Suitcase Ramps are portable ramps designed for use by individuals with mobility disabilities. These hinged tracks have a non-skid surface and cover gaps, curbs, and steps. A nylon carrying case is included. DIMENSIONS: All models are 30 inches wide. These ramps are available in 3, 4, or 5 foot lengths. WEIGHT: The 3 foot model weighs 15 pounds, the 4 foot model weighs 21 pounds, and the 5 foot model weighs 26 pounds.
E-Z Access Ramp (Models Raez0110, Raez0120, Raez0130, Raez0140, Raez1110, Raez1120, Raez1130, Raez1140, Raez1510, Raez1520, Raez1530, Raez1540, Raez2150, Raez2160, & Raez2170)
The E-Z Access Ramp is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a 1:12 slope and can be installed on any surface at interior or exterior thresholds. It has a slip-resistant, scuff-resistant surface, and can be cut to exact size and covered with carpet. DIMENSIONS (HxLxW): 7/8 x 6 x 42 inches (model RAEZ0110), 7/8 x 6 x 60.5 inches (model RAEZ0120), 7/8 x 6 x 69.5 pounds (model RAEZ0130), 7/8 x 6 x 78.5 inches (model RAEZ0140), 1.25 x
Ascension Virtuoso (Models 4860P And 5460P)
The Ascension Virtuoso are portable wheelchair lifts designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. These lifts do not have an access ramp so that a person can enter it directly from street level. The lifts consist of a drive system, passenger platform and doors or gates, all mounted on casters for portability. The casters lock, and the lift will not operate when they are not locked. The platform is enclosed on
Ez-Access Modular Ramp
The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations.
Aluminium Threshold Ramp
The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.
Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)
The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe
Suitcase Ramp (Model Ramp-Sf)
The Suitcase Ramp, model RAMP-SF, is a folding portable ramp designed for use by individuals who use wheelchairs. The ramp's surface has a serrated grip with debris slots. The ramp folds for transportation. DIMENSIONS (LxW): 72 x 28 inches. CAPACITY: 500 pounds. WEIGHT: 33 pounds.
Residential Vertical Lift
The Residential Verical Lift is a home elevator designed for use by wheelchair users and individuals with balance, lower extremity, or mobility disabilities. This elevator comes fully assembled and can be used indoors or outdoors. It can be disassembled into three components (the legs, the carrier, and the tower) for installation in a house with narrow doorways. It has an alternating current (AC) motor with a screw drive; keyed, constant pressure controls and emergency stop; weather-resistant sw
Double Bar Handrails
Double Bar Handrails are handrails designed for use on wheelchair ramps to provide support for users with balance or walking disabilities. The railings are made from galvanized or schedule 40 steel and are designed for permanent or semi-permanent installation. They come in sections which can be used individually or as a component of a larger ramp system. Double bar construction provides an added level of safety by adding a second support bar 16 inches below the handrail bar. Railings can be moun
Vertical Picket Hand Rails
Handi-Ramp Vertical Picket Hand Rails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of high-grade galvanized or schedule 40 steel, these rails have vertical pickets for safety. They can be mounted onto a Handi-Ramp ramp system by bolting them on or by sliding them into receiver tubes which are welded onto the system, and are secured by bolts or quick- release pins. Therails are available with or without a ramp system. DIMENSIONS:
The Suitcase Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair or scooter access over curbs, steps, and doorways. The ramp accomodates wheelchairs and scooters with various wheel configurations. To operate, the hinged ramp is unfolded and positioned for maximum safety and support. Its single-fold design allows it to be folded in half lengthwise to be carried like a suitcase when not in use. The ramp includes a
Rubber Threshold Ramp
The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri
The Threshold Ramp is an accessible threshold designed to enable wheelchair users to get through dooways and over thresholds. This low profile aluminum unit can adapt a doorway or threshold from 1 to 4 inches in height. Its top lip seamlessly covers the existing threshold for a smooth transition. The ramp is constructed from welded aluminum with a permanent skid resistant surface, and can be used indoors or outdoors. DIMENSIONS (LxW): 6, 12, 18, 24, or 36 x 30 or 36 inches. WEIGHT: 6 to 28 pound