The Pil-O-Splint is a wrist and forearm splint designed for use by individuals with repetitive stress disabilities, arthritis, tendonitis, or neurological disabilities. Made of a soft, flannel-like material with cushioned foam and rigid stays, this splint immobilizes the hand, wrist, and fingers. The palm rests on a small pillow while the hand and wrist remain in a neutral position. Available in standard and wraparound models, the splint can be worn while sleeping and the extended length keeps t
Jacknobber Ii (Model Nc92201)
The Jacknobber II, model NC92201, is a massager designed for use by individuals with muscle stiffness or pain or who require tactile stimulation. This hand-held massager features two small knobs and two large knobs. Each knob is designed to glide easily over a person's neck, back, feet, arms, and legs. It can also be placed on the floor or against a wall to vary massaging exercises.
Phoenix Extended Outrigger
The Phoenix Extended Outrigger is a hand orthosis designed for use with individuals with radial nerve injuries or other disabilities of the hand. When mounted to a thermoplastic splint base (not included), this unit positions the wrist and the metacarpophalangeal (MCP) joints in extension while allowing active functional hand use. The splint design ensures minimal coverage of the palmar surface of the hand, allowing increased sensation. The set includes a dorsal outrigger, four pre-tied finger s
Merit Final Finger Flexion Kit
The MERiT Final Finger Flexion Kit is a finger flexion splint kit designed for use with individuals with disabilities of the hand or fingers. This splint aids in achieving end range flexion of the metacarpal phalangeal (MCP), proximal interphalangeal (PIP), and distal interphalangeal (DIP) joints simultaneously. The static progressive component can be used with a single finger or modified to accommodate multiple digits or the MCP or IP joint of the thumb. The splint delivers sustainted controll
Reverse Finger Knuckle Bender Splint
The Reverse Finger Knuckle Bender Splint is a dynamic finger extension splint designed for use by individuals with disabilities of the fingers. This splint extends the proximal interphalangeal (PIP) joint through rubber band traction in conjunction with three points of pressure. Constructed of stainless steel with felt pads, the splint enables tension to be adjusted by varying the size of the rubber bands (no.10 rubber bands are included). SIZES: Extra small, small, medium, large, and extra larg
Finger Knuckle Bender
The Finger Knuckle Bender is a dynamic finger extension splint designed for use by individuals with disabilities of the fingers. This splint extends the proximal interphalangeal (PIP) joint through rubber band traction. Constructed of stainless steel with felt pads, the splint enables tension to be adjusted by varying the size of the rubber bands (##10 rubber bands are included). SIZES: Extra small, small, medium, large, and extra large.
Easyglider Walker Tips
The EasyGlider Walker Tips are walker glide tips designed for use by individuals who use walkers. These dish-shaped tips fit over the rubber tips on the back legs of a two-wheeled walker for increased maneuverability on any surface. The tips attach without tools. DIMENSIONS: 3 inches in diameters; fits standard 1.125-inch tips. COLOR: Bright yellow.
Anthro Tall-Ette Elevated Toilet Seat
The Anthro Tall-Ette Elevated Toilet Seat is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities. Made of polyethylene plastic, this seat unit slopes on either the left or right side and raises the toilet seat permitting the user to extend the leg without bending. The seat requires less than 90-degree hip flexion. The unit comes with a Lok-In El bracket that easily slides under the hinge pin of the existing toilet seat while two large posts mate
Thera-Band Latex Exercise Bands
Thera-Band Latex Exercise Bands are progressive resistance exercise bands designed for use by individuals with upper or lower extremity disabilities. Made from stretchable latex, the bands can be used for passive or active exercise or therapy. Bands come in 8 color-coded levels of resistance, and are available in individual lengths or in rolls that can be cut to size as needed. When properly used, they provide both positive and negative force on the muscles, improving strength, range of motion
Palm Cone With Finger Separators (Model 5609)
The Palm Cone with Finger Separators, model 5609, is a hand cone designed to prevent finger contractures for people who have had strokes or who have other upper extremity disabilities. This machine-washable cone-shaped device conforms to the hand's natural shape and its protrusions keep fingers separated. The terry cloth cover absorbs moisture and the attached elastic band secures the cone in the proper position. DIMENSIONS: 5 inches long.
Superpole & Superpole Bariatric
The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a
The Winsford Feeder is a height-adjustable powered feeder designed to enable individuals with quadriplegia or other upper extremity disabilities to independently feed themselves soup or any solid food that can be cut into small enough pieces . The height adjustment is accomplished using the large knob on the device. The unit includes a carrying case, a Corelle dinner-sized plate, a soup/cereal bowl, pusher, chin switch, glass holder, turntable, shelf, plug-in rocker switch, and drip pan. To eat
Zim Wall Mount Jar Opener (Models Z-3)
The Zim Wall Mount Jar Opener, model Z-3, is a jar and bottle openers designed for use by individuals with grasping disabilities and limited strength or motion in the hands or arms. The Z-3 is made of steel and mounts securely on a wall. It can open screw-top or pop-top bottles up to 3.5 inches in diameter. Mounting screws are included.
Care Spoons are small feeding spatulas or spoons designed for use with individuals with eating or swallowing disabilities. These dishwasher-safe plastic spoons have small bowls and smooth, rounded edges for safety. SIZES: Small or Large. DIMENSIONS: Spoons are 6 inches long and 0.5 inch in diameter. The large spoon has a 1.25 inch bowl and the small spoon has a 1 inch bowl.
Norco English Sock Aid (Model Nc28661)
The Norco English Sock Aid, model NC28661, is designed to assist people with difficulty in bending to don socks. The sock trough is formed of lightweight, flexible plastic and features side indentations to hold socks in place. The unit includes a 32-inch long cotton strap that can be adjusted by cutting or knotting into a shorter loop.
Norco English Pantyhose Aid (Model Nc28662)
The Norco English Pantyhose Aid, model NC28662, is a stocking aid designed to assist people with difficulty in bending to don pantyhose and tights. The double stocking troughs are formed of lightweight, flexible plastic and feature side indentations to hold socks in place. The unit includes a 32-inch long cotton strap that can be adjusted by cutting or knotting into a shorter loop.
Featherlite Reacher (Models Nc28521 & Nc28522)
The Featherlite Reacher, is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw, allowing the device to grip both small and large objects. The reacher also features a lug on the top for pulling or pushing objects and a magnet in the tip for pickin
Reacher (Model Nc23621)
The Reacher, model NC23621, is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip, a lightweight, unbreakable plastic claw, and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw, allowing the device to grip both small and large objects. The reacher also features a 0.75-inch tall metal lug on the top
Lower Extremity Dressing Kit (Models Nc28575, Nc28576, & Nc28628)
The Deluxe Dressing Stick, models NC28575, NC28576 and NC28628, is designed to help those with limited reach and physical disabilities put on and remove clothing. The birch shaft features a plastic-coated, two-pronged hook at one end and a smaller single hook at the other end. DIMENSIONS: The stick is 5/8 inch in diameter and 27 inches long (NC28575), 18 inches long (NC28576), and 27.5 inches long (NC28628, collapsible to 14.5 inches). WEIGHT: 5 ounces (NC285575) and 3 ounces (NC28576).
Workmod Wrist Saver (Model Nc73580)
The WorkMod Wrist Saver, model NC73580, is a keyboard wrist support designed to stabilize the wrist in the correct position for typing to minimize fatigue and repetetive motion injuries. The device consists of a platform which slides under and elevates any keyboard at the correct angle and a wrist rest that extends along the width of the keyboard. The unit includes a grounding cord for static control.
Quantum Reacher (Models Nc28555, Nc28556 & Nc28557)
The Quantum Reacher is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip, a neoprene-lined plastic claw, and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw and to lock the claw in position. The reacher also features a hook on the top for pulling objects or dressing assistance, and a magnet in th
Arcmate E-Z Reacher
The ArcMate E-Z Reacher is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic handle, a pair of flexible aluminum claws with round rubber suction grips, and an aluminum shaft. The reacher is designed for one-or two-handed use and can hold items weighing up to two pounds. Folding and locking models are available. SIZES: Compact, standard, folding. DIMENSIONS: The standard and fol
Button Hook/zipper Pull Combo (Model Nc28635)
The Button Hook/Zipper Pull Combo, model NC28635, is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the birch handle has a button hook imbedded in it and the opposite end holds a zipper pull. DIMENSIONS: The device is 8.25 inches long and the handle is 5/8 inch in diameter.
Grip Handle Button/zipper Pull Combo (Model Nc28616)
The Grip Handle Button Hook/Zipper Pull Combo is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the ribbed rubber handle has a button hook imbedded in it and the opposite end holds a zipper pull. DIMENSIONS: The unit is 8.25 inches long and the handle is 1 inch in diameeter.
Ring Zipper Pull
The Ring Zipper Pull is designed to assist individuals with difficulties grasping small objects to work zippers. The metal ring attaches to zipper tabs with the attached clasp. DIMENSIONS: The ring is 1 inch in diameter.
Norco Molded Sock Aid (Models Nc26600 & Nc26602)
The Molded Sock Aid, models NC26600 & NC26602, is designed to assist people with difficulty in bending to don socks. The trough is shaped from semi-flexible plastic and can be adjusted using a heat gun. The NC26600 model comes with a cord handle and can be used with one or two hands. The NC26602 comes with two cord handles and features soft foam grips. DIMENSIONS: The cord handle is 33 inches long and can be cut to adjust length.
Stainless Steel Shoehorn (Models Nc28601, Nc28602, Nc28603 & Nc28604)
The Stainless Steel Shoehorn, models NC28601, NC28062, NC28603 & NC28604, is a long-handled shoe horn with a curved hook and a vinyl handle for an easier grip. DIMENSIONS: The NC28601 model is 12 inches long, NC28602 is 18 inches long, NC28603 is 24 inches long, and NC28604 is 30 inches long.
Norco Plastic Shoehorn With Hook (Model Nc28590)
The Norco Plastic Shoehorn with Hook, model NC28590, is a long-handled shoe horn with a curved handle for an easier grip. The shoehorn includes a nylon loop for hanging. DIMENSIONS: 16.25 inches long.
Norco Elastic Shoelaces (Models Nc28681, Nc28686, Nc28689, Nc28734, Nc28735, & Nc28736)
The Norco Elastic Shoelaces, Models NC28681, NC28686, NC28689, NC28734, NC28735 and NC28736, are designed for individuals who have trouble tying laces due to loss of finger dexterity or the ability to bend over. These laces require tying once; afterwards, the laces stretch so that the foot can slip into and out of a shoe with the aid of a shoehorn but without having to undo the laces. DIMENSIONS: The lengths are 24 inches for NC28681, NC28686 and NC28689; and 37 inches for NC28734, NC28735 and N
TheraPutty is a therapy putty designed to serve as a hand and finger exerciser for people requiring strengthening or increased dexterity. The silicone rubber putty provides a range of resistance from super-soft to extra-firm, with the firmness indicated by color. A plastic storage cup is included. The TheraPutty is available in various softness and firmness: super-soft, extra-soft, medium-soft, medium, medium firm, firm, and extra-firm. COLORS: Available colors are white, light blue, turquoise,
Akros Gel-Cell Cushions (Models Nc28395 & Nc28396)
Akros Gel-Cell Cushions are gel and foam seat cushions designed to be used in wheelchairs to prevent pressure sores and provide extra comfort for the user. The patented gel cell and foam construction provides a stable surface and helps prevent bottoming out. The cushion features a waterproof Staph-Chek inner cover and a washable cotton/polyester outer cover. DIMENSIONS (WxDxH): Model NC28395 is 16 x 18 x 2 inches and model NC28396 is 16 x 18 x 3 inches. WEIGHT: The cushions weigh between 6 and 7
Deluxe Transfer Board (Models Nc94205 & Nc94205-B)
The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942
Utensil Holder (Model Nc35344)
The Utensil Holder, model NC35344, is designed to assist people with limited grasping ability or hand strength in holding a variety of utensils, including eating utensils, pens and pencils, and toothbrushes. The device consists of a cotton pocket affixed to a velcro strap with a D ring to assist in putting on, removing, and securing the holder.
Norco Push Kuffs (Model Nc94320)
The Norco Push Kuffs, model NC94320, are leather wheelchair push gloves designed to protect the hand from callouses and cuts. The cuffs cover the palm and back of the hands, leaving fingers exposed. The palm features a thick protective pad. The gloves are secured with hook and loop closures.
Adl Lap Tray (Model Nc94114)
The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.
See-Thru Work Tray (Model Nc94102)
The See-Thru Work Tray, model NC94102, is a lapboard designed to provide a work, eating, and activity surface for people who use wheelchairs. The clear tray is made of polycarbonate and bordered with an all-aluminum lip on the front and sides. The tray has a hook and loop straps that attach onto wheelchair armrests. DIMENSIONS (WxD): 23.5 x 19 inches. The width of the oval space in front of the user's stomach is 15 inches.
Norco Adaptable Wire Basket (Model Nc94326-1)
The Adaptable Wire Basket, model NC94326-1, is a plastic-coated steel wire basket designed to carry small, lightweigtht items for people who use folding or standard walkers. The basket attaches to the walker's side frame and front cross bar and can be bent to ensure a perfect fit. DIMENSIONS (HxLxW):7 x 18 x 7 inches. WEIGHT: 26 ounces.
Dycem is non-slip matting designed to hold objects in place without permanently adhering to the countertop, tray, table, or other surface. Dycem can be used to keep small items from falling off trays, to hold cups in place to prevent spilling, to prevent bowls from moving during mixing or stirring, as placemats to assist in eating, or in a variety of other ways. Dycem is available in round or rectangular placemats,or in rolls. DIMENSIONS: Available models include a disc 5.5 inches in diameter, a
Cylindrical Foam (Model Nc33000)
Cylindrical Foam, model NC33000, is designed to build up the handles of eating utensils, toothbrushes, small tools, and other items for use by people who have limited grasping ability. The foam features a square hole for holding handles, is dishwasher safe, and can be cut to the required size. DIMENSIONS: 1.25 inches x 1 yard.
Loop Scissors (Models Nc28402, Nc28403 & Nc28404)
Loop Scissors are self-opening scissors designed for use by people with limited grasping ability. The handles of the scissors are connected by a self-opening spring strap. The user squeezes the loop to cut and releases the loop to open the blades. The scissors are available in regular length with rounded tips, model NC28402, regular length with pointed tips, model NC28403, and long length with pointed tips, model NC28404.
Easy Turn Lampswitch Kit (M0Del Nc28750)
The Easy Turn Lampswitch Kit, model NC28750, is a lamp switch extension lever designed to assist people with limited hand strength or grasp in turning lamps on and off. The kit extends the length of the turning knob and provides a large triangular knob for ease in grasping and turning. DIMENSIONS: 1.75 inches in diameter.
Norco Leg Lifter (Model Nc94301)
The Norco Leg Lifter Assist, model NC94301, is a leg lifter and leg positioning aid designed for use by people with physical disabilities. The device consists of an aluminum rod and foothold covered with webbing. A hand loop is located at one end and a larger foot loop at the other. The lifter is covered with 1-inch wide, soft nylon webbing. The 10-inch loop foothold is bendable. DIMENSIONS: The rod is 22 inches long. The total length including hand strap is 42.5 inches.
Deluxe Maple Cutting Board (Model Nc28503)
The Deluxe Maple Cutting Board, model NC28503, is designed to assist people with limited hand strength or with use of only one hand in cutting or chopping food. The cutting board is handmade of solid, finished maple and features wooden food guards on one corner to keep food on the board. The board also has two stainless steel nails imbedded in it to hold vegetables and other foods in place. Rubber feet on the bottom of the unit keep it from sliding while in use. DIMENSIONS: 11 x 11 inches.
Right Angle Utensil Pocket (Model Nc21025)
The Right Angle Utensil Pocket, model NC21025, is a utensil holder accessory designed to enable people with limited grasping ability or hand strength to hold utensils in a vertical position. The pocket includes a metal tab which slides into the utensil pocket of cuffs, holders, clips and wrist supports. Utensils fit into the opening at the opposite end.
Hand Clip (Model Nc35340)
The Hand Clip, model NC35340, is a bracelet-style utensil holder designed to allow people with quadriplegia to hold a variety of utensils, including eating utensils and toothbrushes. The device consists of a braclet which slips over the right or left hand and an utensil pocket that adjusts to any angle.
Rocking Knife (Model Nc28237)
The Rocking T Knife, model NC28237, is designed to assist people with limited hand strength or with use of only one hand in cutting or chopping food. The T-shaped knife features a wooden handle and cuts or chops food with minimal pressure by rocking the blade through the food. The knife is dishwasher safe. DIMENSIONS: The stainless steel blade measures 4.5 inches and can be sharpened with a knife sharpener.
Formica Cutting Board (Model Nc28501)
The Formica Cutting Board, model NC28238, is designed to assist people with limited hand strength or with use of only one hand in cutting or chopping food. The formica cutting board includes plastic edge trim and features wooden food guards on one corner to keep food on the board. The board also has two stainless steel nails imbedded in it to hold vegetables and other foods in place. DIMENSIONS: 8 x 10 inches.
Meat Cutter Knife (Model Nc28242)
The Meat Cutter Knife, model NC28242, is a rocker knife designed to allow people with limited hand strength or use of only one hand to cut meat and other foods using a rocking motion. The knife features a stainless steel blade and a wooden handle shaped for ease in handling.
Swedish Bread And All-Around Knife (Model 28238)
The Swedish Bread and All-Around Knife, model NC 28238, is a large-handle kitchen knife designed to assist people with limited hand strength in cutting and chopping foods by requiring minimal pressure. The large handle is affixed to the serrated stainless steel blade at a right angle. DIMENSIONS: The blade is 6.5 inches long.
Ergonomic Kitchen Fork Knife (Model Nc28264-04)
The Ergonomic Kitchen Fork Knife, model NC28264-04, is a combination rocker knife and fork designed to allow individuals with use of only one hand to cut and eat food without switching utensils. The rocker knife blade widens to a four-pronged tip for use as a fork. The utensil has a stainless steel blade and a plastic handle. It is dishwasher safe. DIMENSIONS: The blade is 4.5 inches.
Adl Universal Cuff (Models Nc35337, Nc35338 & Nc35339)
The Universal ADL Cuff, Model H74975, is an adaptive leather pocket attached to an elastic strap designed to hold various utensils (i.e. toothbrush, eating utensils). The cuff may be used by persons with hand weakness or paralysis but with good wrist control. DIMENSIONS: .75 inches wide. SIZES: Small, model NC35337; Medium, model NC35338; or Large, model NC35339.
Economy Wrist Support (Nc35333, Nc35334, Nc35335,
The Economy Wrist Support is a dorsal wrist splint designed to hold a variety of utensils (i.e., eating utensils, toothbrush) for use by people with limited hand strength or paralysis. The leather- covered splint is secured to the forearm, wrist, and hand using Velcro straps. The palm of the hand strap has a fixed position leather utensil pocket built into it. SIZES: The splint is available in adult left hand, model NC35333, adult right hand, NC35334, large adult left hand, model NC35335, and la
Quad Care Utensil Holder (Model Nc28433)
The Quad-Care Utensil Holder, Model NC28433, is a utensil holder designed for use by people who are quadriplegic or who have difficulty grasping utensils. The device consists of a built-up palm block and an attached hook-n-loop strap with a thumb loop. A pocket in the palm block allows a variety of utensils to be inserted for use..
Stainless Steel Food Guard (Model Nc35241-1 & Nc35241-2)
The Stainless Steel Food Guard, models NC35241-1 & NC35241-2, is a metal ring with 3 spring action clips designed to help people with limited manual dexterity keep food on a plate. These food guards are sized for dinner and dessert plates. They are dishwasher safe. DIMENSIONS: The NC35241-1 fits plates with a diameter of 6 to 8 inches. The NC35241-2 fits plates with a diameter of 8 to 10 inches. Both models measure 1.5 inches high.
Surefit Clear Food Guard (Model Nc35244)
The SureFit Clear Food Guard, model NC35244, is designed to assist people with limited manual dexterity to keep food on a plate and to push food onto an eating utensil. The clear plastic guard forms a lip around 2/3 of the plate. DIMENSIONS: The guard fits plates from 8.5 to 10 inches in diameter.
Surefit Plastic Food Guard (Models Nc35213, Nc35213-Bl, & Nc35213-Or)
The SureFit Plastic Food Guard, models NC35213, NC35213-BL and NC35213-OR, is a food guard designed to assist people with limited manual dexterity in keeping food on the plate and in pushing food onto the eating utensil. The molded plastic guard forms a lip around approximately 2/3 of the plate. It is microwave and dishwasher safe. COLOR: White, blue or orange. DIMENSIONS: The guard measures 1.25 inches and fits plates with a diameter of up to 10.75 inches.
Toilet Tissue Aid (Model Nc28708)
The Toilet Tissue Aid, model NC28708, is a toileting aid designed to assist people with physical disabilities with tissue wiping. The aid is designed to fit body curve, and is made of a lightweight alloy with a molded plastic end. The handle includes a hand loop. DIMENSIONS: 10 inches long. The open, vertical handle and the horizontal clamp both measure 6 inches long.
Quad Inspection Mirror (Model Nc28717)
The Quad Inspection Mirror, model NC28717, is designed for use by people who are quadriplegic or who have other lower extremity disabilities. The break-resistant acrylic oval mirror has an adjustable hand loop on the handle and an additional finger loop on the flexible shaft. DIMENSIONS: The mirror is 4 x 6 inches and the shaft is 12 inches long.
Plastic Card Holder (Model Nc29102)
The Plastic Card Holder, model NC29102, is a lightweight playing card holder designed for use with limited grasping ability and manual dexterity. The unit consists of a base with a card slot in the top. DIMENSIONS: 2 x 1 3/8 x 9 inches. The card slot tapers from .5 inch to 1/8 inch.
Automatic Card Shuffler (Model Nc29100)
The Atomatic Card Shuffler, model NC29100, is designed for use by people with limited hand strength or manual dexterity. The unit shuffles one or two decks of cards and features two card slots and a catch tray. POWER: Uses 2 "C" batteries (not included).
Lovision Playing Cards (Model 29109)
LoVision Playing Cards, model NC29109, are standard-size playing cards designed for use by people with low vision. Numbers, letters, and suit characters are enlarged for recognition and each suit is identified by a different color (red, blue, black, or green); corner markers are standard red or black.
Bath And Scrub Sponges (Models Nc28645, Nc28644, Nc28644-2, Nc2864-1 & Nc28650)
The Bath and Scrub Sponges are long-handled sponges designed to assist people with limited reach or difficulty bending with bathing. The sponges are made of soft, non-irritating polyfoam with plastic handles that can be shaped with a heat gun. The sub sponge has a loofah-style surface on one side and is available in the round style. The bath sponges are available with round or contoured styles, and in long or short lengths. DIMENSIONS: The scrub sponge measures 22 inches long with a 5-inch diam
Suction Denture Brush (Model Nc28333)
The Suction Denture Brush, model NC28333, is a denture brush with a suction base designed for use by people with limited manual dexterity or use of only one hand. The brush features a styrene base with two rubber suction feet that secure to most surfaces and firm bristles.
Economy Elevated Toilet Seat (Model Nc28945)
The Economy Elevated Toilet Seat, model NC28945, is a molded elevated toilet seat designed for use by people with mobility disabilities and others who have difficulty in raising and lowering themselves from conventional toilets. The one-piece molded plastic seat features a tapered flange for a secure fit against the toilet rim. DIMENSIONS: The unit adds 4.75 inches to the toilet seat height. COLOR: White. CAPACITY: 250 pounds. WEIGHT: 3 pounds.
Stand Mirror (Model Nc28715)
The Stand Mirror, model NC28715, is designed for use by people with low vision or upper extremity disabilities. The mirror features a round standard mirror on one side and a three-time magnifying mirror on the other. The stand allows the mirror to be used or pivoted without holding or grasping. DIMENSIONS: The mirror is five inches in diameter.
The Writing Bird is a pen or pencil holder designed for persons with limited hand coordination or dexterity, arthritis, neurological disabilities, and weak thumb to fingertip pinch. This writing aid requires using an arm to shoulder motion rather than wrist movement with the fingers in any position, and is used by sliding the unit over the paper. The device comes with a retractable pen held in place at the top of the unit. The device may benefit individuals who need to learn to write with the no
Mini Vibrator (Model Nc70209)
The Mini Vibrator, model NC70209, is a massager designed for use on small muscle areas. The unit includes three natural rubber head attachments (ball, spot, and flat disc) for pin-point areas and the massager cap for wider areas. Each head vibrates at 92 cycles per second with an amplitude of .06 m. POWER: The unit uses 1 "C" battery (not included. DIMENSIONS: 5.25 inches long and 5 inches in circumference.
Isotoner Therapeutic Gloves
Isotoner Therapeutic Gloves are men's and women's gloves designed for use by individuals with arthritis or other hand or wrist injury disabilities. Designed to help prevent swelling of the hands, these gloves provide a gentle and even compression while keeping irritating seams away from tender areas. The open-finger design permits unencumbered movement and the gloves can be worn day or night. The latex free gloves are made of a washable blend of Lycra and Spandex. SIZES: Extra small, small, med
Norco Hand Exerciser (Model Nc52000)
The Norco Hand Exerciser, model NC52000, is a progressively resistive hand and arm exerciser designed to provide people with grasping and upper extremity disabilities with a variety of therapeutic exercises for manual rehabilitation. The unit is constructed of plastic and uses one or more rubber bands to provide adjustable resistance as the user pulls back on the handle. The user can attach additional rubber bands to increase resistance. Five rubber bands are included, each providing approximate
Lite-Touch Pen (Model Nc21020)
The Lite-Touch Pen, model NC21020, is an easy grasp pen designed to allow people who have difficulty grasping writing instruments or exerting pressure to write easily and comfortable. This black ink pen features a built-up barrel with indentations to facilitate holding. The hollow barrel can be filled to provide added weight. The pen is made of lightweight plastic with a clip top. A cap is included.
Writing Grips (Nc21021)
Writing Grips, model NC21021, are pen and pencil holders and triangular finger grips designed to facilitate writing for people who have difficulty grasping writing utensils. The soft plastic grips slide over the barrel of any standard pen or pencil and the bulb design provides a built-up grasping area and encourages proper finger positioning.
Workmod Neck Saver (Models Nc73581 & Nc73582)
The WorkMod Neck Saver is a computer monitor stand designed to elevate and position the monitor to prevent neck and back strain. The steel and chrome arm rotates 360 degrees and is adjustable to 9 inches above desktops. Model NC73581 attaches to the desktop using a clamp; the surface-mount model, no. NC73582, attaches to the desktop using mounting bolts (requires holes to be drilled). CAPACITY: 50 pounds.
Workmod Back Support (Model Nc73585)
The WorkMod Back Support, model NC73585, provides firm lower back support and encourages correct sitting position and posture, eliminating discomfort and fatigue. The cushion can be used on any type of chair and is designed to stay in place during use.
Key Turner Iii (Model Nc28255)
The Key Turner III, model NC28255, is a key holder designed to assist persons with limited wrist strength or movement. The Key Turner III features a heavy-duty plastic handle that provides extra leverage for turning. Keys fold into the handle when not in use. The Key Turner III holds three standard keys. DIMENSIONS (LxW): 4.75 x 0.88 inches. The circumference is 4.13 inches.
Economy Suction Brush (Model Nc28224)
The Economy Suction Brush, model NC28224, is a scrub brush for cleaning vegetables designed for use by individuals with use of only one hand. The brush features stiff nylon bristles in a lightweight plastic base to which rubber suction-cup feet are affixed. The suction-cup feet secure the brush to most flat surfaces during use. DIMENSIONS: The brush is 4 inches long.
The Freedom Writer a pen holder designed to assist people with limited grasping ability or manual dexterity. The device consists of a wide, lightweight, clear plastic base with a hole at the front through which the pen is inserted. The base supports the hand and a gentle downward pressure brings the pen (included) into contact with the paper. A slight withdrawl of the hand lifts the pen to move on to the next word. The device accepts any standard pen or pencil.
Workmod Foot Rest (Model Nc73583)
The WorkMod Footrest, model NC73583, is designed to reduce back pain and fatigue caused by prolonged sitting by supporting the legs and feet in the proper position. The multi-position footrest elevates the feet slightly and the position of the footrest is adjusted using foot pressure.
Artho Thumbs-Up Cup
The Artho Thumbs-Up Cup is a twin handle cup designed for use by children or adults with hand disabilities or arthritis. This cup is equipped with a thumb rest above each handle for stability and easy lifting. Available with or without a lid, the cup is fabricated of lightweight, insulated plastic, is microwave and dishwasher safe, and holds eight fluid ounces. OPTIONS: A replacement lid is available. COLOR: Beige.
Rocker Knife With Solid Handle (Model Nc28272)
The Rocker Knife with Solid handle is designed to allow people with use of only one hand or with limited hand strength to cut food independently using a rocking motion. The stainless steel knife features a sharp, tapered blade.
Zim Undercabinet Jar Opener (Models Z-3 & Z-4)
The Zim Undercabinet Jar Opener is a jar and bottle opener designed for use by individuals with grasping disabilities and limited strength or motion in the hands or arms. The Undercabinet Jar Opener is made of steel and mounts securely on the bottom of a cabinet. It can open jars or screw-top or pop-top bottles up to 3.5 inches in diameter. Mounting screws are included.
The Adapta Helmet is a protective helmet designed to provide head protection for adolescents and adults with balance or mobility disabilities or seizures. This helmet features a molded polyethylene shell with a thick foam inner lining. It has air vents to keep the head cool. The Adapta Helmet fits head circumferences that measure from 16 to 26 inches. OPTIONS: Replacement chin strap. DIMENSIONS: Measures 6 inches from top to ear hole.
Winsford Feeder With Case (Model 124601)
The Windsford Feeder With Case, model 124601, is powered feeder designed to enable people with upper extremity disabilities to feed themselves at their own speed. A slight head motion on the chin switch activates the motorized pusher that fills the spoon, which automatically moves to the mouth. Controlled rotation of the plate selects food for each mouthful. A bowl may be substituted for the plate by removing the plate and pusher and adding the turntable, shelf, and drip pan. A separate knob adj
Norco Bed Pull-Up (Model Nc94302)
The Norco Bed Pull-up is a rope ladder designed to allow individuals with mobility disabilities to independently raise themselves to a sitting position while in bed. The loop webbing attaches to the end of the bed or bed frame, allowing the four loops to provide step-by-step pulling. A hook-and-loop keeps the attaching buckle secure. DIMENSIONS: The loop webbing is 40 inches long.
Therabath is a paraffin bath designed to provide deep heat treatment for joints, muscles, and soft tissue, to encourage relaxation in preparation for exercise, and to soften skin. The portable unit can be used in the home and includes a supply of Theraffin Wax, a special wax blend designed especially for use with the Therabath unit. OPTIONS: Additional Theraffin Wax in 6-pound blocks and a pair of insulated mitts with 50 disposable liners. DIMENSIONS (LxWxH): 13 x 5 x 6.75 inches. WEIGHT: 6 pou
The Prodigy Count-A-Dose is a syringe filling device designed for use by individuals with diabetes who are blind or have low vision. This product consists of two parts: a rectangular base into which the user places a syringe and a T-shaped bar that holds one or two vials of insulin. The user secures a syringe in the rectangular base with the plunger pushed completely in the syringe. Then the T-bar with the vial(s) is fastened to the base so that the needle is inserted into a vial. The user then
Hygenique Deluxe Whirlpool Sitz Bath / Bidet
The Hygenique Deluxe Whirlpool Sitz Bath/Bidet is a portable sitz bath and toilet bidet for people with mobility or upper extremity disabilities. It consists of a molded plastic insert that fits into standard toilet seat; a cleansing wand that attaches to a nearby faucet with a 10-foot hose; and a premium diverter faucet adapter. The insert has an opening that, when left open, allows the product to act as a bidet, gently washing the perineal area. When the door on the insert is closed, the sitz
Power Hand Grip (Model Nc52035)
The Power Hand Grip, model NC52035, is a hand and finger exerciser designed to improve grip strength for people with grasping and upper extremity disabilities. This device has a U-shaped frame with a spring in the middle that provides resistance when the device is squeezed. The Power Hand Grip includes three springs. The user can vary the amount of resistance between 10 and 170 pounds by selecting among the springs and changing the placement of the spring. Resistances levels are marked on one si
Four Suiter Card Holder (Model Nc29103)
The Four Suiter Card Holder, model NC29103, is a playing card holder designed for use by individuals with fine motor or grasping disabilities or arthritis. This wooden holder has four angled slots to hold cards and aid in visibility. DIMENSIONS (WxD): 9.5 x 5 inches. COLOR: Natural wood.
Deluxe Prism Glasses (Model Nc28841)
Deluxe Prism Glasses, model NC28841, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. These non-magnifying glasses have a prism that turns the image 90 degrees so that no head movement is necessary while reading or watching television. These glasses come with a vinyl carrying case.
Universal Turning Handle
Universal Turning Handle is designed to make tasks, such as turning on taps, opening/locking doors, turning stove knobs, dishwasher, or washing machine dials, easier. It is designed to be used by individuals with arthritis. It has a handled that allows the user to grip with both hands if leverage is needed on hard to turn knobs.
Bath Safety Anti-Slipping Treads
Safety Treads help prevent slipping in a shower or tub. Create a skid-resistant surface by applying self-adhesive safety treads to the tub or shower floor. The traction helps improve bathroom safety, creating traction to prevent falls. Apply the treads on non-porous surfaces and in any pattern. Safety treads, sold in packages of twenty waterproof strips, transfer the shower or tub into a non-slip environment.
JarPop Jar Opener
JarPop Jar Opener opens tight, vacuum-sealed jars with little effort. No twisting or turning is necessary, a gentle lift upwards pops the seal, releasing the vacuum pressure so the lid can be removed easily. Lids remain resealable after opening.
Waterproof Cutting Board With Aluminium Food Spikes
Waterproof Cutting Board With Aluminium Food Spikes is suitable for one handed users or those who suffer from an arthritic condition or weak grip. The board is made from high grade polyethylene with aluminium food spikes that keep a food item firmly and hygienically in place. The spikes on the board holds the item to be sliced or diced firmly in place providing the user better control and reducing the risk of accidents.
The Pot Stabilizer is a product designed for those individuals with Ataxia and one hand to safely cook. Suction-cup feet secure the potholder on the stove. Wireframe holds the handle while contents are being stirred. Suction-cup feet secure the potholder on the stove. Wireframe holds the handle while contents are being stirred.