Model 73372-0002)
The Large Magnifier with Neck Strap, model 73372-0002, is designed for sewing, reading, stamp and coin collecting, drafting, and other fine work requiring hands-free magnification. The plastic lens is mounted on a plastic frame with a chest yoke and adjustable neck loop. Focal length is 8 inches. DIMENSIONS: Lens is 4.5 inches in diameter. WEIGHT: 8 ounces.
Lighted Magnifier (Model 73374)
The Lighted Magnifier, model 73374, is designed to magnify and illuminate text or materials. The device has a square clear acrylic unbreakable lens and a sharp focused flashlight. The unit is housed in a plastic case holding two AAA batteries (included), a high intensity bulb, and thumb switch. DIMENSIONS: 4.75 x 1.5 x 7/8 inches overall; the lens is 1.25 inches square. COLOR: Case is black.
Textured Grip Ball (Model H70858)
The Textured Grip Ball, model H70858, is a hand exercise ball with a surface made of small individual bumps and a center hole. There is an internal bell which rings when shaken. The end of the hole may be pushed through with a pencil to create a pencil holder for persons requiring a built-up writing instrument holder. DIMENSIONS: 2 inches in diameter.
Cups With Sleeve (Model H74600)
The Cups with Sleeve, model H74600, are non-breakable frosted plastic cups with a sleeve attached to it for inserting either pre-formed or flexible handles to assist individuals with limited manual dexterity or strength to drink independently. The handles can be shaped to fit individual needs such as two handles, one handle in the shape of a palmar cuff, etc. All components of the cup are dishwasher safe.
Little-Spill Drinking Cup
The Little-Spill Drinking Cup is a cup with a lid designed for individuals with disabilities affecting swallowing and drinking. This eight-ounce frosted plastic cup is equipped with a deep-dished lid with two small holes designed to permit controlled flow of liquid during drinking and to prevent spills.
Flo-Trol Vacuum Feeding Cup
The Flo-Trol Vacuum Feeding Cup is a plastic glass and lid with a spout designed to prevent any spillage from the container, even if the cup is lying on its side, while allowing drinking when the vacuum button is pressed. Available with a rubber air release button to enable drinking liquid without raising the head; pushing this button releases a small, controlled amount of liquid. The cup is also available without the rubber plug and intake can be controlled by placing a finger over the air ven
Vikem Vinyl Pillow Case
The Vikem Vinyl Pillow Case is a pillow protector designed for use by individuals who have allergies or swallowing disabilities. This clear case have zipper closure. DIMENSIONS: 21 x 27 inches; other sizes made to order.
Straw Holder (Model F74562)
The Straw Holder, model F74562, is designed to keep a straw in position for drinking. The device consists of a plastic clip which mounts onto the edge of a glass. These holders are sold in bags of 6.
Clip-On Glass Holder (Model F74576)
The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.
The Long Shoehorn is a plastic long-handled shoehorn designed to assist individuals with back problems or other conditions which hinder bending over to put on shoes. This aid has a curved handle and a hanging hole. DIMENSIONS: 17.5 inches long.
Maddadapt Long-Handled Bath Sponge (Model F74122)
The Maddadapt Long-Handled Bath Sponge, Model F74122, is designed for individuals with limited arm movement to assist them with bathing. A round polyurethane sponge is mounted on a thumb-nut swivel attached to a polypropylene extension rod with a built-up handle. DIMENSIONS: Sponge is 4 inches in diameter and 2 inches thick; the handle is 4.5 inches long and 7/8 inches in diameter.
Inflatable Crescent Shaped Shampoo Tray
The Inflatable Crescent Shaped Shampoo Tray is a shampoo basin designed to be used to provide hair cair for persons who must remain in bed. When inflated, the basin fits into the space usually occupied by the pillow and forms a semi-circular ring with one flat side for neck support. Made of soft, heat-sealed plastic, the basin can be inflated by mouth or with a small pump and features a large drain tube for complete emptying after use.
Shampoo-Aide Shampoo Tray
The Shampoo-Aide Shampoo Tray is a shampoo basin designed to enable people who use wheelchairs or cannot shampoo independently to have their hair washed while seated at a sink. The individual can be seated in a chair or a wheelchair. This hinged, two-piece tray features a U-shaped neck cut-out. It is made of lightweight, high-impact polystyrene. The front half of the tray rests on the user's shoulders, resting against the back of the sink to support the head, and the other half extends into the
Walker / Wheelchair Bag
The Walker/Wheelchair Bag is a carrying bag for a walker or a wheelchair back pouch designed to enable persons with mobility disabilities to transport personal items. Made of plastic-coated nylon with cotton binding, the bag features two reinforced pockets and attaches to the walker or wheelchair using hook-and-loop fasteners. The bag is mildew and fungus resistant and can be machine washed and dried. DIMENSIONS (LxH): 22 x 10 inches. COLOR: White.
Flex-On Sock And Stocking Aid (Model Pc F73848)
The Flex-on Sock and Stocking Aid, model PC F73848, is designed to assist people with mobility disabilities or who have difficulty bending or stretching in donning socks and stockings. The device consists of a contoured plastic shell with a cloth loop handle. Hook-and-loop fasteners and garters are affixed to the shell. The fasteners or garters are used to hold the sock or stocking in place and by lining up the shell with the foot and pulling up on the loop handle, the sock or stocking is guid
One Hand Fingernail Clipper
The One Hand Fingernail Clipper is a nail clipper designed for use by individuals with upper extremity disabilities. A fingernail clipper is mounted on a finished plywood base. The user rests a hand on the base with fingernail to be trimmed in the jaws of the clipper. When the board is pressed down with heel of the hand, the jaws close and the nail is trimmed. The board also has two emery strips for filing nails.
The Maddacrawler is a crawler designed for use with children and adults with mobility disabilities. The device is used to teach elementary crawling skills, properly aligning the user's body and encouraging crawling motions and weight bearing on the hands and knees. A height-adjustable sling provides support and the casters are suitable for use on hard floors and most carpeting. OPTIONS: Arm attachments to transform the crawler to a Sit and Ride. CAPACITY: 175 pounds.
Self Examining Mirrors (Model F74101-0000 & -0001)
Self exmaning mirrors are designed to widen the field of view and allow individuals to examine many parts of their body for people with limited mobility. The mirror s are shatter proof and mounted on telescoping handles which are adjustable in length. The mirror is oval shaped and can be rotates around the handle and tilted over a 90 degree range. There are two models available. The Single Handle Mirror, model F74101-0000, has a soft rubber covering on the handle which includes a hand loop. The
Tca Toglia Category Assessment (Model K11060)
The TCA Toglia Category Assessment, Model K11060, is a cognitive rehabilitation evaluation program designed for persons with cognitive and mental disabilities. The assessment kit consists of plastic utensils which the subject is asked to sort by color, size and type to establish the ability to categorize and switch concepts. Detailed and systemic guidelines are provided to facilitate performance through the use of cues and help determine and design an appropriate intervention program. The easily
Steady Write Writing Instrument
The Steady Write Writing Instrument is a pen holder designed for use by individuals with arthritis, Parkinson’s, or other grasping disabilities. Designed to help correct shaky handwriting for individuals who have difficulty gripping or controlling motor skills, this product helps to stabilize the hand with extra support while providing increased holding capacity. When the pen is attached to the triangular base, it automatically assumes the proper writing angle and the frictionless base glides sm
Bathsafe Standard Elevated Toilet Seat (Model F725743000)
The BathSafe Standard Elevated Toilet Seat, model F725743000, is designed for use by persons with physical disabilities who have difficulty sitting down and standing up. This elevated toilet seat features a wider opening in front and back for easier personal hygiene. The front opening slopes downward to prevent spillage. The unit fits most standard toilet seats. DIMENSIONS: 5 inch elevation. CAPACITY: 300 pounds.
Clear Plastic Tray
The Clear Plastic Tray is a tray for a walker designed to carry small items inside a walker basket. Made of molded plastic, the tray consists of three separate compartments specially designed to hold books, glasses, coins, medications, and a drinking glass, can or cup. DIMENSIONS: The largest compartment in the tray measures 8.5 inches x 3.75 inches x 2 3/8 inches deep (22 x 9 x 6 centimeters).
Ableware Inner Lip Plate With Suction Cup Base (Model 74531-0050)
The ABLEWARE Inner Lip Plate with Suction Cup Base, model 74531-0050, is a plate with a suction base designed for use by individuals with upper extremity disabilities. Three suction cup-tipped legs on the bottom elevate the plastic plate slightly and prevent it from sliding on a table top or other smooth surface. DIMENSIONS: 9 inches in diameter. COLOR: Sandstone or light blue.
Round-Up Plate (Model 74529-0050)
The ROUND-UP PLATE is designed to keep food from sliding off. Similar to the INNER-LIP PLATE, it also features three suction cups to secure the plate. This plate, however, features a narrow rim on one side with a wide-based rim on the other. SIZE: 8 inches in diameter.
Dr Joseph's Original Footbrush
Long handled footbrush with sponge and brush. Contoured 25 inch handle with wrist strap. Lightweight, unbreakable polymer plastic handle. Removable sponge tip for between toe cleaning.
Artho Thumbs-Up Cup
The Artho Thumbs-Up Cup is a twin handle cup designed for use by children or adults with hand disabilities or arthritis. This cup is equipped with a thumb rest above each handle for stability and easy lifting. Available with or without a lid, the cup is fabricated of lightweight, insulated plastic, is microwave and dishwasher safe, and holds eight fluid ounces. OPTIONS: A replacement lid is available. COLOR: Beige.
Page Turner And Cuff (Model 73216-0136)
The Page Turner and Cuff, model 73216-0136, is a hand held page turner that consists of a lightweight cuff attached to a wooden dowel with a rubber friction tip. The cuff fits on the user's hand by means of a D-ring and Velcro closure.
Adjustable Headstick / Pointer (Model H71830)
The Adjustable Headstick/Pointer, model H71830, is a headwand designed to assist nonvocal individuals with communication. The device may also be used as an actuator for switches or controls. The device consists of plastic bands adjustable to the size of the user's head and reinforced with metal hardware, and topped with the aluminum pointer rod. The headband features padding at the forehead for comfort. The rod is length and angle adjustable in any direction and has a pencil holder at the tip. D
Cane Clip With Table Clamp (Model 70325-0001)
The Cane Clip with Table Clamp, model 70325-0001, is a cane holder designed to accommodate any size cane securely, while allowing easy release. The device has a spring-action clamp with grooved, soft plastic rollers that will not mar the cane's shaft. The rubber-lined clamp fits onto table tops or counters up to 1.75 inches thick and is secured by a clamping screw with a swivel glide. DIMENSIONS: 3.75 x 3.5 x 2 inches.
Cane Holder (Model 70325-0002)
The Cane Holder, model 70325-0002, is a double-clip holder that allows a cane or crutch to be suspended or secured against any tubular structure such as a table leg, walker, commode, wheelchair, or lawn chair. The non-marring, plastic clips have grooved gripping surfaces. DIMENSIONS: 3 x 2 x 1.75 inches.
Patient Pivot Transfer Disk (Model H70407)
The Patient Pivot Transfer Disk, model H70407, is a standing transfer aid designed for exchanges between one chair and another, or a wheelchair and a bed. The device consists of a rotating platform with ribbed rubber top and bottom faces. The top surface rotates while the bottom remains stationary, and internal friction pads control the rate of turning. DIMENSIONS: Disk is 0.5 inches high, and is available in diameters of 12 inches (H70407-0002) or 15 inches (H70407-0003). WEIGHT: Under 3 pounds
Oxygen Tank Holder For Wheelchair (Model F706201000)
The Oxygen Tank Holder, model F706201000, is designed to keep a cylinder of oxygen attached to the back of a wheelchair. The holder has a 5-inch inside diameter for insertion of size "E" or 4-inch diameter tanks. A 26-inch long tank is positioned off-center behind the wheelchair back to avoid interference with the wheelchair user’s head or back. The holder is made of heavy duty, waterproof black nylon.
Wheelchair Shampoo Rinse Tray (Model 70678)
The Wheelchair Shampoo Rinse Tray, model 70678, is designed to attach to the push handles of a wheelchair and to rest in a sink basin so that shampooing, ear irrigation, or scalp treatment can be done while the individual is still in the wheelchair. A neck rest allows the head to be placed directly over the tray, which can be adjusted to any angle. The blamp bar is adjustable for various chair widths.
Activity Tray Swivels (Model 70675-0000)
The Activity Tray Swivels, model 70675-0000, is a swing away lapboard designed to be attached to the tubing on most wheelchairs. The tray is made of birchwood and has a clear non-slip finish on the top surface. The tray has a lip to keep items from rolling off. It is supplied with a flat triangular aluminum support and a screw-mounted 3/8-inch long aluminum spindle at one corner. DIMENSIONS: 13 x 17 inches.
Capscrew Opener (Model F75346-0002)
The Capscrew Opener, model F75346-0002, is designed to assist individuals with the use of only one hand or who have limited manual strength to open jars and bottles with caps from 5/8 to more than 3 inches in diameter. The opener may be mounted on the wall or removed from its wall braket for hand-held use on a table or counter. The device is bell shaped and made of molded of polypropylene with a soft rubber liner that grips screw top pushed into it and twisted. DIMENSIONS: Bell is 3.5 inches in
Medi-Crush Tablet Crusher (Model F75363)
The Medi-Crush Tablet Crusher, model F75363, is a pill crusher designed to allow individuals to take pills and tablets with water in powder form. The device should thoroughly pulverize pills with no loss of medicine. The crushing cavity accepts a 1-inch in diameter plastic cup (12 included) for easy retrieval of powder. The device is made of molded plastic with a satin-finish base. An enlarged handle is used to crush the tablets. DIMENSIONS: 9 x 3 x 3.5 inches.
Thera-Tube Exerciser (Models 70944-0000 To -0004)
The Thera-Tube Exerciser, model 70944, is a progressive resistive arm exerciser designed strengthen muscles, increase range of motion, promote cardivascular fitness, or provide geriatric exercising. The bands are made of Latex rubber tubing, and available in 5 different diameters offering different resistance to stretching. The tubing may be cut to the desired length with scissors and tied to extend lengths or make a loop. Sold in bags of 5 10-foot lengths. DIMENSIONS: Model 70944-0000 is 1/8 in
Hold-And-Read (Model 73230)
The Hold-and-Read, model 73230, is a bookholder with clips to support a paperback book for reading and flipping pages with one hand or with a mouthstick. Folding plastic clips hold the left and right sides of the paperback. The holder is made of transparent polycarbonate plastic and has a brass center rivet. The holder will accommodate any thickness book. DIMENSIONS: .75 x 5.25 inches closed; 9 inches open. WEIGHT: .04 ounces.
Cane Clip (Model 70327-0007)
The Cane Clip, model 70327-0007, is a cane holder with an adhesive pad for attachment to any flat vertical surface. The base also has two screw holes for permanent mounting to the edge of a desk, wall, cabinet, or other surface. The clip will accommodate canes up to 1 inch in diameter. Sold in packages of 6. DIMENSIONS: 2 7/8 x 13/16 inches; projects 1 7/8 inches from the surface.
Wheelchair Snack Tray (Model 70621-0000)
The Wheelchair Snack Tray, model 70621-0000, is a lapboard designed to clamp to wheelchair tubing to hold snacks and beverages. The tray sticks to a platform by Velcro pads to facilitate removal for cleaning. The try is made of polystyrene; metal parts are epoxy coated. DIMENSIONS: 6.5 x 9.75 inches.
Wheelchair Gloves (Model 70628)
Wheelchair Gloves, model 70628, are push gloves made of leather. The gloves cover the palm and back of the hands leaving fingers exposed. The leather attaches around the hand with Velcro closures. Sold in pairs.
Slip-On Dressing Aid (Model F73839)
The Slip-On Dressing Aid, model F73839, is a long handled aid designed to assist wheelchair users and persons with back problems or arthritis to don stockings, socks, underwear, shorts and slacks. The device consists of a pair of curved plastic rods which rock against each other along a section of intermeshing teeth molded into their inner surfaces. Each rod has a pad of Velcro hook material at one end to hold onto an article of clothing. By squeezing the other ends of the rod together, the rods
Multi-Level Hand Grip (Model F72481)
The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248
Arthwriter Hand Aid, The (Model F73514)
The Arthwriter Hand Aid, model F73514, is a grasping aid designed to provide grip assistance to individuals with hand or finger disabilities, particularly arthritis, missing fingers, or persons wearing hand casts. The device may be used to holds pencils, pens, razors, toothbrushes, or other utensils. The unit consists of a plastic ball with a 0.75-inch central hole. An enlarged thumbscrew on the side clamps the handle of the item inserted into the hole to secure it. DIMENSIONS: Ball is 3 inches
Maddawash Terry Wash Mitt
The Maddawash Terry Wash Mitt is designed for use by individuals with grasping disabilities. This mitt is made of terrycloth with a small soap pocket designed to assist individuals in grasping a soap bar and to eliminate the need to bend over to pick up dropped soap. This mitt may be used for shower and bath use, or for washing dishes. The unit has elastic at the wrist and the top of the soap pocket to assure a snug fit. The mitt can be reversed for use with the other hand by turning the pocket
Melaware Eating Aids Plate (Model H74513-0001)
The Melaware Eating Aids Plate and Dinner Plate are plastic scoop dishes designed to assist individuals with the use of only one hand or with limited manual strength and coordination to put food on utensils. The plates are oval-shaped, with a tall lip on one side to help push food the utensil, and a large flange on the other side to help prevent spills. Two sizes are available: a dinner plate and a smaller sandwich plate. DIMENSIONS: Dinner Plate (no. H74513-0002) is 8 x 11 inches; smaller Plate
Clip-On Drink Holder (Model F74575)
The Clip-On Drink Holder, model F74575, is a plated steel spring clip attached to a rigid plastic holder designed to fit tubular furniture, wheelchairs, beds, etc. to support cups and mugs. The holder has a 2.75-inch inside diameter at the bottom and tapers to a large opening at the top. The two sides are notched out so that cups and mugs with handles can be accommodated. DIMENSIONS: Height of the holder is 3.5 inches.
Ableware Tko Turning Knob Operator (Model H75310)
The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, includi
Maddacomfort Sling (Model F78461)
The Maddacomfort Sling, model F78461, is an arm sling designed to provide comfort and support at the shoulder, hand, and arm areas. The sling is made of polyurethane foam bound in a fine open mesh knit cover and features an oval wrist pad and a square elbow pad. A 1-inch wide web strap with plated metal buckles provides solid support and proper positioning of the injured limb. The sling is washable.
Baby Walker With Toy Chest (Model H70310)
The Baby Walker with Toy Chest, model H70310, is a child walker designed to assist children with disabilities to walk while pushing a wheeled toy or carriage. The unit functions as a toy, therapeutic aid, and mobile toy box. A parking brake is included that allows the device to be useful for sitting. The walker consists of a plastic box with lid set in an epoxy-coated aluminum tube frame on four wheels with a sloped handle which is height adjustable from 23 to 27 inches. All of the wheels have s
Maddacomfort Walker And Crutch Hand Pads
The Maddacomfort Walker and Crutch Hand Pads are designed to provide cushioning for the hands of walker and crutch users. These washable terry cloth and foam pads wrap around standard walker handles or crutch hand grips and are secured by Velcro fasteners. DIMENSIONS: 6.5 x 6.75 inches.
Cane / Crutch Holder (Model 70324)
The Cane/Crutch Holder, model 70324, is a spring-loaded clip designed to grip any cane or crutch to a table, desk, or counter. The clip has a foam rubber pad on each side to keep it in place. The holder will accommodate shafts from 5/8-inch to 1-inch in diameter.
Playing Card Holder
The Playing Card Holder is a slotted holder designed so that cards can be added or removed easily. The holder is made of ABS plastic and is cleanable. The base of the holder has a small lip and extends far enough to hold a writing utensil. People with pain and/or limited use of their hands will find using this holder much easier than trying to hold multiple cards in one hand. The slot is designed so that cards can be easily added or removed. Also holds Mah-Jongg tiles, recipes or memos. Pencils
Cane Hand Loop (Model H70326)
The Cane Hand Loop, model F70326, is a wrist strap designed to prevent cane users from dropping their ambulation aid. The strap has a Velcro fastener which wraps around the cane shaft and slips over the wrist.
Gait Belt (Model H70402)
The Gait Belt, model H70402, is designed to allow a nurse, therapist, or attendant to guide an individual while walking. The belt has Velcro closure and one-inch wide webbing strap at the back which provides two "handles". DIMENSIONS: Available in lengths of 48 inches (model H70402-0048) and 60 inches (model H70402-0060). COLOR: Beige with dark brown strapping.
Have-A-Tray Carrier (Models 70612-3200/3400/6100)
The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds
Hand Grips (Model H70922)
The Hand Grips, model H70922, are hand exercisers designed to build a strong handshake, firm wrists or forearms. The device consists of contoured plastic handles and plated wire tension springs. Available with Medium (model H70922-0001), Heavy (model H70922-0001), or Extra Heavy (model H70922-0002) tension. These grips are sold in pairs.
Exer-Twist Exerciser (Model 70926)
The Exer-Twist Exerciser, model 70926, is an arm and hand exerciser designed to exercise the muscles of the hand, wrist and arm, and isometrically, the chest and shoulders. The device is used by twisting the two ends that fit together, like wringing a towel. Resistance is adjustable for progressive exercise. Extra pairs of larger snap-on grips provide extra support to hand structures or accommodate limited hand closure. DIMENSIONS: 7.75 inches long x 1.5 inches in diameter. Extra grips are 2 inc
Maddaplas Color-Coded Therapy Putty (Models H70935, H70936, & H70937)
Maddaplas Color-Coded Therapy Putty is designed for a variety of finger, hand, and wrist exercises. Therapy putty is recommended by therapists to improve finger and hand strength and movement after injury or surgery. This silicone putty will not harden or dry out. Four different consistencies (soft, medium-soft, medium, and firm) are color-colded and come in four sizes of resealable plastic containers of 2 or 6 ounces, and 1 or 5 pounds. COLOR: Yellow, Red, Green, and Blue.
Maddarest Sleep-Aid Bed Wedge (Model H76470)
The Maddarest Sleep-Aid Bed Wedge is a foam wedge cushion designed to provide firm support of the back, shoulders, and head, or may be used to elevate the lower extremities to relieve pain and discomfort. The cushion has a zippered, removable cover made of PVC-covered white nylon which is sanitized to guard against mildew and fungus growth. The cover may be machine washed and tumble-dried. DIMENSIONS: 27 x 27 inches with 1/2 inch thick at the low edge; the high edge is available in heights of 7
Speech Therapy Mirror / Felt Board (Model H71801)
The Speech Therapy Mirror/Felt Board, model H71801, is an unbreakable acrylic mirror designed to be an aid for the student, teacher, speech therapist, or pathologist in speech training, and to be useful for oral motor exercises that pertain to eating. A felt surface on the back serves as a board for use with felt or flannel visual teaching aids. The felt backing is supplied separately in a sheet for peel-off application. Word or picture cards can be clipped to the top edge of the board. The mirr
Hand Gym Exercise Unit (Model 70900)
The Hand Gym Exercise Unit, model 70900, is a therapeutic hand exerciser designed for use by individuals with rheumatoid arthritis, osteoarthritis, partial paralysis after stroke or who have had accidents, fractures, multiple sclerosis, or hand surgery. As a therapy tool, this triangular device helps to maintain dexterity and range of motion using isotonic, isometric, and resistive movements while the hand is positioned for optimal funcitoning. It may also be used to improve hand strength or agi
Hand Helper, The
The Hand Helper is a hand and finger exerciser designed for restoring hand and forearm muscles and tendons for improved mobility. The device consists of a rectangular plastic frame with a sliding roller bar which uses rubber bands to provide resistance. A wide range of tension values can be obtained by changing, adding, or removing the bands. A spacer bar is provided for large and small hands. Progress may be measured by calibrations on the frame. DIMENSIONS: 5 x 5 5/8 inches.
Wheelchair Dust Covers (Models F70651-0036 & F70651-0048)
The Wheelchair Dust Covers are clear vinyl covers with cotton bindings designed to protect chairs from dust and dirt when not in use. DIMENSIONS: Model F70651-0036 is 36 x12 x 36 inches; model F70651-0048 is 34 x 12 x 48 inches. Any size of cover can be made to order.
Suppository Inserter (Model H72514)
The Suppository Inserter, model H72514, is designed to simplify bowel care for quadriplegics and other paralyzed individuals with hand and arm involvement. The inserter is made of smooth Delrin plastic with a polyethylene collar to reduce the shock normally experienced from cold metal devices. The inserter has a hollow area for the suppository mounted against a weak spring. The mounting of the inserter is chrome-plated steel, adjustable to the hand an fitted with a Velcro closure strap with plat
Anus Stimulator (Model H72512)
The Anus Stimulator, model H72512, is designed for persons with spinal cord injuries and other paralyzing conditions to assist in regular bowel function by direct mechanical stimulation of the rectum. The stimulator can be used by individuals with flail hands and fingers. The device consists of a rectal probe made of Delrin plastic which reduces the shock normally experienced from cold metal devices. It has a polyethylene collar which is adjustable to shorten the depth of the probe. The adjustab
Tall-Ette Ii Maddacomfort Elevated Toilet Seat With Lok-In-El Bracket (Models 72584, 72585, & 72586)
The Tall-Ette II Maddacomfort Elevated Toilet Seat with Lok-in-El Bracket are toilet seat attachments designed to provide 2 (72584), 4 (72585), or 6 (72586) inches of additional height to the seat level. The seats have a high back and are contoured to provide hip comfort and security and to place the body in an ideal position. The front is open. A recessed hand grip on the front edge allows for facilitated installation, transport, and removal. WEIGHT: 2.25 pounds (72584), 3.5 pounds (72585), and
Exer-Grip Hand Exerciser (Model 70914)
The Exer-Grip Hand Exerciser, model 70914, is a rubber device designed to offer moderate resistance when squeezed. The exerciser is made of molded, dense polyurethane foam with four finger notches. DIMENSIONS: 4 x 2.5 x 1.5 inches.
Melaware Eating Aid Cup (Model H74513)
The Melaware Eating Aid Cup, model H74513-0000, is a pedestal cup designed for persons with limited grasping ability. The design of the cup allows the user to slip the thumb and index finger around the cutout at the base, which rests against the palm of the hand to stabilize the cup when drinking. CAPACITY: 6.5 ounces.
Shampoo Rinse Tray (Model F76428)
The Shampoo Rinse Tray, model F76428, is a basin made of polyethylene designed for hair washing, ear irrigations, or scalp treatment of individuals who mush remain in bed. The one-piece, leak-proof tray has a neck rest and high walls to reduce splasing. The side drain has a 0.75-inch drain hose and sliding shut-off clamp. The drain may be kept open for continuous rinsing or closed for soaking. DIMENSIONS: 21.5 x 18.5 x 6 1/8 inches. WEIGHT: Shipping weight is 6 pounds.
Blanket Lift Bar
The Blanket Lift Bar is a blanket support designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. The device is made of epoxy-coated steel wire. The frame is inserted between mattresses to give support and a free space.
Ableware One-Hand Cutlery Set (Model H746100000)
The Ableware One-Hand Cutlery Set, model H746100000, is designed for persons with the use of only one hand. This combination knife and fork can be used with either hand. When pushed down onto the food, the four-tined fork retracts up inside the three-sided box knife. The knife then cuts a bite-sized piece of food. When pressure is released, the spring-mounted fork emerges from the knife with the food. A raised lip guard on the fork section protects lips from the knife edges. All parts may be dis
Maddadapt Built-Up Handle Cutlery (Models 74620 To 74624)
The Maddadapt Built-Up Handle Cutlery set are utensils with enlarged circumference handles for facilitated grip. The functional components are stainless steel and the handles are plastic. Removable, adjustable rings on the handles give support against individual fingers. The handles are hollow so that non-toxic materials or weights can be added when necessary. Each of the utensils from the set (74624) may be purchased individually: Teaspoon (74620), Soup Spoon (74621), Knife (74622), and Fork (7
Perma-Ty Elastic Shoelaces
The Perma-Ty Elastic Shoelaces are designed for individuals who have trouble tying laces due to loss of finger dexterity or the ability to bend over. These laces require tying once; afterwards, the laces stretch so that the foot can slip into and out of a shoe with the aid of a shoehorn but without having to untie the laces. DIMENSIONS: 18 inches long for shoes with 2 or 3 holes; 24 inches long for shoes with 4 to 5 holes; and 30 inches long for shoes or boots with 6 or more holes. COLOR: White
Mounted Jar Opener (Model F75346)
The Mounted Jar Opener, model F75346, is designed to provide a convenient way to open any screw-type jar lid from 3/8 to 3 3/8 inches in diameter with one hand. The devices may be mounted to the underside fo any shelf or cabinet. The device is made of glass-filled nylon with a knurled hardened steel gripper, needs no adjustment, and has no moving parts. DIMENSIONS: 6 x 3.5 x 5/8 inches.
Bath Pillow (Model 72739)
The Bath Pillow, model 72739, is made of plastic foam that is hygienic, oderless, non-absorbant, and cleanable. The pillow has three suction cups to hold it in a fixed position. DIMENSIONS: 12 x 8.5 x 1.25 inches. WEIGHT: 8 ounces.
Maddadapt Self-Leveling Swivel Utensils (Models H74627, H74628, & H74629)
The Maddadapt Self-leveling Swivel Utensils are designed so that the eating implement always remains upright when placed into the mouth, even if the hand is raised at a steep angle. The utensils are made of stainless steel mounted by a swivel pin to a built-up handle. Double stops prevent excessive swing. A fork (model H74627), teaspoon (model H74628), and soup spoon (model H74629) are available, and all are dishwasher safe.
Easi-Grip Scissors (Model F75800)
The Easi-Grip Scissors are scissors with voluntary opening action designed for individuals with little or no finger strength or manual dexterity. These all-purpose scissors close with a light sqeeze and open up automatically by means of a built-in plastic spring. The scissors may be used with either the right or left hand and feature stainless steel blades and molded-on nylon spring handles. A hang-up holder/blade protector is also included. Three models are available: model H75800-001 has round
Maddadapt Comb And Brush On Handle (Models F74125 & F74130)
The Maddadapt Comb and Brush on Handle are grooming instruments mounted on extra long handles designed for individuals with upper extremity motion limitations. The plastic comb (model F74125) and nylon bristle brush (model F74130) are affixed on an aluminum tube with a thumb screw-tightened swivel for angle adjustment. The tube has a built-up plastic handle. DIMENSIONS: Tube is 20 inches long; handles are 4.5 inches long and 7/8 inches in diameter.
Keep-Warm Dish (Model F74521)
The Keep-Warm Dish, model F74521, is a food warmer dish designed for individuals who take a little longer to finish a meal. The device consists of a bowl-shaped chamber with a plate lid with high sides. The chamber is filled with hot water which surrounds the lid dish and keeps food warm. The warmer features a port hole to add or drain water, and two handles on the sides. CAPACITY: Dish lid holds 22 ounces of food. DIMENSIONS: 2 x 8 inches in diameter WEIGHT: 2 pounds when filled with water.
Inner Lip Plate Dinnerware (Model F74530)
The Inner Lip Plate Dinnerware, models F74530 and F74531, are plates designed to assist individuals in self-feeding by featuring a deep inner lip which holds food on the plate while the user brings the fork or spoon to the edge of the plate to push the foon onto the utensil. The inner lip also helps to prevent spills. Available in polypropylene or ceramic. DIMENSIONS: All plates are 9.5 inches in diameter. COLOR: Off-white ceramic; blue, off-white, or gold polypropylene.
The Tip Cup is a weighted cup designed to right itself automatically if knocked over or set down on an angle. The cup has two handles, a weighted base, and rounded corners. The cup comes with two spill-proof lids: one is clear and dish-shaped with two holes to let fluid flow into the dish for drinking; the other lid is molded polyethylene and has a raised mouthpiece. The 6.5-ounce cup may be washed in warm water.
Transparent Mug With Drinking Spout (Model F74596)
The Transparent Mug with Drinking Spout, model F74596, is a drinking cup with a wide base, two handles, and a lid with a drinking spout designed to let air slowly into the mug as the user is drinking from it. The mug may be used with or without the lid. Both pieces are dishwasher safe. CAPACITY: Holds 8 ounces. DIMENSIONS: Overall width is 5.1 inches across the handles; height, including spout, is 3.9 inches.
Wheelchair Carry-All (Model 70616)
The Wheelchair Carry-All, model 70616, is a back pouch designed to attach to the handgrips of wheelchair push handles. This bag is made of waterproof denim with a rigid bottom liner and webbing straps. The caddy has a full-width pocket inside and a top flap that has a Velcro closure. DIMENSIONS: 14 x 14 x 4 inches.
Car Slide (Model 70406)
The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces.
Glossectomy Feeding Spoon (Model H74675)
The Glossectomy Feeding Spoon, model H74675, is designed for persons who have had surgery of the tongue. The device consists of a crescent shaped pusher which delivers food from the bowl of the spoon when the operating knob is pushed. The entire spoon is made of stainless steel, and may be totally taken apart for cleaning and sterilizing. DIMENSIONS: 6.5 inches long; the bowl is 1 inch wide x 1 1/8 inches long.
Sliding Board (Models H70405-0000 & F70405-0001)
The Sliding Board is a transfer aid for use between a wheelchair and a bed, commode, toilet, chair, etc. The board is available in two models: hardwood and plastic. The hardwood board (model H70405) is made of 1/2-inch thick nominal hardwood with end cutouts to facilitate gripping. The plastic board (model F70405-0001) is molded of high-impact plastic with ribs for maximum beam strength. DIMENSIONS: Hardwood model is 8 x 30 inches; plastic model is 8 x 27 inches. WEIGHT: Hardwood board weighs le
Maddawalker Knee Walker (Model H70412)
The Maddawalker Knee Walker, model H70412, is a knee scooter designed to encourage children 2 to 5 years old to gain mobility by walking on their knees to facilitate a transition from crawling to walking. The device may aid the development of a child's hip and trunk musculature by stabilizing the hips and maintaining proper trunk alignment. The device consists of two separate knee scooters joined by a locking roller and track to provide a smooth alternating forward movement. Once in position, th
Utility Clamp For Wheelchair Accessories (Model H70673)
The Utility Clamp for Wheelchair Accessories, model H70673, is a mounting clamp that attaches to the frame of wheelchairs 7/8-inch in diameter. A thumb screw holds the clamp securely. A parallel hole accepts a 3/8-inch diameter rod, and the set screw is turned with a knurled knob. The clamp is made of ABS plastic.
Tilt-A-Tray Adjustable Wheelchair Tray (Models H70670-0000 & H70670-0001)
The Tilt-A-Tray Adjustable Wheelchair Tray is a swing away lapboard designed to adjust vertically and tilt forward and back. The tray is attached to the wheelchair frame and swings away for access to the chair seat. The tray is made of clear polycarbonate and has front and rear edge bars. The right side is mounted to a hinged bar and the left side is held by suction cups mounted to adjustable bars. Fittings are molded of high-strength ABS plastic. Extension rods and braces are made of stainless
Universal Support Arm (Usa) (Model F70660)
The Universal Support Arm (USA), model F70660, is an extension arm for wheelchair accessories that clamps to the wheelchair's tubing. The basic arm is made of telescoping aluminum tubing that allows rotational and axial adjustment. Tube collars clamp by integral locking knobs. Angle adjustments are made at two U-clamp joints. Knobs are also used to lock the holder at any angle. The arm has a camera support with a 1/4-20 thread that fits standard 35mm camera thread wells. Included is a hardware p
Wheelchair Tray (Model H70601-0015)
The Wheelchair Tray, model H70601-0015, is a formica lapboard designed to be attached to either side of a wheelchair with Velcro fastening straps. This rigid tray has a non-glare surface, a cutout, and a channel around its perimeter to catch spills. The edges are protected by smooth plastic molding. DIMENSIONS: Tray is 24 x 19 inches. WEIGHT: Shipping weight is 8.3 pounds.
Card Holder (Model H71254)
The Card Holder, model 71254, is a hand held device designed to assist individuals who lack finger strength or dexterity to hold a hand of cards. The holder consists of two plastic disks with foam pads in between that allows cards to be added or removed without disturbing the other cards. Sold in boxes of 4 holders. WEIGHT: 1/2 ounce.
Card Shuffler, Battery Powered (Model F71257)
The Card Shuffler, model 71257, is a battery powered device designed to shuffle cards mechanically for persons with arthritis, injury, poor hand strength, or manual dexterity. By pressing a lever, thie device shuffles one or two decks of cards and deposits the cards in a removable central bin. POWER: Two "C" size alkaline-type batteries (not included). DIMENSIONS: 8 x 4.25 x 3.5 inches.
Door Pulley, The (Model H70908)
The Door Pulley, model H70908, is an overhead pulley exerciser designed for upper extremity exercises. The device is easy to set up and remove; it fits over the top edge of any door up to 1.75 inches thick. Rubber bumbers protect the door's surface. A 1.75-inch diameter, low friction plastic swivel and pulley, two hand stirrups with wood grips, and a high strength rope are included. The plated metal frame extends out 15 inches from the door. WEIGHT: Shipping weight is 3 pounds.
The Textured Ring is a hand exerciser with eight rows of soft protrusions designed for use by individuals with disabilities of the hand and fingers. The ring may be useful for hand exercises involving squeezing, pulling, or twisting. DIMENSIONS: 7 inches outside diameter, 1.5 inch inside diameter, and 1.25 inches thick.
Ableware Built-Up Handle Angle Cutlery With Adjustable Grip Rings
The Ableware Built-up Handle With Adjustable Grip Rings are stainless eating utensils with polypropylene handles with space inside to add weight. The handles are molded, autoclavable, and dishwasher safe. The handles are also equipped with three movable grip rings. The rings slide to provide support against the users fingers for maximum comfort. The cutlery includes a teaspoon, soup- spoon, knife, fork, or a set of four (teaspoon, soupspoon, knife, fork). DIMENSIONS: 7/8 diameter x 4.5 long inch
Adjustable Wall Mirror (Model 72715)
The Adjustable Wall Mirror, model 72715, is designed for wheelchair users. The mirror can be adjusted from vertical to 40 degrees below vertical. THe mirror is made of unbreakable plastic, and adjustments can be made by turning a knob on a 20-inch aluminum rod. A universal joint allows operation from any angle. The metal bracket is epoxy coated. DIMENSIONS: 12 x 16 inches. WEIGHT: 5 pounds.
Newspaper Holder (Model 73210)
The Newspaper Holder, model 73210-0000, is designed for holding a newspaper open for hands-free reading. The holder can be used on a bed or wheelchair tray. A center clip holds the top of the paper while flat strips support the edges for full open display. The bottom of the holder has an integral formed spring clip for table mounting. DIMENSIONS: 28 inches long overall. WEIGHT: 1.5 pounds.
Clavies Autoclave Gloves (Model H78927)
The Clavies Autoclave Gloves, model H78927, are pliable all-cotton gloves designed for handling hot objects out of the oven. The gloves have a 5-inch gauntlet and are heat resistant up to 450 degrees Fahrenheit. The gloves are made of a terry cloth knit and are washable. COLOR: Bright orange.
Sensory Evaluation Kit (Model 71824-0001)
The Sensory Evaluation Kit, model 71824-0001, is a perceptual training activity and sensory integration evaluation system designed to measure the degree of deficit in any of the senses separately or in combination. The kit consists of sets of 27 differently scented "scratch and sniff" sheets. The sheets are each divided into 6 squares that, when cut out, are placed into the 27 screw-cap jars provided. In use, one of the squares is put on top of the jar cap and replaces when depleted of scent. 27
Potti Shower (Model 72628) & Tall-Ette Perineal Cleaner (Model F72629)
The Potti Shower Toilet Perineal Cleaner, model 72628, is a plastic spray device that attaches to the bottom of the toilet seat to provide cleansing water spray to the anal and genital area. The device can be swivelled out of the way when not in use. A flexible tube 12 feet long links the device to the bathroom sink faucet. A diverter valve with push button operation connects to the faucet but does not interfere with sink operation. The Tall-Ette Potti Shower Perineal Cleaner, model 72629, is th
Handy Aid Gripper (Model F75358)
The Handy Aid Gripper, model F75358, is a jar opener made of flexible rubber. This disk with non-slip texturing on both sides allows for a firm grip on jar lids, salt shakers, fuses, radiator caps, etc. The device also offers protection from sharp edges and provides a grip on tool handles, and can be used as a non-slip pad under vases or bowls. DIMENSIONS: 4 7/8 inches in diameter.
Ableware Pot And Pan Holder (Model H753430000)
The Ableware Pot and Pan Holder, model H753430000, is designed to keep pots and pans steady on the stove so that individuals with the use of one arm can stir or dish out the contents of the container. The device consists of a plastic coated steel wire frame with three suction feet. It holds the handle of the pot or pan to prevent movement while thecontents are being stirred. DIMENSIONS: 16 x 4.5 inches. WEIGHT: 1 pound. WARRANTY: 12 months parts and labor.
Slicing Knife (Model H75326)
The Slicing Knife, model H75326, is a serrated kitchen knife with a vertical grip handle. The knife has a 9-inch steel blade that tapers to a point, and a plastic handle.
Bread Slice Holder (Model H75325-0000)
The Bread Slice Holder, model H75325, is a small plastic board designed to assist individuals with the use of only one hand to spread butter, jelly, etc. on a piece of bread, and to cut it. The device has two raised edges and rubber feet. DIMENSIONS: 5.5 x 5.75 inches. COLOR: White.
Slicing Frame (Model H75327)
The Slicing Frame, model H75327, is a cutting guide designed to assist in cutting food items straight, or with the use of only one hand. The frame is made of plastic and adjusts for six slice thicknesses from 1/16 to 1 inch. DIMENSIONS: 13.75 x 5 3/8 x 5.75 inches.
Hot Hand Hand Protector
The Hot Hand Hand Protector is a heat protection device and jar opener designed for maintaining a secure grip on hot or cold slippery items such as glasses, pans, cups and to aid in opening jars with screw tops. The protector is made of flexible silicone, and this pad has end pockets to fit the thumb and fingers. The gripping surfaces are studded with numerous small suction cups. The device will retain its flexibility over a temperature range from -70 degrees to 500 degrees Fahrenheit. Hole tabs
Wall Switch Extension Handle
The Wall Switch Extension Handle, model F754141000, is a plastic device designed to assist wheelchair users or persons with limited arm movement to operate standard height light switches. The handle attaches to the any standard toggle-type wall switch, and allows it to be flipped by pushing or pulling on the unit.
Universal Tall-Ette Carry Bag (Model H72593-0005)
The Universal Tall-ette Carry Bag, model H72593-0005, is a carrying case for any of the Tall-ette elevated toilet seats. This case is made of denim with bound and sewn seams. A full zipper opens the bag so the seats can be moved without difficulty. A wide-loop denim carrying handle allos for hand or arm carrying.
Tall-Ette III Arthro Elevated Toilet Seat With Lok-In-El Bracket (Models 72590 & 72592)
The Tall-Ette III Arthro Elevated Toilet Seat with Lok-in-El Bracket is designed for persons who are recovering from hip-pinning, pelvic arthroplasty, a fractured pelvis, or broken leg, as well as those afflicted with arthritic knees and hip or spine problems. One side of the seat is level to provide adequate seating support; the other side is sloped forward and down to accommodate the needs of those who must avoid bending a leg. The seat adds 4-inches of height to the seating level.
Extra Wide Tall-Ette Toilet Seat (Model F725891000)
The Extra Wide Tall-Ette Toilet Seat, model F725891000, is a wide, molded plastic elevated toilet seat with an attached safety frame. The extra-wide seat has contoured soft foam Madda-Comfort armrests for assistance when sitting and rising. The unit can be installed permanently with the included bolt-down Lok-In-El bracket. The seat adds 4 inches of height and can be used with standard or elongated toilets. DIMENSIONS: 22.5 x 16 x 28 inches; distance between bars is 19.5 inches.
Hole-In-One Key Holder
The Hole-In-One Key Holder is a key holder designed for individuals with arthritis or limited hand mobility/strength. This key holder provides a rigid handle for extra leverage when turning keys, as well as several grasping positions: Users can either slide their fingers through the hole in the center of the handle or grasp the entire handle. Chrome-plated screws hold up to two keys, and the keys can be folded back into the inner curved side of the plastic holder when not in use. This holder can
Maddadapt Built-Up Handle Angle Cutlery (Models F74636 To F74637-0001)
The Maddadapt Built-Up Handle Angle Cutlery are adapted eating utensils designed for facilitated use by persons with limited wrist movement and grasping ability. These utensils feature angled forks and spoons for either the right- or left-handed user, and adjustable, removable rings on the handles to give support against individual fingers for maximum comfort. The plastic handles are hollow to allow weights to be added when necessary. Eating components are made of stainless steel, and the entire
Beeson Automaddak Feeder (Model H74501)
The Beeson Automaddak Feeder, model H74501, is a powered feeder for persons with severe physical limitations due to cerebral palsy, spinal cord injury, or other disabilities involving movement, coordination, or range of motion. This electrically operated automatic feeder places a spoonful of food close to the mouth. Control pads are mounted near the top for use with a headstick, and may be relocated, if necessary. One control operates a spoon which takes food from a Pyrex glass plate and raises
Rocker Knife (Model H74661)
The Rocker Knife, model H74661, has a curved 6-inch steel blade to facilitate cutting meet with one hand. The utensil features a 4.5-inch maple handle.
Non-Skid Inner Lip Plate Dinnerware (Model H74532)
The Non-Skid Inner Lip Plate Dinnerware, model H74532, is a plastic dinner plate with an undercut lip on the inside of the rim to assist placing food on a utensil. The plate also features a 6-inch diameter foam rubber disk on the bottom to keep the plate stationary while eating. The dish is dishwasher safe. DIMENSIONS: 9.5 inches in diameter, 1/2 inch high, with a 1-inch rim. COLOR: Off white.
Skidtrol Non-Skid Dinnerware (Model H74504)
The Skidtrol Non-Skid Dinnerware is a set of non-skid plates and bowls designed to eliminate accidents caused by sliding dishes. These molded melamine plates, bowls, and cups have non-skid rings on the bottom to prevent sliding even on an incline. All pieces are dishwasher safe. Each piece is available separately: Dessert/Salad Plate (H74504-0001), Cereal Bowl (H74504-0003), 9-ounce Drinking Cup with Handle (H74505-0004), and 14-ounce Transparent Tumbler (H74504-0005). DIMENSIONS: Dessert plate
Melamine Scooper Dishes
Melamine Scooper Dishes are designed for use by persons with limited upper extremity muscle control or with use of only one hand. These dishes have contoured lips to help in scooping food onto utensils. The oval shaped dishes are dishwasher safe, made of break-resistant melamine, and feature decorator patterns. The dishes are available with or without self-adhesive Skidtrol non-skid neoprene foam. DIMENSIONS (LxW): 6 x 5.5 (Scooper Bowl), 7.5 inches x 6 inches (Medium Dish), and10 inches x 8 i
Scooper Bowl & Scooper Plate
The Scooper Bowl and the Scooper Plate are designed for use by individuals with use of only one hand or with other upper extremity disabilities. The hemispherical bowl has a high return curve on one side to aid in scooping food onto utensils. A removable rubber ring on the base prevents the bowl from sliding during use. The bowl changes color when food is too hot. Made of heat-resistant plastic, the dishwasher-safe Scooper Plate (not shown) features a flat bottom, a high rim, and a reverse curve
No-Tip Cup Keeper
The No-Tip Cup Keeper is a no tip glass hoder designed for use by individuals with upper extremity disabilities. This plastic base is designed to prevent drinking cups from tipping over. The wide base has a trough that fits the Little Spill Cup (not included; see entry) all Flo-Trol cups (not included; see entry), and other cups of similar diameters. The device is made of polyethylene. DIMENSIONS: Base is 4 7/8 inches in diameter.
Feeding Cup (Model H74595)
The Feeding Cup, model H74595, is a 7-ounce cup featuring a cross dam near the nozzle to prevent contents from spilling when the cup is tilted forwards for drinking. Side handles provide a secure, two-handed grip. DIMENSIONS: Cup is 3.5 inches in diameter x 1.5 inches deep; nozzle has a 7/16 inch inner diameter.
Anti-Spill Drinking Cup (Model F74547)
The Anti-Spill Drinking Cup, model F74547, consists of a drinking cup and holder that attaches to any flat surface with Velcro strips. The 8-ounce plastic cup features an open handle and a snap-in top with 1-inch wide hole for sipping. This top piece is reversible for use by left-handed individuals. The cup fits into the supporting well which has a disc of Velcro fastener hook material attached to the bottom. Two 1.5-inch strips of Velcro fastener loop material are supplied for attachment to any
Maddadapt Built-Up Afro Pick (Model 74116)
The Maddadapt Built-Up Afro Pick, 74116, is an afro comb with an enlarged plastic handle for facilitated grip.
Maddadapt Comb (Model 74117)
The Maddadapt Comb, model 74117, is a fine tooth comb with a built-up plastic handle for facilitated grip.
Denture Brush In Holder (Model F74153)
The Denture Brush in Holder, model F74153, is designed for one-handed cleaning of dentures. The device consists of a plastic base mounted on two suction holders, with a two-sided denture brush set in it vertically. DIMENSIONS: Base is 4 x 2.25 inches.
Nail Care Combination Set (Model H74141-0110)
The Nail Care Combination Set, model H74141-0110, is a two-in-one aid for fingernail care designed for persons who cannot grasp and use standard nail clipper implements. The set is mounted on a smoke-colored Plexiglas base with non-skid feet. The stainless stell trimmer clips nails with a simple push of a lever, and an embery board is held in a spring clip for one-hand nail filing. Two emery boards are included.
Finger-Fitting Fingernail Clipper (Model F74137)
The Finger-Fitting Fingernail Clipper, model F74137, is a nail care aid designed for individuals with limited finger dexterity or strength. This standard finger nail clipper features finger ring mounts to keep the clipper in the proper position in the hand during use. A standard nail file is included.
Grip Ball (Model H70856)
The Grip Ball, model H70856, is a small ball with a soft but firm texture designed to provide a substantial and variable gripping area for hand exercise and amusement. The ball is made of molded ribbed poly-vinyl chloride. The ball squeaks when squeezed. DIMENSIONS: 3.5 inches in diameter.
Corner Seat (Model 72140)
The Corner Seat, model 72140, is designed to facilitate normal sitting patterns inchildren aged 2 to 8 years old who need positioning while sitting. The seat places the hips lower than the knees to interrupt abnormal muscle tone, encourages legs to roll outward for stability, and keeps the back straight to prevent rounding. It also has an abduction pommel built into the front for knee separation. The seat may also be useful with spastic and athetoid children. The chair is made of canvase stretch
Maddak Standing Frame, Small (Model H70425)
The Maddak Standing Frame, Small, model H70425, is a standing platform designed for small children with severe physical limitations. The standing frame permits many types of play activities as well as table work, while providing the child with the benefits of lower extremity weight bearing. The frame may be especially beneficial for children with cerbral palsy or other disorders affting gross motor development. This supporting device will adapt to individual children from about 1 to 7 years old
Bowling Ball Pusher (Model H71205)
The Bowling Ball Pusher is designed to assist individuals with limited use of their arms or legs to bowl from either a standing or seated (wheelchair) position. There are two models of pushers: Model H71205-0000 is made of plated steel and aluminum with plastic ball caps to protect the floor surface. The handle lengthens for use and shortens for transport or storage. Model H71205-0001 has a triangular base, the bottom edge of which is sheathed in a plastic ribbed coil to protect the floor from s
Holder For Crocheting, Embroidering, And Darning (Model H75438)
The Holder for Crocheting, Embroidering, and Darning, Model H75438, is a clamp-on needlework hoop designed to provide one-hand use to assist individuals with the use of only one hand or with limited manual gripping strength. The holder has a fexible gooseneck which clamps onto a table or tray, allowing it to be raised, lowered, turned, or placed in any position. A darning knob screws into the top and also holds an embroidery frame or any crochet needle in a cross hole.
Maddadapt Flexible Mount Mirror (Model H74102)
The Maddadapt Flexible Mount Mirror, model H74102, is a hand-held inspection mirror designed for use by paraplegics and others who are susceptible to pressure sores. The mirror may be used to inspect pressure points so that they may be treated before developing into serious decubitus ulcers. The mirror can also be used as a grooming aid. The oval-shaped mirror is made of unbreakable plastic. The gooseneck rod is chrome-plated and mounted on a plastic handle with an adjustable hand strap. DIMENSI
Catheter Connector (Model 72940)
The Catheter Connector, model 72940, is a tapered, polyethylene plastic joint designed for easy hook-up of a Foley retention catheter to a leg bag. One end fits into the catheter tube and the other end into the leg bag tube. Both ends of the fitting are tapered from .25 to 5/16 inches O.D. Persons with minimum strength should be able to use this connector. Packed one dozen connectors to a bag.
Catheter Clamp (Model 72942)
The Catheter Clamp, model 72942, is made of acetal plastic and has serrated jaws 1 1/16 inches long. The clamp has a positive lock and springs open when released to allow one hand use. Sold in packages of 1 dozen. DIMENSIONS: Overall length is 2 5/16 inches.
Food Cutting Board (Model H75332)
The Food Cutting Board, model H75332, is designed to assist individuals with the use of only one hand to cut and slice food items such as meet, bread, cheese, fruit, etc. The board is made of polyethylene, which resists bacteria contamination, and has four vertical stainless steel pins for holding itms while buttering or slicing. The board features a lightly textured, non-slip surface that is cleanable and heat resistant up to 190 degrees Fahrenheit, a slot-type hand with hole for hanging, and f
Folding Bookholder (Model 73228)
The Folding Bookholder, model 73228, is a plastic device designed to hold books at a fixed angle. The device has saw tooth brackets at base to stop the pages from accidentally turning. DIMENSIONS: Open, the device is 10 x 8 x 6.5 inches; closed flat the holder measures 8.5 x 1.75 x .75 inches. WEIGHT: 2 ounces.
Matey Bantam Reaching Aid (Model F76950)
The Matey Bantam Reaching Aid, Model F76950, is an aluminum reacher with pistol trigger hand grip and jaw-style opening. The device features a voluntary closing action; pressure must be maintained to continue grip.
Wheelchair Wedge Cushion (Model H76670)
The Wheelchair Wedge Cushion, model H76670, is designed for placement in a wheelchair with the high edge forward to prevent the user from sliding off. In a reversed position, the high edge in the back assists rising. Ties at all four corners secure the cushion to the wheelchair frame. The polyurethane foam cushion has a denim cover with a zipper for removal and laundering. DIMENSIONS: 16.5 x 16.5 x 4.5 inches.
Matey Ranger Reaching Aid (Model F76951)
The Matey Ranger Reaching Aid, model F76951, is an aluminum reacher with pistol trigger hand grip and jaw-type opening. This device features a voluntary closing action; pressure must be maintained to continue grip. DIMENSIONS: 32.5 inches long with 2.5-inch maximum grip. WEIGHT: 8 ounces.
Matey Pocket-Fold Reaching Aid
The Matey Pocket-Fold Reaching Aid, model F76954, is a folding aluminum reacher with pistol trigger hand grip and jaw-type opening. This device features a voluntary closing action; pressure must be maintained to continue grip. A magnet at the tip aids in picking up small metal items. DIMENSIONS: 22 inches long when open; folds to 12.5 inches. 2.5-inch maximum grip. WEIGHT: 6 ounces.
High Seat Cushion (Model F76666)
The High Seat Cushion, model F76666, is a foam seat cushion designed to take stress off the legs and knees by raising the seat to a comfortable level. The cushion is made of firm, 6-inch thick polyurethane foam, and comes with a denim cover with a cloth handle and zipper for removal. DIMENSIONS: 15 x 15 inches.
Wheelchair Cushion (Model F76654-0003)
The Wheelchair Cushion, model F76654-0003, is a foam seat cushion made of polyurethane foam. The cushion has a removable cover made of PVC coated white knit nylon iwth a cotton binding. The material is sanitized to guard against mildew and fungus growth. The cover is machine washable and may be tumble dried. DIMENSIONS: 18 x 16 x 3 inches.
Invalid Ring (Model F76650)
The Invalid Ring, model F76650, is a foam ring seat cushion designed to take pressure off the tailbone of the user. The cushion is made of polyurethane foam which is hygienic, non-allergenic, and will not support bacteria. The cushion may be hand washed and cold sterilized. DIMENSIONS: 12.5 x 15 x 2.75 inches. COLOR: White.
Pouch Type Arm Sling (Model F78459)
The Pouch Type Arm Sling, model F78459, is designed to support and immobilize an injured limb. The sling extends from elbow to wrist, and is made of sewed denim with a 1-inch wide web strap. The strap is adjustable with plated metal buckles and has a polyurethane pad to provide maximum weight distribution of the limb. This sling is washable. DIMENSIONS: 15 inches long.
The Ergo Cup is a cup with a large handle designed for use by individuals with grasping, fine motor, cognitive or upper extremity disabilities or arthritis. This ergonomically designed cup features a grooved gripping surface for ease in handling and a small finger rest opposite the handle to provide added stability and help reduce spilling. The cup holds 9.5 ounces of cold or hot beverage. It is dishwasher and microwave safe. An optional wide spout lid (see separate record) is available. COLOR:
The Ergo Plate is a high side plate designed for use by individuals with the use of one hand, fine motor, upper extremity or eating disabilities. Designed to help prevent spillage of food over the side of the plate, this ergonomically designed plate has high sides and a wide rim against which food can be pushed onto cutlery. Other features include a slightly sloped base that keeps liquids and small particle foods contained in one spot. The plate is made from durable polycarbonate with a textured
The Ergo Lid is a lid for a cup with a spout designed for use by individuals with swallowing disabilities or other upper extremity disabilities. Designed to be used with the Ergo Cup (see separate entry), this lid features a large angled spout to prevent spillage. The lid is dishwasher- and microwave-safe. COLOR: White.
Ableware Food Bumper
The Ableware Food Bumper is a food guard designed for use by individuals with upper extremity or neurological disabilities, stroke, cerebral palsy, or upper extremity amputation who want to use conventional tableware, but have difficulty getting food onto utensils and keeping food on the plate. These sanitary food bumpers clip onto any circular dinner plate 9 to 11 inches in diameter and provide walls against which food may be pushed onto forks or spoons. The plastic walls also prevent food from
Ableware Crutch Bag
The Ableware Crutch Bag is a carrying bag for a crutch designed for use by individuals with walking or balance disabilities. This carrying bag has a deep pocket for carrying personal items, and a smaller front pocket that provides storage for items such as cell phones, wallets or keys. The bag attaches to the side of the crutch and will not interfere with movement. This bag can also be used with walkers. The bag can be machine washed and dried. DIMENSIONS (LXWxD: 9 x 6.5 x 2 inches. COLOR: Blac
Playing Card Holder
The Playing Card Holder is a playing card holder designed for use by individuals with low vision, arthritis, or fine motor or grasping disabilities. This clear acrylic holder holds cards snugly in an upright position. The unit can also be used with recipe cards and instructions. Pencils or small coins can fit on the extended front of the holder. DIMENSIONS: 10 inches long. WARRANTY: 12 months on parts and labor.
Extra Wide Tall-Ette Elevated Toilet Seat With Steel Legs (Model F725882000)
The Extra Wide Tall-Ette Elevated Toilet Seat with Steel Legs, model F725882000, is a wide height adjustable toilet seat with an attached safety frame designed for use by heavy individuals with balance or mobility disabilities. The molded plastic elevated seat has attached steel armrests covered with soft contoured foam to assist the user in sitting down or rising from the seat and four steel height-adjustable legs with rubber tips. The unit comes with a Bolt-Down Lok-in-El Bracket. DIMENSIONS (
Extra Wide Tall-Ette Elevated Toilet Seat With Aluminum Legs (Model F725881000)
The Extra Wide Tall-Ette Elevated Toilet Seat with Aluminum Legs, model F725881000, is a wide height adjustable toilet seat with an attached safety frame designed for use by individuals with balance or mobility disabilities. The molded plastic elevated seat has attached aluminum armrests covered with soft contoured foam to assist the user in sitting down or rising from the seat and four aluminum height-adjustable legs with rubber tips. The unit comes with a Bolt-Down Lok-in-El Bracket. DIMENSION
Hand Band Grip Enhancer
The Hand Band Grip Enhancer is a hand grip designed to help individuals with grasping disabilities, limited hand strength, arthritis, or upper extremity disabilities to grasp a cane, walker, or rollator handle securely. The band attaches to a handgrip of walker or a cane shaft, using the attached hook and loop fastener. By placing the fingers in the band, the user gets a better grip. The elasticity in the band provides greater control and ensures a secure grip. This device is also useful for pro
Maddak Eating Plastic Coated Spoons,Model H746320001
The Plastisol Coated Teaspoon and Soup Spoon are plastisol coated spoons designed for use by individuals with limited hand dexterity or neurological, grasping or eating disabilities. The spoon handles are made of stainless steel and the spoon bowls are coated with non-toxic plastisol. The plastisol coating is intended to protect the teeth, gums and lips of users who tend to have difficulty or have stabbing or jerky motion getting eating utensils to their mouths or involuntary biting down on the
Morph™ Wheels are a foldable wheelchair wheels for use by people who use wheelchairs. Winner of the Medtrade 2013 Innovation Award and the London Design Museum 2013 Product of the Year in Transportation, Morph™ Wheels are the world's first foldable wheelchair wheel available on the market for purchase. They allow users to travel in cars, trains and airplanes without being limited by storage space (they fit in overhead storage compartments). Users can change these tires without complex tools. Mor
Ableware Stay Bowl
Stay Bowl is a non-skid bowl with handle designed for users who have difficulty eating due to upper body or upper extremity control. Ergonomic, soft-feel handle balances and stabilizes the bowl on the table while simultaneously providing support to the upper body enabling a more controlled movement of food to the mouth. Lifting rim, opposite the handle, provides extra stabilization when lifting and transporting the bowl. Spouts on both sides of the bowl allow for controlled flow of liquid from t
Ableware All Out Universal Opener
The Ableware All-Out Universal Opener is a multi-functional opening tool designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. Provides the leverage needed to open most packaged food items. The hand rest resembles a computer mouse and distributes the pressure on the hand to reduce pain and cramping, while the T-shaped handle on top allows a person to use the device with little or no gripping strength. Designed to accommodate several gripping opt
Ableware Universal Built Up Handle
The Universal Built Up Handle are utensil extensions designed for individuals with arthritis or limited grasping ability. Multi-purpose handle creates a larger gripping surface on most standard eating utensils – forks, knives, spoons - eliminating the need for special built-up utensils. Soft, ribbed handle fits comfortably in the hand. Can also be used with other everyday items such as pens, pencils, toothbrushes, crochet hooks and knitting needles.
Adjustable Corner Shower Seat
The Adjustable Corner Shower Seat is a shower seat designed for individuals who have difficulty standing for long periods of time, lower extremity instability, weakness or injury. Fits into the corner of a shower stall. Identification markings for adjusting all legs to the correct height. Legs are removable for storage and transport.
Non-skid feet hold seat in place. No tools required for assembly.
Sliding Rotating Transfer Bench
The Sliding Rotating Transfer Bench is designed for individuals with lower extremity, mobility, or balance disabilities. Sliding feature enables user to smoothly move across the bench with little effort and reduces stress on caregiver's back by making it easier to maneuver.
Rotating swivel top allows for easier transfers into the bathing area and greater accessibility. Quick-Change Leg design with identification markings for height adjustment. Legs, back and arm are removable for transport and s
Elevated Bathtub Seat
Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability.
DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm)
CAPACITY: Supports up to 400 lbs. (181.8 kg)
WEIGHT: 4 ½ lbs. (2kg)
Self-Wipe Bathroom Toilet Aid
The Self-Wipe Bathroom Toilet Aid is designed for use by individuals with difficulty bending or limited use of their hands and arms to function independently when using the toilet. Toilet tissue is placed around the angled clamp on the lower portion of the device. After use the user can discard the tissue by pressing the release button on the end of the handle.
Autosqueeze Eyedrop Bottle Squeezer
Autosqueeze Eyedrop Bottle Squeezer is a designed for use by individuals with decreased hand strength and manual dexterity. The enlarged levers help to make bottles easier to squeeze by providing extra leverage.
Autodrop Eyedrop Guide
Autodrop Eyedrop Guide is designed for use by individuals with limited fine motor and grasping difficulties while trying to use an eyedropper. The guide holds the eye open and directs the drops, allowing for accurate eye drop installation. The Autodrop Eyedrop Guide clips into place and positions the bottle at the correct angle over the eye. The special cup design prevents blinking by keeping the lower eyelid open. Unique pinhole directs eyesight upward and away from the descending drops.
Stick-to-Stand System is a product designed for therapists, nurses and caregivers to assist in ensuring that adjustable furniture (i.e. beds, chairs, commodes, etc.) is set at the correct height for individuals, reducing the risk of falls and manual handling injuries. It enables users to correctly measure an individual's lower leg length and then, without having to do any math, determine the correct furniture height for them by simply following the color coded lines on a "stick". Correct furnitu
Corn Pads are protectors designed for use with individuals with toe and digital trauma, painful corns, calluses and blisters. It is designed to alleviate soreness associated with trauma such a hammertoe. These corn pads contain a medical grade mineral oil gel the covers the affected area. It is made out of soft, comfortable and stretchable fabric.
Digital Cap With Toe Spreader
Digital Cap with Toe Spreader is designed to relieve pressure and friction on the toes for multiple purposes. The Digital Cap is fully lined with Silipos® medical grade mineral oil gel for all around digital protection. It can be used to aid in the relief of Functional Hallux Limitus when placed with the spreader on the bottom of the toe. This product is washable and reusable.
Latex free and hypoallergenic.
X-Fer Rail Portable Transfer Rail
The X-Fer Rail Portable Transfer Rail is a transfer board for designed for caregivers to use with individuals with mobility difficulties. Enables safe transfers to and from a wheelchair. Quickly folds and unfolds. Conveniently fits in a backpack, wheelchair bag, carry-on or briefcase (not included). Portability of the board promotes use outside of the home which will help to reduce shoulder strain associated with independent transfers. Open seating design reduces the risk of friction based skin
Nail Care Combination Set
The Nail File and Clipper Combination set features a weighted design for those who can't grasp or use small hand-held implements.
Handhold With Suction Cup Base
The Handhold with Suction Cup Base is designed for use for individuals who may experience decreased trunk stability. As the user is gripping the handhold with one hand, it allows the trunk to become more stable resulting in increased coordination to perform daily activities such as eating, reading, writing, playing activities and using augmentative communication devices. The handhold can be used on any smooth, hard surface.
DIMENSIONS: 8.5 inches x 6.5 inches x 4.75 inches.
Leg Wrap Positioning Aid
The Leg Wrap Position Aid is designed for individuals with motor or sensory impairments such as hemiplegia, paraplegia, hemiparesis and paraparesis who have limited or no use of their leg(s). The Leg Wrap attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles allow for more controlled movement and reduce bruising and injury caused by grabbing and dropping the legs. Handles also el
Semi-Rigid Angled Spoons
Semi-Rigid Angled Spoons are soft plastic spoons designed for use by people who have limited or painful movement of their upper extremities as a result of neurological disorders, traumatic brain injuries, severe arthritis and wrist fractures or shoulder dysfunctions. Food is scooped onto the spoon with simple elbow motion, minimizing the movements of the shoulder and forearm. The raised back prevents food from spilling off the spoon. These spoons are safe for the top shelf of the dishwasher.
The Hydrant is a water bottle designed for use by individuals with limited mobility as a result of back surgery, neurological disorders or spinal cord injuries. Its goal is to allow individuals to independently reach for a drink without calling for assistance. The Hydrant's unique, one piece, cap/handle/clip attaches securely onto beds, chairs, wheelchairs, car seats, belts, rucksacks, bikes, desks, etc. giving the user instant access to fluids allowing them to drink at any time without assistan
Velcro Closure Safety Strap For Wheelchairs (Model H70623)
The Velcro Closure Safety Strap for Wheelchairs, model H70623, is a wheelchair seatbelt made of Velcro closure with metal D-ring buckles. The belt is adjustable, washable, and can be sterilized. The strap can be positioned at various heights to insure user comfort and security. A short strap anchors to the wheelchair frame while the long strap adjusts in length. DIMENSIONS: 32 inches long x 2 inches wide.
Maddagrip Universal Built-Up Grip (Model F74616)
The Maddagrip Universal Built-up Grip, model F74616, is a mouth-inflatable utensil holder designed to provide an enlarged gripping area on eating or writing instruments. The fill tube recesses flush with the surface. When deflated, the unit folds flat for transport or storage. DIMENSIONS: 4.5 x 2.5 x 1.75 inches, inflated.
Inflatable Bath Pillow (Model H72738)
The Inflatable Bath Pillow, model H72738, is a mouth-inflatable contoured pillow designed to provide head support in the tub. Two suction cups hold the pillow to the tub or any smooth surface. The pillow is made of heat-sealed vinyl construction with flush recessing filler tube. DIMENSIONS: 16 x 8 x 5 inches, inflated.
Vinyl Eating Bibs (Model H74694-0001)
The Vinyl Eating Bibs, model H74694-0001, are designed to offer basic protection and easy cleaning. The bibs are made of clear vinyl and have ties at the neck. SIZES: For adults. DIMENSIONS: 18 x 36 inches.
Long Shoe Horns (Models F73823-0000 & F73823-0001)
The Long Shoe Horns are designed for persons who have trouble bending to put on their shoes or to remove their socks. Model F73823-0000 is an epoxy-coated steel shoehorn with curved handle and a notch at the end for removing socks. Model F73823-0001 is the same as above, but made of delux epoxy-coated steel with soft vinyl on the handle for non-slip grip. DIMENSIONS: Both models are 23.5 inches long.
Inflatable Neck Cushion (Model H76479)
The Inflatable Neck Cushion, model H76479, is a cervical pillow designed to give support to the neck and head. The crescent shaped vinyl cushion may be inflated by mouth or by pump to the desired firmness; the filler tube is flush recessing. The pillow comes with a zipper-closed, washable cloth cover. DIMENSIONS: 17 x 8 x 5 inches.
Selfwipe Bathroom Toilet Aid
The SelfWipe Bathroom Toilet Aid is a toileting aid designed for use by individuals with arthritis or upper extremity disabilities. This device allows people with limited use of their hands and arms to function independently when using the toilet. The device has a handle at one end and a clamp at the other, and can be used and operated with one hand. When the user presses a button on top of the handle, the clamp opens. Toilet tissue is wrapped around the clamp, and when the button is released th
Mini Oxygen Tank Holder For Wheelchairs (Model F706201001)
The Mini Oxygen Tank Holder For Wheelchairs, model F706202001, is a wheelchair oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. It attaches to the handles and frame of the wheelchair and positions the tank behind the wheelchair to avoid interference with the user’s head or back. The tank holder is made of heavy duty waterproof nylon and has two pockets that can be used to hold one or two cylinders or other small supplies such as tubing.
Groovy Grip Grab Bar (Models H724580016, H724580018, & H724580024)
The Groovy Grip Grab Bar is a wall grab bar for bathroom, designed for use by individuals with balance or mobility disabilities. This wall-mounted plastic grab bar has grooved surfaces to provide a non-slip grasp, even when wet. Mounting brackets conceal the installation screws. Hardware and detailed installation instructions are included. DIMENSIONS: 1.5 inches in diameter. The distance from wall to bar is 2 inches. Availabe lengths are 16 inches (model H724580016), 18 inches (model H724580018)
The Doorknob Extender is a door handle lever designed for use by individuals with grasping disabilities. This door knob extension handle converts a standard doorknob into a door lever, providing extra leverage so less pressure is needed to turn the doorknob. The extender fits over a standard doorknob and allows access to keyholes. A cord or string can be inserted through the handle slot, making doorknobs easier to access for people with limited reach.
Rehosoft Elevated Toilet Seat (Model H725690050)
The Rehosoft Elevated Toilet Seat, model H725690050, is a cushioned elevated toilet seat designed for use by individuals with lower extremity, mobility, or neurological disabilities or arthritis. The seat is made from a mixture of materials, including PVC plastic, that make it comfortable, non-slippery, and non-sticky. Designed for use on a standard toilet, this unit adds several inches of elevation to the seat. Its shape hugs the toilet, cradling both sides and the front for a tight fit. DIMENS
The Sham-Ease Tray is a shampoo basin designed for use by individuals with mobility disabilities or who use a wheelchair. This portable shampoo tray fits any size sink or basin. It is designed to drain dry after each use. Feature includes suction cups that hold the basin firmly in place and an unbreakable steel frame with a long-lasting baked enamel finish.
Aluminum Bowling Ramp, Two-Piece
The Aluminum Bowling Ramp, Two Piece, is a bowling ramp designed for use by individuals with upper extremity, mobility, or balance disabilities. This ramp can be used while seated or standing. The ramp is placed at the front of a lane and lined up for a direct path to the pins. The bowler slightly pushes the ball to send it rolling down the alley. The unit is made of high-strength aluminum alloy with a clear anodized finish and includes a "U" frame and one-piece ramp track. The U-shaped rear fra
Steel Bowling Ramp, Two Piece
The Aluminum Bowling Ramp, Two Piece, is a bowling ramp designed for use by individuals with upper extremity, mobility, or balance disabilities. This ramp can be used while seated or standing. The ramp is placed at the front of a lane and lined up for a direct path to the pins. The bowler simply gives the ball a slight push to send it rolling down the alley. The unit is made of steel with a clear, baked-on plastic finish and includes a "U" frame and one-piece ramp track. The U-shaped rear frame
Round Bath Stool
The Round Bath Stool is a bathtub stool designed for use by individuals with mobility and balance disabilities. It is designed for use in narrow tubs and showers, this stool features non-slip rubber tips and height-adjustable aluminum legs that are flared to provide a stable base.
Combination Dressing Stick And Shoehorn
The Combination Dressing Stick and Shoehorn is a long-handled and shoehorn and dressing stick designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of hard, durable plastic, this device features a large angled hook that holds and pulls clothing, and a long, notched shoehorn at the opposite end for removing socks. This aid also features a push/pull pointer for opening and closing drawers and doors, turning on and off light switches, and retrievi
Leg Loop Leg Lift
The Leg Loop Leg Lift is a transfer aid designed for use by individuals with lower extremity or mobility disabilities. Constructed of nylon webbing, this device has a foot support that stays open until the Leg Lift strap is pulled. The foot loop support conforms to the shape of the foot for a secure, comfortable grip during transfer onto a wheelchair, footrest, bed, or into an automobile. DIMENSIONS: The leg lifter is 41 inches long and the webbing is one inch wide.
Maddaguard Splash Guard
The MaddaGuard Splash Guard is a toilet seat deflector designed for use by men and boys with physical disabilities. Constructed of durable lightweight plastic, the splash guard is intended to direct urine flow down into the toilet. It can be washed with soap and water or soaked if necessary. The urine shield fits most regular and elevated toilet seats. COLOR: White.
The Plug Puller is a grasping aid for hand designed for use by individuals with fine motor, grasping, upper extremity disabilities, or arthritis. This compact plastic device is designed to assist individuals with pulling plugs from electrical outlets without grasping. Inserting a finger in each circle of the device and pulling on the handle detaches the plug from the outlet. The device stays attached to the plug until it is cut off.
Universal Hand Clip
The Universal Hand Clip is a grasping aid for the hand designed for use by individuals with limited hand strength, arthritis or other graspings or upper extremity disabilities. This spring action hand clip fits securely against the hand and attaches to objects with strips of heavy-duty hook and loop material. It can be used on phones, cups, bottles, hair brushes and other similar items. DIMENSIONS (LxWxD): 8 x 4 x 1 inches.
Playing Card Holder (Model H7125400112)
The Playing Card Holder, model H7125400112, is designed for use by individuals with arthritis or other grasping or upper extremity disabilities. The holder has two clear plastic tiers and a hardwood base with non-skid rubber pads. The plastic tiers hold up to 18 cards. DIMENSIONS (HxLxW): .75 x 2.5 x 6 inches. Warranty: 12 months parts and labor.
Double-Sided Quilted Walker Bag (Model F703220050)
The Double-Sided Quilted Walker Bag, model F703220050, is a carrying bag for walker designed for use by individuals with mobility, walking or balance disabilities. Made from a durable poly/cotton blend, this bag drapes over the center bar of a walker, and it has front and back pockets to hold personal items. The bag is secured with hook-and-loop closures. DIMENSIONS (LxWxD): 15.5 x 6.5 x 1.5 inches. The pockets are 13 x 10 inches. COLORS: Available in blue and burgundy prints or gray and burgund
The Under-Toe Washer is a long handled sponge designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury or arthritis or anyone having trouble bending or reaching either foot. The device consists of a stick with a soft built-up handle on one end and a sponge on the other end. The sponge fits between the toes, and it can be removed and replaced. Replacement sponges are sold separately. DIMENSIONS: The entire washer is 25 inches long. The sponge (LxWxD) is 1.
Corner Shower Seat (Model F727120000)
The Corner Shower Seat, model F727120000, is a corner shower seat designed for use by individuals with balance or mobility disabilities. This shower chair fits into the corner of a stall requiring minimal space. It has a built-in front compartment that can be used to hold soap and a wash cloth. The chair is durable, rust proof, and easy to clean. DIMENSIONS (HxDxW): 16.5 x17 x 23 inches. The seat’s back height is 5.75 inches and the base is 24 inches. CAPACITY: 300 pounds. WEIGHT: 15 pounds. COL
Automatic Card Shuffler
The Automatic Card Shuffler is a card shuffler designed for use by individuals with limited hand strength or fine motor or grasping disabilities. With the press of a button, this device will perform a full random shuffle of one or two decks of cards. This shuffler has two card slots (one on each side) into which the user places the cards to be shuffled and a catch tray in the center where the shuffled cards are placed.
Tenura Anti Slip Circular Mat
The Tenura Anti Slip Circular Mat is a non slip coaster and non slip pad designed for use by individuals with fine motor, upper extremity or neurological disabilities or spasticity. This round silicone mat is intended to prevent plates, bowls and crockery from sliding on tables, counters and trays. It also can hold kitchen appliances and mixing bowls in place and hold objects firm on surfaces that are not horizontal or are subject to movement or tipping. DIMENSIONS: 5.5 or 7.5 inches in diameter
Tenura Anti Slip Coaster
The Tenura Anti Slip Coaster is a non slip coaster and non slip pad designed for use by individuals with fine motor, upper extremity or neurological disabilities or spasticity. This square silicone mat is intended to prevent plates, bowls and crockery from sliding on tables, counters and trays. It also can hold objects firm on surfaces that are not horizontal or are subject to movement or tipping. DIMENSIONS (LxW): 3.5 x 3.5 inches. COLOR: Red, blue, and yellow.
Tenura Silicone Jar Opener
The Tenura Silicone Jar Opener is a non-slip jar opener designed for use by individuals with grasping or fine motor disabilities, arthritis and those with the use of one hand. Made of silicone, this device provides a firmer grip for the user when twisting, turning or squeezing jar lids and containers. It can also be used on handles and door knobs. This product is non-toxic, dishwasher safe and heat resistant up to 482 degrees Fahrenheit. DIMENSIONS: 4.63 inches in diameter. COLORS: Red, blue and
Tenura Anti-Slip Rectangular Table Mat
The Tenura Anti-Slip Rectangular Table Mat is a non-slip placemat designed for use by individuals with upper extremity or neurological disabilities or spasticity. Intended to hold plates, cups, and utensils securely in place on tables, counters and trays, this silicone mat provides a firm, secure grip for these types of surfaces. The mat can also be used to hold cutting boards and kitchen appliances in place on non-horizontal surfaces or surfaces subject to motion or tipping. DIMENSIONS (WxD): 1
Tenura Anti-Slip Rectangular Floor Mat
The Tenura Anti-Slip Rectangular Floor Mat is a non-slip floor covering designed to prevent falls by individuals with balance, mobility, or walking disabilities. When placed on smooth or slippery floors, these silicone mats are intended to stabilize the user’s feet while sitting or standing, transferring to or from a wheelchair, or getting in or out of bed. The mats are durable and fully washable. DIMENSIONS (WxD): 23.5 x 17.75 inches. COLORS: Red, blue, and yellow.
Tenura Non-Slip Material Rolls And Strips
The Non-Slip Material Rolls and Strips are a grasping aid, non-slip floor covering, and non-slip placemat material designed for use by individuals with neuromuscular, grasping or fine motor disabilities or spasticity. This non-slip material is designed to provide customized solutions for improving a person's ability to grasp an object, reducing the risk of slipping on a floor, and preventing plates, bowls and crockery from sliding on tables, counters and trays. The material for the strips is a f
Tenura Extreme Grip Mats
The Tenura Extreme Grip Mat is a non-slip pad, matting, placemat, or floor covering designed for use by individuals with upper extremity and grasping disabilities. This mat is made with a translucent material that is sticky to the touch and grips objects immediately on contact providing a firm hold. It can be used as walker tray lining, and to hold loose objects firmly in place in vehicles, mobile homes and boats. The mat offer different levels of hold and is tacky to the touch. It is dishwasher
Tenura Anti Slip Bathroom Aid
The Tenura Anti Slip Bathroom Aids are bathtub safety treads and non-slip floor covering designed to provide traction in the bathtub or shower or on wet bathroom floors for people with balance or mobility disabilities. Designed to help reduce the risk of slipping and falling on wet surfaces, these non-slip discs or strips is made of self-adhesive material intended to provide a non-slip grip in bathrooms and changing rooms where floors and surfaces tend to be wet and slippery. This product is sol
Maddak Deluxe Hip Kit, Model F738000001
Maddak Deluxe Hip Kit is designed for people with limited mobility, arthritis or recovering from hip, knee, or back surgery. It includes assistive devices for independent dressing and bathing.
Maddak Swiveling Lotion Applicator, Model F741350000
Maddak Swiveling Lotion Applicator moves with the contours of the body and allows to apply lotions, oils, and creams to hard to reach spots without straining. Its soft, high-end, cosmetic grade applicator, and long handle reduces the need to bend, stretch, or strain. It is designed for people with mobility and upper-lower disabilities.
Maddak Scooper Plate With Suction Cup Base, Model 920479
Maddak Scooper Plate With Suction Cup Base, it's designed for people with fine motors disabilities. It has high rim and reverse curve on one side of 6.75 inches diameter. It helps those with self-feeding problems to scoop food without spilling. It has a rubber suction base that adheres to tabletop to keep plate securely in place.
Maddak One Hand Adaptive Utensils Cutlery Set (Model H746100000)
The Maddak One Hand Adaptive Utensils Cutlery Set, model H746100000, is a combined fork and knife set designed for individuals with upper extremity disabilities or the use of only one hand. When the device is placed over a piece of food and pushed down, the fork retracts inside the three-sided box knife. The knife then cuts a bite-sized piece of food. When pressure is released, the spring-mounted fork holding the food extends past the knife, allowing the user to eat the freshly cut piece. The fo
Maddak Pediatrics No-Tip Weighted Base Cup, Model F745940000
Maddak Pediatrics No-Tip Weighted Base Cup is a two-handled cup with weighted base and rounded corners which are ideal for pediatric use. It is self-righting even when released from a lying position. It comes with a clear plastic, dish-shaped lid with two holes to let fluid flow into the dish for drinking.
Maddak Drinking People Feeder
Maddak Drinking People Feeder is suitable for feeding thick soups or pureed food to people in bed or to people who have limited oral-motor abilities. The caregiver can dispense food at any rate. A soft, silicone rubber feeding nozzle can be squeezed to control the flow of food into the patients mouth. The food reservoir has a plunger that forces the food through a side port into the feeding nozzle. The Feeder is an alternative to syringe feeding.
Maddak Eating Scooper Bowl With Suction Cup Base, Model F745340000
Maddak Eating Scooper Bowl With Suction Cup Base is designed for people with tremors, grasping and fine motor disabilities. It features high rim and reverse curve on one side that aids in scooping food onto a utensil without spilling. The bottom of the dish has a rubber suction base to prevent skidding. It is made of molded heat-resistant plastic.
Ableware 700010000 Morph Wheels-Folding Wheels for Wheelchairs
Morph Wheels-Folding for Wheelchairs are designed to be foldable wheelchairs. Is intended facilitate transportation when traveling. It comes complete with rim, push rim and solid tire, and are designed to fit any chair with a standard quick release axle. Attaching Morph™ Wheels or removing them from the wheelchair is exactly the same process as with any other wheels that use quick release axles. The axle acts as a fail-safe mechanism ensuring that as long as it is through the hub of the wheel t
Ableware 703170000 Mobility Plastic No-Wire Walker Basket by Maddak
This no-wire walker basket is meant for walker users. The basket firmly attaches to the horizontal and vertical bars of the users walker. Its flexible, virtually indestructible, retractable stabilizing arms lock onto the legs of the walker and eliminate excess swinging. The front of the basket features a slot for an identification tag and the bottom of the basket has a built-in glass, can or cup holder, a smaller compartment for coins or medications and a trough for utensils, pens, straws or eye
Ableware 703190050 Deluxe Wire Walker Basket with Stabilizing Bars
The Ableware Deluxe Wire Walker Basket with Stabilizing Bars is plastic coated. Two hooks support the basket while two easy to bend, vinyl coated aluminum stabilizing strips keep it from swinging. The strips permit attachment to nearly all walker models. It features a heavy duty white plastic insert tray that has one large compartment, a coin or medication holder and a round compartment for a glass, can or cup.
Ableware 703192000 Economy Walker Basket with Hook-and-Loop
Plastic-coated wire basket can be attached to most walkers and features a heavy duty clear plastic tray that has one large compartment, a coin or medication holder and a round compartment for a glass, can or cup.
Ableware 703200050 Walker Bag Hook by Maddak
Creates a convenient spot on a walker to hang a bag or purse. Simply attach the clamp around the walker and hang a purse or bag on the hook. Can also be used on most standard bed rails. Clamp can be adjusted to accommodate tubing diameters of 1/2 to 1 1/8" (1.27 - 2.9 cm).
Ableware 703210000 Madda-Comfort Walker and Crutch Hand Pads
Madda-Comfort Walker and Crutch Hand Pads is designed to minimize hand discomfort and sweaty palms when using a walker or crutches. Two layers of terrycloth are combined to achieve a soft, clean, comfortable grip. The pads wrap around standard walker or crutch handles and are secured by hook-and-loop fasteners.
Ableware 703220051 Double-Sided Quilted Walker Tote Bag-Printed Burgundy
Double-Sided Quilted Walker Tote Bags hangs over walker crossbar Quilted decorative cotton tote bags have front and back pockets that are held in place by hook-and-loop closures. Is designed for people with fine motors disabilities.
Ableware 703230000 Star Glide 1"
Nylon glides for wheeled walkers reduce friction and self-align with the floor to allow for easier movement of the walker. it is designed to be simple to use and easy to install by removing the rubber tips from the walker legs and replace them with Star Glides.
Ableware 703230001 Star Glide Walker Slides-1 1/8"
Star Glide Walker Slides are for wheeled walkers to reduce friction and self-align with the floor to allow for easier movement of the walker. To install, remove the rubber tips from the walker legs and replace them with Star Glides.
Ableware 703230010 Walker Glides
Walker Glides are intended for people who use walkers. For use on wheeled walkers Makes it easier to manipulate the walker For use on the rear legs of wheeled walkers. Enable smoother movement over a variety of surfaces. One size adjusts to fit most walkers. Sold in pairs.
Ableware 703230011 Walker Balls
Ablewar Walker Balls are designed for people that use a walker. It is an alternative to rubbed glides. Allow for effortless, scuff-free movement across floors. Felt covered rubber balls are ready to use and simple to install. Fit most walkers. Sold in pairs.
Ableware 703240000 Cane/Crutch Holder
The Cane/ Crutch Holder is designed for those who use a cane. This holder clips onto the cane so it can hang from the edge of any table, desk, or counter. The user can also stand the cane on the floor next to a table and slide the clip up until it wedges against the underside of the table. A foam rubber pad on each side of the clip keeps it in place.
Ableware 703240050 Cane/Crutch Holder-2/Bag
The Cane Cruth Holder- 2 is designed for people who use a cane. Is a small plastic fitting that mounts on a cane to hold it on a table edge when not in use. Snaps onto the cane and slides up or down to contact the top or bottom of the table. Can be used in pairs to contact both the bottom and top of a table. A small rubber band is placed around the end hooks to maintain a better grip on the cane shaft.
Ableware 703250002 Metal Cane Holder for Walkers/Wheelchairs by Maddak
The Metal Cane Holder for Walkers/Wheelchairs is designed to assist cane users carry it everywhere. This double-clip cane holder allows users to keep a cane handy wherever they may need it. The users snaps one side of the clip onto any tubular structure such as a table leg, walker, commode, wheelchair or lawn chair. The opposite side of the clip holds almost any size cane. The gripping surfaces are soft plastic rollers and will not damage canes.
Ableware 703260000 Cane Hand Loop
The Cane Hand Loop is designed for people with disabilities that use a cane. One end wraps around the cane/walking stick shaft while the larger loop on the opposite end slips around the wrist. Even if the cane falls out of the hand, it won t drop to the ground. Made of polypropylene webbing.
Ableware 703270000 Hand Band Grip Enhancer-Small-2/pack
Gives people with limited grip and hand strength additional control of walkers and canes. Band attaches to the handgrips of the walker or the cane shaft using hook-and-loop fastener. The user places the fingers in the band creating an enhanced grip. The elasticity in the band provides greater control and ensures a secure grip. Also useful for products that require a firm grip and swinging motion such as gardening tools, brooms and mops.
Ableware 703270001 Hand Band Grip Enhancer
The Hand Band Grip Enhancer is designed for people with limited grip that need additional hand strength and control of walkers and canes. The band attaches to the handgrips of the walker or the cane shaft using hook-and-loop fastener. The user places the fingers in the band creating an enhanced grip. The elasticity in the band provides greater control and ensures a secure grip. Also useful for products that require a firm grip and swinging motion such as gardening tools, brooms, and mops.
Ableware 703290001 Crutch Bag-Vinyl-Black
Crutch Bag-Vinyl-Black bag is designed to make it easier for users to carry personal items while using crutches. The deep pocket provides room to hold a cell phone, keys, wallet, etc. It attaches to the side of the crutch and does not interfere with any movement. Machine wash, air dry.
Ableware 703340010 Quilted Folding Cane Bag w/ Strap
The Quilted Folding Cane Bag w/ Strap is intended for people who have a cane. It is a bag with sufficient space to carry a folded cane. The quilted inside is designed to protect the cane.
Ableware 704000001 Arm Escort by Maddak-Right Arm-Medium
The right arm escort in a medium size is designed for people with hemiplegia to use instead of a regular arm sling. It protects and supports the hemiplegic arm during all aspects of functional mobility. The two-piece design consists of a wrist support and a heavy duty cotton belt. The wrist support attaches to belt with hook-and-loop and detaches when not needed, making it easy to put on and take off.
Ableware 704000004 Arm Escort by Maddak-Left Arm-Medium
The left arm escort in a medium size is designed for people with hemiplegia to use instead of a regular arm sling. It protects and supports the hemiplegic arm during all aspects of functional mobility. The two-piece design consists of a wrist support and a heavy duty cotton belt. The wrist support attaches to belt with hook-and-loop and detaches when not needed, making it easy to put on and take off.
Ableware Arm Escort by Maddak-Left Arm-Large
The left arm escort in a large size is designed for people with Hemiplegia to use instead of a regular arm sling. It protects and supports the Hemiplegic arm during all aspects of functional mobility. The two-piece design consists of a wrist support and a heavy duty cotton belt. The wrist support attaches to belt with hook-and-loop and detaches when not needed, making it easy to put on and take off.
Ableware 704010000 The Patient Handler
The Patient Handler is a handled sling that saves the attendants back and provides more comfort and safety for the patient. It can be used by one or two professionally trained people for reseating a patient, transferring between bed, commode, wheelchair etc. or standing a patient up from a seated position. The sling is made of high strength but flexible plastic that conforms to the patient's body.
Ableware 704021048 Gait Belt-Striped-48"
Gait Belt-Striped 48 inches is designed for to help health care providers and caregivers to move patients from one surface to another.
Ableware 704021054 Gait Belt-Striped-54"
Gait Belt-Striped-54 inches is designed to assist health care professionals and caregivers with transferring patients from one surface to another.
Ableware 704022000 Slip-On Gait Belt Handle With 2 Grips
The Ableware Slip-On Gait Belt Handle slides onto any gait belt 2 inches (5.08 cm) wide or less and provides caregivers with two strong, easy to grab vertical handles. Making use of both horizontal and vertical holding positions results in safer and easier transfers. Made of high strength webbing; it won't rip or tear. Belt not included.
Ableware 704030000 Patient Slide by Maddak
The Patient Slide makes the process of sliding a person to the back of a seat easier and safer for both the patient and the caregiver. The Patient Slide reduces the risk of bruising and injury caused by grabbing the individual or their clothing. Can be used on chairs, wheelchairs, and transport chairs. Smooth surface on one side reduces friction while the non-slip material on the other end allows the patient to be safely repositioned to the back of the seat. Soft, built-up handles are easy to ho
Ableware 704040000 X-Fer Rail Portable Transfer Rail
X-Fer Rail Portable Transfer Rail is designed for people who use a transfer board but do not travel with them due to their bulkiness and weight. The portable transfer board offers all of the functionality of a traditional transfer board but folds to a compact 16.25 inches (41.3 cm) when not in use. It folds and unfolds enabling safe transfers to and from a wheelchair, and fits in a backpack, wheelchair bag, carry-on or briefcase. Its portability promotes use outside of the home helping to redu
Ableware 704071500 15" Standing/Sitting Turntable by Maddak
Ableware's Standing-Sitting Turntable is a rotating pivot disk designed for people with limited mobility and other related disabilities. The flexible design allows the user to sit on the device and turn on a bed or chair. It is useful for getting in and out of a car seat. A rubber disk on the bottom provides a non-skid surface while the top plastic disk slides against a fabric center. The turning disk provides a smooth, controlled motion, to make the user feel secure.
Ableware 704092000 Maddacrawler Prone Support Walker
The Maddacrawler Prone Support Walker teaches elementary crawling skills to children with developmental delays. The design properly aligns the childs body while encouraging crawling motion and weight bearing on hands and knees. Sling provides strength, support, and comfort and is height adjustable from 9 17" (22.9 45.2 cm) to accommodate different sized children. The body of the crawler is lightweight durable plastic and weighs approximately 20 lb. (9 kg). Casters are factory installed and suita
Ableware 704092005 Sit and Ride Ambulatory Aid
Assists developmentally delayed children and adults who are experiencing ambulatory difficulties. Can be used as a stepping stone in therapy. Practice in the seated position of certain ambulatory patterns will prepare a person for actual use of the movements in a standing position. The sling allows children and adults of all sizes to sit and propel themselves with their feet and to practice smooth reciprocal leg movements, heel strikes, and coordinated knee flexion and extension. Can also be use
Ableware 704092010 Replacement Sling for Sit and Ride and Maddacrawler
The Replacement Sling for Sit and Ride and Maddacrawler is designed to assist adults and children that have fine motors disabilities. It can be used as a stepping stone in therapy. Practice in the seated position of certain ambulatory patterns will prepare a person for actual use of the movements in a standing position. Sling is height adjustable from 9 – 17¨ (22.9 – 45.2 cm) and allows children and adults of all sizes to sit and propel themselves with their feet and to practice smooth reciproc
Ableware 704170000 35" Mobility Leg Lift by Maddak
Ableware's Leg Lift is designed for people with limited lower extremity strength. It enables them to lift the foot onto a wheelchair foot rest, bed or into a car. The user can independently move their feet with the help of the leg strip.
Ableware 704171000 Mobility Leg Loop Leg Lift
Ableware's Leg Loop Leg Lift is designed to assist people with limited lower extremity strength to lift the leg and foot onto a wheelchair footrest, bed, into a car, etc. The foot loop stays open until the strap is pulled and then conforms to the shape of the foot for a secure and comfortable grip. A rigid middle section allows for easy maneuverability.
Ableware 704180000 Leg Wrap Positioning Aid-Single
The Ableware Leg Wrap Positioning Aids attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles eliminate the need to grab clothing and create a controlled movement thereby reducing injury caused by dropping the legs.
Ableware 704180002 Leg Wrap Positioning Aid
The Ableware Leg Wrap Positioning Aids attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Convenient upper and lower handles eliminate the need to grab clothing and create a controlled movement thereby reducing injury caused by dropping the legs.
Ableware 704200000 Leg Assist Mobility Device
Designed to make it easier for caregivers to reposition and transfer people recovering from total hip or knee surgery when it is necessary for the legs to be kept stable and moved in unison. Legs and hips are also positioned in-line to eliminate the risk of further injury. Made of soft, comfortable fabric with a built-up grip that can be adjusted to accommodate the user's preference. Machine washable.
Ableware 704350000 Handhold
The Handhold is designed to help people have more stability. Gripping the handhold with one hand allows the trunk to become more stable resulting in increased coordination to perform daily activities such as eating, reading, writing, playing activities, and using augmentative communication devices.
Ableware 704401000 Corner Seat/Positioning Aid
This product is designed to promote head and upper extremity control in order to encourage the development of fine motor control. The corner seat stabilizes the shoulders, pelvis and trunk and facilitates the arms and shoulders to come forward which increases arm movements and allows the child to work on activities in the midline. Features an H-strap for anterior trunk support, a hip belt to maintain proper position and an abductor block to help maintain leg extension and reduce extensor thrust.
Ableware 704430000 Maddacare Children's Seat
The Maddacare Children's Seat is intended for children with learning and cognitive disabilities as well as fine motors disabilities. It is portable it can be transformed into a booster seat.
Ableware 706010000 Laptop Wheelchair Desk
Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.
Ableware 706160000 Wheelchair Carry-All
The Wheelchair Carry-All is designed as backpack for the wheelchair. The wheelchair user or the caregiver can attached to the back of the wheelchair. A full-width pocket inside helps keep things in order.
Ableware 706201000 Nylon Oxygen Tank Holder for Wheelchairs by Maddak
Ableware's Oxygen Tank Holder for Wheelchairs fits size "D" and "E" oxygen tanks with minimum lifting and positioning. The holder positions a 26 inches (66 cm) long tank off-center behind the wheelchair back to avoid interference with the wheelchair user's head or back. The holder is made of heavy duty, waterproof black nylon.
Ableware 706201001 Mini Oxygen Tank Holder for Wheelchairs
Ableware's Mini Oxygen Tank Holder for wheelchairs holds M6 oxygen cylinders. The holder attaches to the handles and frame of the wheelchair and positions the tank so as to not interfere with the user's head or back. It features two pockets that can be used to hold either two cylinders or once cylinder and miscellaneous supplies, like tubing. It is made of heavy duty, waterproof nylon.
Ableware 706220001 Wheelchair Plastic Cup Holder by Maddak
Ableware's Wheelchair Cup Holder holds a drink securely on wheelchair frames, bed rails, and other tubular frames. The plastic cup holder is slotted on two sides to hold a cup with handles and is accessible to left or right-handed people. It can also hold a glass, can or bottle. The rugged plastic clamp has a large easy-to-tighten lever knob. It is designed for people with fine motors and grasping disabilities.
Ableware 708500002 Porcupine Ball
The Porcupine Ball is for finger exercise, grip improvement and various games of skill. It stimulates sensory perception and improves flexibility and strength in the fingers. Hundreds of soft, rounded porcupine quills cover its surface. When used in combination with other types of balls, it can be useful for tactile discrimination activities including form, size, and weight.
Ableware 708590000 Textured Ring
The Texture Ring is designed for people with grasping and fine motors disabilities. The Texture Ring is a flexible and resilient plastic hand exerciser with eight rows of soft porcupine quills that provide tactile stimulation.
Ableware 709020000 Hand Gym Exercise Unit
The Hand Gym Exercise Unit Designed for people with arthritis, partial paralysis, Multiple Sclerosis, CVA, spinal cord injuries or people recovering from hand surgery. Helps improve strength, dexterity, and range of motion using isometric and resistive movements while the hand is positioned for optimal functioning. Finger joints can be exercised individually or together.
Ableware 712050000 Bowling Ball Pusher
The Bowling Ball Pusher is designed for wheelchair users. Is intended for people who want to play bowling but are in a wheelchair. Four-pronged steel and aluminum guide rests gently on the alley floor while pushing the ball. Plastic caps protect the floor surface and bowling ball. Extension handle lengthens for use, shortens for transport or storage.
Hot Hand Protector and Jar Opener
The Hot Hand Protector and Jar Opener helps maintain a secure grip on hot, cold, or slippery items such as bottles, glasses, and pans. It is designed for people with upper extremity disabilities. Also works as a gripper to unscrew tight jars and bottle caps. Recommended as a precaution against burns for people with hands that have reduced sensation to heat. The gripping surfaces are studded with small suction cups. End pockets fit the thumb and fingers.
One Hand Canister Set
The One Hand Canister set is designed for people with mobility or grasping disabilities as well as for people that had a stroke or lack strengths on the upper side of their bodies. Ideal for children, seniors or anyone with the use of only one hand or limited hand strength/gripping ability. It requires no twisting, turning, or hand strength. Canisters open and close with a gentle press of a finger or the palm of a hand. Use for food storage, storage of household items, office supplies, garage i
Ableware 753670000 Blister Pack Pen
The Blister Pack Pen is designed for people with grasping and upper extremity disabilities to facilitate the retrieval of pills from the blisters packages. Pointed tip easily cuts through blister packs and protective seals on pill bottles, and looks like an ordinary ballpoint pen. Fits in purses, briefcases, cosmetic bags, etc.
The Key Turner by Maddak improves both grip and turning leverage when using a key. A single key is secured to the turner with a binding post. The handle has two large finger holes for extra control.
Ableware 754120000 Key Holder For Two Keys
The Key Holder for Two Keys is designed for people with mobility and upper extremity disabilities.The key holder ends the struggle of turning keys in locks by providing a rigid handle for extra leverage. Keys fold back into the plastic holder when not in use. Neon yellow color helps locate keys.
Card Player Card Holder
The Card Player Card Holder is fan shaped playing card holder is designed for people with limited finger strength and dexterity. The Card Player Card Holder holds cards snugly and provides a clear view of cards. It can be held comfortably by a weakened or arthritic hand and can stand by itself on two non-skid legs. The cards will not fall out if the holder is tilted. The holder is also works for phone messages, recipes, shopping lists, coupons, receipts, reminders, etc.
The Clamp-On-Adjustable Mirror is designed for people with upper extremity disabilities, aphasia, and or motor disabilities. The mirror adjust to surface and it can be manipulate to the users convenience. The large 8 x 12" (20 x 30 cm) shatterproof mirror is mounted on a 12" (30 cm) long, flexible metal gooseneck attached to a strong plastic spring clamp. The clamp grips flat surfaces up to 1" (2.5 cm) thick. Users with aphasia can also use it as a speech therapy tool, and can also be used as re
Bed Tags Starter Kit
Bed Tags Starter Kit are designed to be used to visually determine if a patient is at risk of falling. Blue tags indicate the height for a safe transfer. When the bed is at the appropriate height, the tag just touches the floor. The tag will rest on the floor if the bed is too low and will dangle above the floor if it is set too high. Orange tags, when just touching the floor, indicate the bed is at the lowest setting, which is the safety position for patients who cannot stand safely on their ow
Door Knob Gripper
The Door Knob Gripper is useful for people who have difficulty turning doorknobs. The inner ribs grip the doorknob firmly while the smooth outer surface allows a gentle stroke of the hand to turn the knob. Can also be used on outdoor water faucets. Easily installed by slipping the device over the doorknob.
Plastic Bed Tray
The Plastic Bed Tray can be used for eating, reading, writing, grooming, and playing games in bed. Side pockets in the bed tray provide space for books, magazines, cards, and make-up. The side handles on the bed tray make carrying and handling easy.
Ableware 764290000 Shoulder Mounted Shampoo Rinse Tray
The Shoulder Mounted Shampoo Rinse Tray is designed to use for washing users' hair. It mounts on the shoulders and is held by two foam-padded flaps that hang in front of the shoulders. A curved neck rest provides a comfortable support. Water drains into the sink without making a mess.
Ableware 764302000 Easy Shampoo Basin by Maddak
The Easy Shampoo Basin is a tool for caregivers to assist with washing patients' hair. The simple, easy-to-use, inflatable tray comfortably supports and cushions the head, neck, and shoulders during the shampooing process. The unique double-tube design prevents splashing and spilling. Users will also appreciate the drain hose that conveniently removes soap suds and water for easy clean-up.
Shampoo-Aide Shampoo Tray-Wire Extender
The Shampoo-Aide Shampoo Tray-Wire Extender makes shampooing more comfortable and less messy. Provides comfort for any seated individual because of its complete adjustability to fit various body types. It rests comfortably on the shoulders, eliminating the discomfort of leaning over a sink or lying back in a shampoo bowl. The trays raised edges channel water into the sink keeping the floor dry. Fits most kitchen, bathroom, and laundry room sinks or shampoo bowls. The hinged center allows for hei
Deluxe Shampoo Cape
The Deluxe Shampoo Cape is designed for people with mobility disabilities. The Comfort-Design neck protects skin and clothing while hair is being washed, cut, dyed, or styled. The cape is made of a stretch fabric that is water, chemical, stain, and wrinkle resistant. Hook-and-loop closure at the neckline ensures that the neck stays dry and clean. The reversible cape can be worn on either side and can be worn with the opening in the front of back depending on the shampoo method.
Ableware 764880010 Ablerise Bed Rail Double
Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets. Non-metal handles are warm to the touch and can be used for repositioning or turning in bed. Bars slide between mattress and box spring.
Ableware 766300000 Soft Touch Tuffet Foot/Leg Rest by Maddak
The Soft Touch Tuffet Foot/Leg Rest ergonomically places the legs in a slightly-bent position, elevating the feet which can result in improved venous return and increase the oxygen supply to the lower limbs. This process can reduce swelling and also help to improve skin and muscle condition. The durable plastic can even be adjusted for firmness by releasing air from a recessed air valve.
Closed-Cell Foam Tubing-Bright Color Assortment
Closed-Cell Foam Tubing-Bright Color Assortment are built-up handles designed to give the user greater control. They are intended for people who lack coordination, strength, gripping ability, or arthritis or grasping disabilities. The user can insert utensils, pens, or pencils inside the tube to help with the grasping process.
Pediatric Reacher is a lightweight reacher designed for children and adults with small or weak hands. Length and trigger design are the result of human factors studies to create a reacher for small hands and limbs.
Ableware 769600110 Omnigrip Reacher - 30"
Omnigrip Reacher - 30" it's designed for people with grasping instabilities. It requires at least some hand strength to operate. A unique locking mechanism allows a continuous hold on an item without applying pressure on the trigger. The jaw is easily adjusted to any of four up/down positions and any of four axial positions to achieve the best angle for use whether sitting, standing, or lying down. A magnet on the jaw picks up needles and nails. Removable wrist support adds balance and control f
Slipos Corn Pads
Slipos Corn Pads are soft, comfortable, stretchable fabric tubes are designed to alleviate soreness associated with hammertoes and digital traumas. They are designed to relieve pain and discomfort from corns, calluses, and blisters. The pads are half coated with gel to cover only the affected area. Medical grade mineral oil is continuously released onto the hard skin to soften, moisturize, and comfortably remove corns. Dermatological tested, diabetic friendly, latex-free, washable, and reusable.
Slipos Gel Toe Tubes
The Slipos Gel Toe Tubes are soft, stretchable fabric tubes that are fully lined with moisturizing, polymer gel infused with medical grade mineral oil. The tubes offer comfort and cushion to sensitive corns and calluses by absorbing shock and pressure. Tubes can be trimmed to meet individual sizing needs.
Ableware 789070000 Slipos Moisturizing Gel Heel Sleeve
Slipos Moisturizing Gel Heel Sleeve is a thin gel pad anatomically molded to fit the heel. They are beneficial for dermatitis, eczema, and reduction of heel fissures. They are constructed of tri-block polymer gel infused with medical grade mineral oil that continuously moisturizes and softens the skin. They lightweight heel sleeve can be used overnight to provide relief from dry, hard, cracked skin. Can be used in conjunction with other skin moisturizing creams and lotions.
Slipos Slim Gel-Fit Bunion Sleeve
Slipos Slim Gel-Fit Bunion Sleeve is an elastic bunion sleeve with gel pad which shields the painful and sensitive bony protrusion of the forefoot. Tri-block polymer gel pad is infused with medical grade mineral oil that moisturizes and softens the skin while helping to relieve shoe pressure, friction, and shear forces on the bunion. The sleeves are thin and compact, and are for everyday use. They can be used with most dress, casual, or athletic shoes with or without hosiery. Dermatological test
Ableware 789110000 Slipos Elbow Sleeve
Slipos Elbow Sleeve is a stretchable, lightweight sleeve with gel pad that comfortably contours around the elbow to protect the area from pressure, friction, and shear forces. The elbow sleeve continuously moisturizes, softens, soothes, and rejuvenates dry, flaky skin, and effectively helps prevent elbow ulcerations. It protects the elbow from pressure, friction, and shear forces, protecting to the ulnar nerve and bursa of the elbow. The gel pad is constructed of a tri-block polymer gel infused
Ableware 789120000 Terry Gloves
Terry Gloves are moisturizing gloves that are fully lined with gel and release soothing mineral oils to moisturize and soften dry, cracked hands, and nails. Tri-block polymer gel is infused with medical grade mineral oil to continuously moisturize while providing relief and comfort. The gloves continuously soothe and soften hands, providing warmth and comfort to arthritic hands.
Eye Care Eye Wash Squeeze Bottle
The Eye Care Eye Wash Squeeze Bottle is an easy-to-squeeze bottle with an eyecup that allows the eye to be irrigated whether the user is standing, sitting, or lying down. A perforated plate breaks up the stream of water, providing a gentle spray into the eye. Allows for fast, effective relief for immediate emergency flushing. Used eyewash exits through drain tube and is prevented from going back into bottle.
No-Sweat Ice Bucket
No-Sweat Ice Bucket is constructed of expanded polymer foam that keeps ice from melting longer than traditional ice pails. The four liter capacity helps keeping small readymade ice packs close at hand. Lightweight and easy to transport, the ice bucket is virtually indestructible, impervious to moisture and odor and will not sweat. Designed for people with grasping disabilities.
Graduated Pitcher is designed for people with upper extremity disabilities or mobility disabilities. The graduated pitcher is easy for the user to pour the water or solids without spilling them.
Ableware Self Wipe Bathroom Toilet Aid (Model 725062000)
The Ableware Self Wipe Bathroom Toilet Aid, model 725062000, is a hygienic aid designed to help individuals who have difficulty functioning independently when using the toilet due to limited use of their hands and arms and/or difficulty bending. Once toilet paper has been placed around the angled clamp at the lower portion of this device, it is ready to be used. Then a press of the release button at the end of the handle will discard the toilet paper. Constructed of sturdy plastic, the Ableware
Contoured Tall-Ette Elevated Toilet Seat
The Contoured Tall-Ette Elevated Toilet Seat is an elongated toilet seat that comes with a Lock-In-El Slip-In Bracket for a simple, permanent attachment to the existing toilet seat. The full inner ring contact with the bowl is not required.
Tall-Ette Arthro Left Elongated
Tall-Ette Arthro Left Elongated is designed with a gentle slope on one side for people with hip, leg, or knee injuries who require an extended leg position. It's intended to add a height for the user comfort.
Suction Cups for Shower Seat & Transfer Bench
The Suction Cups for Shower Seat & Transfer Bench is designed for people with lower extremity disabilities. The shower seat has removable back and arms to assist in sitting or standing and to make personal hygiene easier for the user. Transfer bench provides easier access for people who have difficulty getting in and out of the shower. Features height adjustable legs (16-21"), suction feet, and a built-in hand held shower spray holder.
Page Turner/Keyboard Aid-Hand/Wrist Cuff
Arthro Thumbs-Up Cup with Lid
Arthro Thumbs-Up Cup with Lid is designed for those with decreased grip strength, wrist pain, hand deformities, or who have trouble keeping wrists in a neutral position. The design keeps the cup steady and the double-walled, graduated design allows users to drink without spilling.
Arthro Thumbs-Up Replacement Lid
The Arthro Thumbs-Up Replacement Lid is functional and lightweight for people who have decreased grip strength, wrist pain, hand deformities, or need to keep the wrist in a neutral position. The ergonomic design increases leverage of the hand and aids in raising the cup to the lips without wrist motion. The thumbs-on grip reduces the possibility of spilling due to trembling. The cup is double-walled to protect hands from heat or cold.
Ableware 745740000 Ergo Mug-Blue
The Ergo Mug is an easy to hold cup has an extra wide handle and grooved gripping surface. A small finger rest opposite the handle allows it to be lifted with both hands reducing the risk of spills. Graduation markings and translucent plastic make it easy to see how much fluid is consumed.
Clear Ergo Mug
The Clear Ergo Mug is an easy to hold cup with an extra wide handle and grooved gripping surface. It is intended for users with decreased grip strength, wrist pain, hand deformities, or who have trouble keeping wrists in a neutral position. A small finger rest opposite the handle allows the user to lift with both hands, reducing the risk of spills. Graduation markings and translucent plastic make it easy to see how much fluid is consumed.
The Drink Holder-Clip-On is designed for people with mobility disabilities. The two sides are notched out to accommodate cups with handles and glasses. A plastic-coated steel spring clip grips tubular furniture, wheelchairs, and beds.
Hydrant Sports Drinking Bottle
The Hydrant Sports is a drinking bottle is designed for people with upper extremity disabilities. It enables those with poor grips to easily hold and drink beverages with no assistance needed. The ergonomic indentations allow for a comfortable grip.
Sure Grip Cup
The Sure Grip Cup has a special designed lid that makes it possible to drink without the need to raise the head. The flow of fluid can be controlled by sipping on the mouthpiece or by placing the fingers over the vent holes in the lid, if the user does not have the sucking ability. The cup promotes independent drinking, reduces the need for caregiver assistance, enables the user to drink while lying down and reduces the risk of choking. Spill-resistant even when tipped over. Ergonomic design is
Replacement Lids for Sure Grip Cup
Replacement Lids for Sure Grip Cup is a lid specially designed to allow the user to control the flow of fluids even when lying down. This reduces the risk of choking and promotes independent drinking reducing the need for caregiver assistance.
Sure Grip Cup Handle
The Sure Grip Cup Handle is an optional handle attachment that easily clips to the Sure Grip Cup which makes it possible for the user to hold the cup with little or no grasp. It is designed for people with grasping disabilities.
Ableware Bedside Beverage Holder by Maddak
The Ableware Bedside Beverage Holder by Maddak is a cup holder for individuals confined to beds and/or wheelchairs who are do not have the ability of holding a cup, bottle, or mug in their hand. The Bedside Beverage Holder clamps to most tubes on beds or wheelchairs. It is easy to attach, adjust, and relocate. It holds bottles and mugs with handles and position drink within reach.
Maddak Type Aid
The Type Aid helps people with limited functional hand skills to accurately press keys. Can be used on keyboard, typewriters, adding machines, calculators, and telephones. Can also be used on microwaves and other push button key pads. It will not damage machine keys.
Do-Eat Performance-Based Assessment Tool for Children
Do-Eat Performance-Based Assessment Tool for Children is a performance-based assessment tool for children with developmental coordination disorder (DCD), attention deficit hyperactivity disorder (ADHD), and both verbal and non-verbal learning disabilities. Features of this assessment tool include:
Mboss Sock and Stocking Aid
The Mboss™? Sock and Stocking Aid is a product designed for those with arthritis or for those who have difficulty bending down bending or lifting their legs to allow them greater independence and the ability to dress easier. While being flexible, the Mboss is also just rigid enough to stay open after the sock or stocking has been loaded, allowing the foot easy entrance. Once the foot and heel are inside, the three fingers gently bend to accommodate their contours. The smooth inner surface allows
This Dressing Stick is a product designed for individuals who has difficulty bending, a limited range of motion, or the use of only one arm or hand. A plastic coated combination hook/pusher assists in putting on shirts and jackets, pulling up slacks or skirts, or removing socks. The small hook on the opposite end aids in pulling zippers and shoelace loops.
Rotating One Hand Button Aid and Zipper Pull, Model F738860005
The Rotating One Hand Button Aid and Zipper Pull, Model F738860005 is a dressing aid designed for people with the use of only one hand. Allows the user to complete the entire buttoning process with only one hand. The foam handle provides an excellent grip and rotates to provide flexibility in getting a grip on the button and pulling it through the button hole. The brass hook at the other end is useful for pulling zippers.
Maddadapt II Teaspoon, Model F746200010
The Maddadapt II Teaspoon, Model F746200010, is an adapted eating utensil designed for those with arthritis and those with upper extremity weakness or reduced range of motion. These stainless steel utensils feature built-up handles for people with arthritis, weak grasps, or other hand limitations. Their contoured shape makes them easier to hold and use. Top rack dishwasher safe.
The Lighted Magnifier is designed for use by individuals with low vision. Useful for people with limited eye-sight. Enlarges fine print to 4X its original size. It features a 1 1/4 inches (3.2 centimeters) square unbreakable clear lens and a sharp focused flashlight. Operates on two AAA batteries (supplied). The bulb is activated only when thumb switch is depressed.
Slipos Slim Gel-Fit Metatarsal Pad
The Silipos Slim Gel-Fit Metatarsal Pad is an elastic metatarsal sleeve with gel pad that eases pain under the ball of the foot caused by metatarsalgia, calluses, rheumatism, neuromas or long hours on the feet. The triblock polymer gel pad is infused with medical grade mineral oil that moisturizes and softens the skin while cushioning and padding the ball of the foot. Thin and compact, it is suitable for everyday use and can be used with most dress, casual, or athletic shoes with or without hosi
No-Tip Cup Keeper
The No-Tip Cup Keeper is a cup stabilizer is designed for use by individuals with upper extremity disabilities. The device is designed to prevent cups from tipping over and spilling. The cup stabilizer fits all Flo-Trol cups and any drinking glass with a 2 1/4 inch diameter. Measures 4 7/8 inch diameter at the base. Cup not included.
Flo-Trol Convalescent Vacuum Feeding Cup
The Flo-Trol Convalescent Vacuum Feeding Cup is designed to control drinking speed for individuals who have trouble grasping or swallowing. The device permits dribble-free drinking without the need to sit up or raise the head. The user controls the flow of liquid by placing a finger over the vent hole in the cap. The design reduces the amount of spilled liquid should a mishap occur. The hole in the mouthpiece is large enough for a straw.
Wheelchair Cup Holder (model # F706220001)
Wheelchair Cup Holder is a plastic cup holder that has slotted on two sides to hold a cup with handles and is accessible to left or right-handed people. It can also hold a glass, can or bottle, including mugs with handles. The plastic clamp has a large easy-to-tighten lever knob. The clamp fits a 1 inch (2.5 centimeter) diameter tube and comes with a sleeve to reduce it to fit 7/8 inches (2.2 centimeter) tube frames.
Hinged Elevated Toilet Seat – Standard
The Hinged Elevated Toilet Seat – Standard is designed for individuals with mobility disabilities or arthritis. The device features a seat riser made of two parts that are hinged together, allowing the ring to be lifted in the same manner as the users regular toilet seat. The seat is installed using the existing toilet seat and lid and does not appreciably change the appearance of the toilet. It elevates the seating position by 3 inch for easy sitting and rising. Supports up to 350 pounds. Hardw
Secure-Bolt Hinged Elevated Toilet Seat - Standard
The Secure-Bolt Hinged Elevated Toilet Seat - Standard is designed for use by individuals with mobility disabilities or arthritis. The device bolts onto the toilet for a safe and permanent attachment. The mounting bracket has been redesigned to allow for a smooth hinging motion. It elevates the seating position by 3 inch for easy sitting and rising. Supports up to 350 pounds.
Easy Grip Cup
The Easy Grip Cup is a lightweight cup designed for use by individuals with limited strength and reduced gripping capabilities. The conical shape makes the cup easy to grip and hold for individuals with both small and large hands. The cups stack for storage, and can be used with hot and cold liquids.
The Straw Holder is a clip-on device that eliminates the need to hold the straw designed for individuals with upper extremity disabilities or for people who are unable to hold or drink from a glass. The device mounts onto the edge of any glass or cup to keep a drinking straw in position. It will fit any straw up to 3/8 inches (.95 centimeter) outside diameter.
Hydrant Replacement Tube and Mouthpiece
The Hydrant Replacement Tube and Mouthpiece is designed for people with upper extremity disabilities. The water bottle is designed to handle and keep liquids within easy reach and can be attached to wheelchair and hospital beds. It includes a 44-inch long drinking tube with a mouthpiece and a clip for attaching the tube to clothing.
RTTS - Optional Hardware Kit
The RTTS - Optional Hardware Kit is designed for use by individuals with balance or mobility disabilities. It has two distinct uses. It has an “arms up” or armrest installed in order to help people who have difficulty rising from or lowering to a toilet but don’t need an elevated seat or grab bars. Additionally, installed with the “arms down” it’s an extended platform to help wheelchair user’s transfer on to and off of the toilet.
Total Hip Replacement Tall-Ette - Standard
The Total Hip Replacement Tall-Ette - Standard is designed for persons who are recovering from hip-pinning, pelvic arthroplasty, a fractured pelvis, or a broken leg, as well as those afflicted with arthritic knees and hip or spine problems. The device keeps user’s legs abducted in the proper position. The “saddle” type seat prevents internal rotation as well as adduction at the hip. This can help reduce the effects of spasticity occurring in people with cerebral palsy or other muscle tone affect
All Gel Toe Spreaders 2 Medium/2 Large
The All Gel Toe Spreaders is designed to relieve pain caused by overlapping toes or bunions and relieve pressure and friction between toes. They align and straighten toes with gentle constant pressure. The gel spreaders comfortably fit between toes to absorb pressure. Constructed from a triblock polymer gel that has medical grade mineral oil infused throughout the whole gel, the spreaders continuously moisturize and soften the skin while providing relief and comfort from overlapping toes, bunion
Silipos All Gel Toe Separators
The Silipos All Gel Toe Separators are designed to relieve pain caused by soft corns, overlapping toes, nail problems, and bunions. They relieve pressure and friction between toes and align and straighten toes with gentle constant pressure.
The Ergowriter is an easy grasp pen designed for individuals with upper extremity or fine motor disabilities or arthritis. It is designed to alleviate the pain of writing associated with arthritis and other hand afflictions. The device correctly positions the thumb to reduce the stress placed on the wrist. This grasp pen can be used with most standard pens and pencils. Blue ink pen included.
Vee-Zee C5 Reacher
The Vee-Zee C5 Reacher is a lightweight reacher designed for children and adults with severe arthritis, spinal injuries, wrist deformities, or minimally functional trunk musculature. It does not require finger function. It is operated from a T-shaped toggle lever at the top, instead of a conventional trigger and can be operated with the mouth. The arm support relieves virtually all stress on the radial side of the wrist while the wrist support prevents non-functional wrist extension. In the case
Redware Basic Tableware
The Redware Basic Tableware is designed for people with fine motors and grasping disabilities. The tableware comes with a Scooper Dish, a Drinking Cup, a Fork, and a Spoon. Each has been specifically designed to assist those with limited muscle control or who can only use one hand to enjoy a good meal. The contoured lip makes it easy to slide food onto silverware while the non-skid base keeps it in place.
No-Sweat Water Bath
The No-Sweat Water Bath is designed for individuals with circulatory disabilities in the lower extremities, and is ideal for soaking injured, sore or aching hands, arms, feet and ankles. This water bath can be used with either hot, warm, or ice water to alleviate pain and reduce recovery time. It is stackable and convenient for use at home, in therapy rooms, and sports medicine clinics. It is constructed from expanded polymer foam, is lightweight, impervious to moisture and odor, and will not sw
Hydrant Cleaning Kit
The Hydrant Cleaning Kit is designed for individuals with limited mobility as a result of back surgery, neurological disorders, or spinal cord injuries. The cleaning kit includes a flexible spring wire with a nylon brush on the end for cleaning the hose, a large nylon brush for cleaning the bottle and a small nylon brush for cleaning the cap and mouthpiece.
The Lotion Applicator is designed for users with limited upper extremity strength and/or range of motion. The device is intended to assist with rubbing or spreading medications, lotions, suntan oils, and sports creams on out-of-the-way areas with ease. The 12-inch built-up ribbed handle has a thumb rest and is angled in two spots for maximum motion. The sponge can be removed when worn and replaced with a new one.
Supreme Sock Aid
Supreme Sock Aid is a flexible sock aid to make putting on socks easier for people who have difficulty bending or lifting their legs. It is designed for individuals with mobility issues to help them put on their socks. While being flexible, the Supreme Sock Aid is also just rigid enough to stay open after the sock has been loaded, allowing the foot easy entrance. Once the foot and heel are inside, the three fingers gently bend to accommodate their contours. The smooth inner surface allows the fo
Bath Safe Adjustable Shower Seat with Arm and Back
Bath Safe Adjustable Shower Seat with Arm and Back is a shower seat with back designed for people with balance and lower extremity disabilities to use while bathing. Back and arms are removable. Built-in hand held shower spray holder in seat. This seat and back are durable and rust-proof.
Arm Escort- Left Arm, Large
The Arm Escort- Left Arm, Large is designed for individuals with carpal tunnel syndrome, upper extremity disabilities, arthritis, tendonitis, or other wrist and hand pain. It helps to protect and support the hemiplegic (paralyzed) arm during all aspects of functional mobility, including transfers. Increases awareness and management of the upper extremity and reduces the risk of injury during transfer and ambulation. The two-piece design consists of a wrist support and a 54 inches long heavy duty
Children's Chaise Seat
The Children's Chaise Seat was designed for bathroom use but works well in other parts of the home and even outdoors. The seat and back rest offer a comfortable recline, while accommodating a wide range of different sized children with adjustable belts. The Children's Chaise Seat only weighs 12 pounds but supports up to 200 pounds.
Eye Drop Guide
The Eye Drop Guide is assistive technology designed for those people with low vision or the visually impaired to safely administor their own eye drops. Clips into place and positions the bottle at the correct angle over the eye. Special cup prevents blinking by keeping the lower eyelid open while a small pinhole directs eyesight upward and away from the descending drops. This plastic eye drop guide holds an eye drop bottle steady for persons that are blind or visually impaired.
Typing Aid Button Pusher
This Typing Aid Button Pusher is assistive technology designed for those individuals with limited dexterity to help them type accurately. Fits on the hand. Rubber tip will not damage keys. Helps users with limited functional hand skills.
Clear Adult Eating Bib with Cuff
The Clear Adult Eating Bib with Cuff is a product designed for those individuals with eating and upper extremity disabilities to protect their clothing from spills and stains. Cuff along the bottom catches food crumbs. Wipes clean in minutes.