The Quad Reacher is fabricated of stainless steel and aluminum. and is designed to allows individuals with limited hand function to reach and pick up assorted items by extending the wrist. DIMENSIONS: Made for either the right or left hand; 20 or 26 inch lengths. WEIGHT: 11 ounces.
Modified Arm Positioner
The Modified Arm Positioner is a balanced forearm orthosis that attaches to wheelchairs to permit individuals with limited arm movement to perform keyboard or desk activities. The positioner is adjustable forward, backward, up or down. A ball bearing swivel allows free horizontal motion.
Adjustable Knee Spreader
The Adjustable Knee Spreader is a separator designed to maintain the knees in slight abduction while sitting. The device is made of chrome plated steel and aluminum, and lined with plastazote for pressure distribution. Thigh circumference is adjustable. DIMENSIONS: Width is adjustable from 3 to 6 inches.
Adjustable Trunk Supports
The Adjustable Trunk Supports are lateral supports designed to assist in positioning the body of wheelchair users. The supports mount to the side frame of wheelchairs.
Urinal Bag Clamp
The Urinal Bag Clamp is a catheter drain valve made of metal that attaches to the drainage tube of leg bags. The spring clamp is designed for operation without finger dexterity, and is opened by inserting the thumb or finger under a lever and pushing outward.
Short Opponens Orthosis Kit
The Short Opponens Orthosis Kit is designed to opposes and abduct the thumb and serves as a foundation for accessories. The orthosis is aluminum with beveled edges, felt or plastazote padding, and a leather wrist strap with buckle. The brace does not extend beyond the wrist. Finger and joint accessories available. SIZES: Based on the measurement taken at the widest part of the MP joints. Small (up to 2.75 inches), Medium (2.75 to 3.25 inches), and Large (over 3.25 inches). Right or left hand.
Long Opponens Orthosis Kit
The Long Opponens Orthosis Kit is designed to oppose and abduct the thumb, give support to the wrist, and serve as a foundation for accessories. The brace is aluminum with beveled edges, felt or plastazote padding, and two leather straps with buckles. The orthosis extends approximately 6 inches beyond the wrist. OPTIONS: Finger and MP joint accessories available. SIZES: Based on measurement taken from the widest part of the MP joints. Small (up to 2.75 inches), Medium (2.75 to 3.25 inches), and
Ulnar Deviation Orthosis Kit
The Ulnar Deviation Orthosis Kit is a brace designed to prevent ulnar deviation of the fingers in arthritic hands. The splint features plastic finger loops that are individually adjustable, stainless steel and aluminum construction, a leather wrist strap, and felt padding. The brace is available with or without wrist extension. SIZES: Small (up to 3.25 inches across the MP joints) or Large (over 3.25 inches across the MP joints). Right or left.
Hemiplegic Hand Orthosis
The Hemiplegic Hand Orthosis is a Kydex and aluminum hand orthosis designed to replace the hemiplegic platform splint. The Volar Kydex hand and thumb piece is adjustable with a heat gun; the dorsal aluminum arm frame is padded with Plastazote, and the wrist hinges can be locked at any angle and set with the rivet. The brace is secured with a Velcro closure. SIZES: In the kit, Small (for up to 3.25 inches across MP joints), and Large (over 3.25 inches across the MP joints); Assembled orthoses, or
Flexor Hinge Hand Orthosis Kit
The Flexor Hinge Hand Orthosis Kit is a metal, flexor hinge orthosis available with an adjustable actuating lever to permit prehension in 5 positions. Shorter finger pieces allow more finger pad exposure. The interior surfaces are padded with felt. Dacron loop straps fasten over metal pins. SIZES: For right or left hand; Small (up to 3.5 inches across the MP joints), and Large (over 3.5 inches across MP joints).
Hill Holders are incline holders designed to prevent roll back on hills or ramps when a wheelchair user changes grip on the handrim or rests. These wheelchair attachments are easily engaged or disengaged, and do not require finger dexterity. These wheel locks fit most wheelchairs with removable arms.
The Knee Spreader is an abductor designed to maintain the knees in a slightly separated position while sitting. The separator is made of chrome plated steel and aluminum with a plastazote lining for pressure distribution. Thigh circumference is adjustable. This device is washable. SIZE: Standard size provides for 5.5 inches of knee spread. Custom sizes available through special order.
These reachers feature a vertical grip, voluntary opening, and rubber bands that control the closing pressure. DIMENSIONS: 20 or 26 inch lengths.
Lever Hand Punch
The Lever Hand Punch is a hand punch for metal or plastics with burr free holes. The punch comes with 7 round punch and die sets. Punch makes holes from 3/32 to 1/4 inch. A bench mount base is available separately ($15).
Wrex - Wilmington Robotic Exoskeleton
The Wilmington Robotic EXoskeleton, also called WREX, is a functional upper limb orthosis designed to enhance movement for individuals with neuromuscular disabilities of the upper extremity, including cerebral palsy, spinal cord injury (SCI), multiple sclerosis (MS), and amyotrophic lateral sclerosis (ALS). Its lightweight exoskeleton approximates normal human anatomy. Linear elastic bands are used both for balance and to assist movement in three dimensions against the effects of gravity. These